bing tracking image
  1. Trailer Brakes
  2. Kodiak
  3. Disc Brakes
  4. 10000 lbs Axle
  5. 12000 lbs Axle
  6. Standard Grade
Kodiak Disc Brake Kit - 11" Rotors - 8 on 6-1/2 - Gal-Dex/E-Coat - 10K-12K - 1 Axle
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Kodiak

Kodiak Disc Brake Kit - 11" Rotors - 8 on 6-1/2 - Gal-Dex/E-Coat - 10K-12K - 1 Axle

Part Number: KD598FR
$1,577.89
Trailer Brakes
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
When your equipment trailer needs brake work, replace the braking components on both ends of 1 axle while keeping your compatible hubs. This Kodiak disc brake kit has corrosion-resistant finishes and separate rotors that make future service easier. Great Prices for the best trailer brakes from Kodiak. Kodiak Disc Brake Kit - 11" Rotors - 8 on 6-1/2 - Gal-Dex/E-Coat - 10K-12K - 1 Axle part number KD598FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Photos

Kodiak Trailer Brakes - KD598FR

  • Disc Brakes
  • 10000 lbs Axle
  • 12000 lbs Axle
  • Standard Grade
  • Rotor
  • 5/8 Inch Studs
  • 8 on 6-1/2 Inch
  • 16 Inch Wheel
  • 17-1/2 Inch Wheel
  • Kodiak

When your equipment trailer needs brake work, replace the braking components on both ends of 1 axle while keeping your compatible hubs. This Kodiak disc brake kit has corrosion-resistant finishes and separate rotors that make future service easier.


Highlights

  • Keep Your Existing Hubs: Separate rotors let you replace worn brakes without replacing compatible hubs.
  • Covers Both Wheels on 1 Axle: Includes 2 rotors, 2 calipers, pads, brackets, spacers, and hardware.
  • Fits Heavy-Duty Trailer Wheels: Works with 16" dual or 17-1/2" single wheels on compatible 10K-12K axles.
  • Match Your Mounting Setup: Needs 7-bolt brake flanges, 5/8" studs, and an 8 on 6-1/2" bolt pattern.
  • Planning a Disc Brake Conversion: Supplies wheel-end parts; an actuator and brake lines are also needed.
  • Fight Rust From Road Spray: Gal-Dex rotors and E-coated calipers and brackets help resist corrosion.

Features to know about

Keep Your Good Hubs and Replace the Brakes

If your trailer hubs are still in good shape, why replace them just because the brakes are worn out? This Kodiak kit uses separate rotors, so you can keep your existing compatible hubs and replace the braking components instead. You get the rotors, calipers, pads, mounting brackets, spacers, and hardware for both ends of 1 axle. Down the road, you can also replace a worn rotor without replacing the entire hub assembly.

Converting Your Heavy Trailer to Disc Brakes?

If you're upgrading from drum brakes, this kit takes care of the braking components at the wheels. It works with compatible 10,000-lb to 12,000-lb axles, including certain 16" dual-wheel and 17-1/2" single-wheel setups. You'll need to verify your 7-bolt brake flanges, hub bolt pattern, and wheel studs before ordering. Converting from electric drums also requires an electric-over-hydraulic actuator rated for disc brakes, hydraulic brake lines, and a compatible brake controller.

Less Brake Maintenance Down the Road

Heavy trailers put plenty of demand on their brakes, especially when hauling equipment through hills and stop-and-go traffic. The self-adjusting calipers compensate for brake pad wear, so you don't have to make periodic manual adjustments. Gal-Dex-coated rotors and E-coated calipers and brackets help resist rust from rain and road spray, giving the braking components added corrosion protection.

Specs

Application and Fitment:

  • Axle capacity: 10,000 lbs to 12,000 lbs
  • Rotor diameter: 11" nominal
  • Compatible hub bolt pattern: 8 on 6-1/2"
  • Compatible wheel stud diameter: 5/8"
  • Brake mounting flange: 7-bolt
  • Wheel compatibility: 16" dual wheels or 17-1/2" single wheels
  • Hub lubrication compatibility: grease or oil

Construction and Finish:

  • Rotors: Gal-Dex coating
  • Calipers and mounting brackets: E-coat finish
  • Brake pad backing plates: E-coat finish
  • Hub spacers: uncoated

Included Components:

  • 2 rotors
  • 1 left-hand caliper and 1 right-hand caliper
  • Brake pads for both calipers
  • 2 caliper mounting brackets
  • 2 hub spacers
  • Mounting hardware

Note:

Requires compatible hubs, hydraulic brake lines, and a hydraulic actuator rated for disc brakes. Dexter recommends genuine Dexter or Kodiak hubs. Verify axle, hub, and wheel clearance compatibility before installation.



K71-2R-11-12D-HD-DEER Kodiak Disc Brake Kit - 11" Rotors - 8 on 6-1/2 - Gal-Dex/E-Coat - 10K-12K - 1 Axle

K71-2R-11-12D-HDDEER





Ratings & Reviews

No reviews

5 Stars
(0)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
0
0
true

See what our Experts say about this Kodiak Trailer Brakes

  • Kodiak Disc Brake Kit for 10K to 12K Trailer Axles With Existing Hubs
    Hey James! I recommend the Kodiak Disc Brake Kit # KD598FR for your equipment trailer. This kit is designed for 10,000 to 12,000 lb axles with an 8 on 6-1/2 bolt pattern, 5/8" wheel studs, and a 7-bolt brake flange. Since the hubs are sold separately, you can reuse your existing hubs if they're compatible and in good condition. Dexter recommends Dexter or Kodiak hubs, which you likely have unless they have been replaced with another brand. What kind of equipment are you hauling?
    view full answer...
  • Will Kodiak 11" Disc Brakes Fit My 12K Trailer Axles With Dual Wheels?
    Hey Mike, thanks for reaching out. Yes, the Kodiak Disc Brake Kit # KD598FR is designed for heavy-duty trailers with 10,000-lb to 12,000-lb axles, and the 11" rotor configuration is compatible with 16" dual wheels and 17-1/2" single wheels. The kit uses an 8 on 6-1/2" bolt pattern and is designed for hubs with 5/8" wheel studs and a 7-bolt brake mounting flange. Those are the important specifications to match when converting your trailer from drum brakes to hydraulic disc brakes. You will...
    view full answer...

Do you have a question about this Trailer Brake?


Info for this part was:

Employee Wilson B
Edited by:
Wilson B
Employee Kim H
Written by:
Kim H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924