Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7" Wide x 20" long x 6" tall. Excellent for your boat trailer, this aluminum, PVC-coated trailer fender can stand up to rust, corrosion, and scratches. Easily bolt fender onto your trailer.
Features:
Specs:
Rustproof Aluminum Construction
Aluminum offers excellent, long-term defense against rust and corrosion. It is naturally rustproof, unlike steel, which must be treated with a rust-resistant coating that can break down over time. Aluminum is lightweight yet durable, making it suitable for heavy-duty, outdoor, and saltwater applications.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com. We're going to be taking a quick look at the single-axle trailer fender. This protects your trailer and any cargo that you have in it from any rocks getting kicked up and debris getting slung onto that cargo. It also helps keep mud and water from spraying up also onto your trailer. It's going to be a nice diamond-plate design.
It gives it a rugged look. This is also made out of aluminum, so it should last for a long time and be very corrosion resistant.You can see that nice rugged diamond plate going all across the surface. This has a beveled design, or it has a radius on either side, so you will need to have some brackets to mount this in place. It does not come with any brackets, so you will need to purchase those separately. As far as the size of our fender, we go from edge to edge, it's about 20 inches long that over.
So you can see that 20 inches long going from outer edge to outer edge, and then seven inches wide and about six inches tall. It does just come as a single fender. You can use this on either side. It is covered by a one-year limited warranty, and it is made in the USA.That's about all there is to it for our look at the single axle trailer fender in diamond-plate aluminum. I hope this has been helpful in deciding if this is the right fender for you.
We do have a lot of other options available, though, here at etrailer.com, so check them out. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (2607 Customer Reviews)
7" Wide x 20" long x 6" tall. Excellent for your boat trailer, this aluminum, PVC-coated trailer fender can stand up to rust, corrosion, and scratches. Easily bolt fender onto your trailer.These Trailer Fenders are a quality product which are "rust free". It's hard to find an 8" rust free wheel fender on-line. All stainless steel fenders listed on line require you to paint them so they will not rust. This is because since they were stamped/pressed via large machine press at the manufacturing plant, using a flat sheet of stainless steel. When the sheet is pressed it's damaged and will rust.
It was the full set of dimensions in the description that sold me as to what I needed. The steel fenders were short on finished dimension size.
Trailer B.
8/27/2024
It has worked out very well without any problems. It is a good solid product.
Perfect fit.
Worked well replacing my plastic fenders
Very nice
Super fast delivery and products were described perfectly
Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.
The fenders themselves were fine. After having them installed for a while one of the backing plates fell off. I contacted etrailer and they sent me a new fender. I removed the backing plate from that one and riveted on the trailer. No problems since.
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
Great product. I use them all the time for wheel wells.
They worked out great. However the trailer was overloaded and the fenders came down onto the tires ,so the guy who owned the trailer cut the brackets off instead of just unbolting them.
I have to go pickup the trailer and remake the mounting brackets to make them able to just bolt on.
Great looking and functioning fenders. Really thought I would never find fenders for a 1993 boat mate trailer that would fit but these fenders fit great. Sure made my trailer look better.
These fenders were to replace the rusting out fenders on my Four Winns boat trailer. They really spruced it up! The only "modification" I had to do was add an extra 3/8 nut on both sides between the fender and the trailer frame to make it fit. I used all new stainless steel fasteners.
Purchased these replacement fenders 1 year ago for a 20+ year old trailer to replace the original rusty ones. They were a perfect fit and welded on easily. Still looking good 1 year later.
This was used on a box trailer. I had a tire blow out and seriously damaged the original fender. This replacement fit perfectly and looks like the original. Service was also great.
The photos on the website show the backing plate attached symmetrically to the fender. The ones I received had the backing plate attached at an angle (left side 4" from bottom of the fender to the bottom of the backing plate - right side 1" from the bottom of the fender to the bottom of the backing plate). Mounting the fenders symmetrically front to rear would create attachment problems. I am having trouble convincing Customer Service this is an issue.
Bought these for my new log splitter they worked great just need pain now . Good product and really good service
I bought a boat trailer fender. I haven't mounted it yet but it looks good and was a very reasonable price. Great variety and Prompt shipping. I'm very satisfied.
I put two of these fenders on my canoe trailer. Both broke before I'd gone 1,000 miles.
This is a better finder than the original, which was on my inTech Trailer. It does not come pre-drilled or painted. I highly recommend this finder and command.
Had a blowout and it took a fender off. Replaced it with 2 round ones. Also replaced the taillights and a couple of clearance lights while I was working on it. Turned out great. Thanks
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jerry
5/9/2024
Its been over a year now and Im 100 happy with this product. Trust me, this size fender is hard to find via true stainless steel this product will never rust.