bing tracking image
  1. Trailer Brakes
  2. DeeMaxx
  3. Disc Brakes
  4. 8000 lbs Axle
  5. Rotor
  6. 16 Inch Wheel
  7. 16-1/2 Inch Wheel
  8. 17 Inch Wheel
  9. 17-1/2 Inch Wheel
DeeMaxx Disc Brakes - 13" Rotor - 8 on 6-1/2 - Maxx Coat/Stainless - 5/8" Bolt - 8K Dexter
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
DeeMaxx

DeeMaxx Disc Brakes - 13" Rotor - 8 on 6-1/2 - Maxx Coat/Stainless - 5/8" Bolt - 8K Dexter

Part Number: DE97VR
In Stock
$765.09
Trailer Brakes
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Upgrade to disc brakes with these slip-on rotors and get safer, more consistent braking. Durable Maxx coating and stainless steel calipers make these brakes perfect for occasional use in saltwater or areas with a lot of snow, slush, and road salt. Great Prices for the best trailer brakes from DeeMaxx. DeeMaxx Disc Brakes - 13" Rotor - 8 on 6-1/2 - Maxx Coat/Stainless - 5/8" Bolt - 8K Dexter part number DE97VR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (0)
  • Videos (3)
  • Photos

DeeMaxx Trailer Brakes - DE97VR

Highlights

  • Stops Smoother and Shorter: Disc design delivers safer, more controlled braking than drums.
  • Fights Rust and Salt Damage: Maxx coat and stainless calipers resist corrosion for 1,000+ hours.
  • Runs Cooler for Longer Life: Vented, drain-through rotors shed heat and moisture to prevent fade.
  • Easy Swap-On Upgrade: Slip-on rotors fit standard idler hubs—no need to replace the full assembly.
  • Low-Maintenance Design: Minimal parts to service; laser-etched bleed steps guide upkeep anytime.
  • Built for Heavy Loads: Rated for 8,000-lb axles with 13" rotors and 8 on 6-1/2" bolt pattern.

Features to know about

Upgrade Worn or Outdated Brakes: 13" Slip-On Disc Kit for Smooth, Confident Stopping

If your old drum setup is losing bite or dragging, this DeeMaxx 13" disc brake kit brings a big improvement. The slip-on rotors fit over standard idler hubs and use your existing wheel bolts, so you don’t have to change the whole hub-and-rotor assembly. With ceramic pads and stainless steel pistons, the brakes respond fast and stop smoothly, giving your trailer more consistent, controlled braking.

Side-by-side comparison of an electric drum brake and a hydraulic disc brake, showing the difference between traditional and modern trailer brake systems.

Close-up of an installed DeeMaxx disc brake assembly showing rotor, caliper, and mounting bracket on a trailer axle.

Built to Last in Harsh Conditions: Maxx Coat and Stainless Steel Protection

Saltwater, snow, and road salt can destroy unprotected brakes in no time. This kit’s Maxx coating on the rotors and brackets holds up for more than 1,000 hours in salt spray testing—far beyond zinc or Dacromet coatings. The stainless steel calipers are rustproof, and drainage holes in the hat section help water escape before it can cause corrosion. It’s a setup made to handle coastal launches or long winters without rust taking over.

Keeps Cool Under Load: Vented Rotors Reduce Heat and Fade

Heavy towing or downhill runs can make brakes run hot. These vented rotors move air through the core to shed heat faster and prevent brake fade. The added drainage holes in the hat section give extra ventilation, helping extend pad life and keep braking performance steady mile after mile.

DIY-Friendly Install: Bolt-On Brackets with Built-In Guidance

This kit is easy to install without special tools. The rotors slip over your existing hubs, the brackets bolt right up, and laser-etched instructions on each caliper show how to bleed the lines correctly. You get everything needed to upgrade one axle—two rotors, calipers, and brackets—for a clean install that saves time on setup and future maintenance.

Close-up view of DeeMaxx caliper mounting bracket and caliper installed on trailer axle showing bolt and sleeve design.

Close-up of a DeeMaxx stainless steel disc brake caliper showing laser-etched brake bleeding instructions for easy maintenance.

Stainless steel DeeMaxx disc brake caliper with ceramic brake pads inserted, showing corrosion-resistant design and easy pad access.

Built for Heavy-Duty Use: 8,000-lb Axle Capacity with 7-Year Warranty

With an axle capacity of 8,000 lbs, a 13" rotor diameter, and an 8 on 6-1/2" bolt pattern with 5/8" wheel bolts, this kit is made for strength and reliability. It’s backed by a 7-year warranty and built from high-quality, automotive-grade components that deliver dependable braking performance season after season.

Specs

Weight and Capacity

  • Axle capacity: 8,000 lbs

Compatibility

  • Idler hub type: Dexter or DeeMaxx
  • Idler hub #: 008-399-05 to 08
  • Wheel size: 16" and larger
  • Bolt pattern: 8 on 6-1/2"
  • Wheel bolt diameter: 5/8"
  • Brake flange configuration: 4 bolt

Dimensions

  • Rotor diameter: 13"

Warranty

  • Warranty period: 7-Year warranty

DBSO-8KDD-MAXX-SS Dee Maxx Disc Brakes - 2 Wheel Set - Rotor Only - Maxx Coating - Stainless Steel Calipers - 5/8" Wheel Bolts - 8,000 lbs - Dexter Axle





Video of DeeMaxx Disc Brakes - 13" Rotor - 8 on 6-1/2 - Maxx Coat/Stainless - 5/8" Bolt - 8K Dexter
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for DeeMaxx Disc Brakes | Expert Insights from the Manufacturer

Hello, neighbors, it's Brad here from etrailer. And today I'm at NATM. And this convention brings a lot of the vendors that we have at etrailer to a convention where we have their booths and their products set up. I had a chance to catch up with quite a few of them. So, let's take a look at their products a little bit up close and ask some of the questions to those vendors about their products. I'm here with Brandon from DeeMaxx and DeeMaxx offers a whole line of brake products, and we're gonna break these down.

Yeah. So, what is DeeMaxx as a company DeeMaxx, we are a light to medium-duty trailer disc brake manufacturer. We kind of have the whole assembly of the process now from the brake lines and fittings up to our actual brake parts themselves. Like, you see this rotor hub here, and the calipers all the way down to the actuators as well. So, here we have a disc brake assembly, caliper and rotor.

Let's break this down. What makes you guys stand out, you know, not only from a drum brake, but from a disc brake standpoint Yeah, absolutely. So, only thing we don't have on the table here that we do have on our backdrop and elsewhere in the booth, we've got the mounting brackets as well. So, we've got our slip-over rotor here. One of the big things that we, you know, that we we inchesre able to do at the start when DeeMaxx was created was Chuck wanted to put an emphasis on advantages over other disc brake manufacturers, not just having advantages over the drum brakes.

And one of the ways we did that in our rotor design is the holes in the hat. It's gonna promote the, like I said earlier, the better dissipation of heat, better draining and then more even plating on a coating. So, you've got a rotor that doesn't have the holes in the hat and you go to do the coating on it, you're gonna get that pocket of air in there, and you've got that pocket of air, you're gonna have to go back and redid that area or recoat that area. And it's not gonna be an easy coat. As far as calipers, you know, we carry everything for our brakes from 3.5K up to 16K axles.

The 7K and up, we're gonna have Kevlar pads in. That's kind of a new thing for us. From the end of 2023 beginning 2024 is the Kevlar pads. We really wanted to see our pads be able to grip a little bit more. For certain applications where the Kevlar may not be best, maybe going more with the stainless if you're in a marine industry. But the over-the-road guys, those utility guys, even the RVers that don't frequent the salt water communities, those guys, that the Kevlar pouch are just perfect for it. But best part about DeeMaxx is our seven-year warranty. We're not gonna discriminate based on the coating or type of product you've got. Whether you've got the Maxx, the stainless, everything's covered for seven years. So, we stand by our product in that, you know, the coating or the material shouldn't really waiver in the company's support for your product. Absolutely. And I've been able to install these on trailers and do the whole conversion. And I did my own break test, it's night and day. I think the guy that was towing it too, he was blown away. I mean, turning the game down by nearly 80% and getting this way better breaking even at that, it was really an eye-opener to me. Brandon Yeah. And you know, drum brakes, like you said, it's kind of an old technology and I love old hot rods, but if you have standard brakes on those, they're terrible for stopping. So, why would you do the same to your trailer We've come long way in technology. Yeah. Might as well keep yourself safe. Now, going back to pads, you mentioned Kevlar, is that gonna be for more long, like, longer lifespan, better bite What does Kevlar offer over a traditional pad So, the origination behind us going after wanting something that's gonna have that more bite to it, more resilience behind the material. We are very supportive of our military. We work hand in hand with every branch of the U.S. military all the way up to the guys out in outer space. And those guys we inchesre the ones that really came to us and said, "Hey, man, we're gonna need something that's gonna be beefier, it's gonna be able to stop, it's gonna meet these certain tests that the military has to meet, but these end users can't." And it's like, "Hey, you know, we've developed this Kevlar brake pad product and it's the U.S. military is using it." If it's good enough for them, I promise you it's good enough for the end user like you and me. Yeah. You know, it's interesting too as far as maintenance goes because many people with drum brakes, if you ask them, "Hey, are years in good condition" They're gonna go, "I don't know." Because most people aren't taking that off to take a look. And that's something with disc brakes, you can look at the pad and see where- Brandon Yup. You're at, and if you do need to change it. Yeah, you can. A lot of the drum brake guys as some of 'em say they've got the self adjusting ones. And it's like, if you're not getting in there and looking, are you willing to bet your family's safety, your work You know, these hot shot guys, are you willing to bet that that it's actually adjusting Probably not. So, you're gonna want to go in there and look at it yourself, check the adjustments. And that's when it goes down to the more and more maintenance on the drum break user versus the disc brake guy. They can take a peek in there, take a feel in there and be like, "All right, it's time to replace my pads." Now, if someone did wanna make the switch to disc brakes on their trailer camp or whatever it may be, what else would they need to get in order for that system to work We don't sell any, you know, full kits. We sell the actuators by itself. We sell the brake line kit by itself and our retail brake kit. You, guys, do a full thing, where y'all actually bundle those together and sell them as a complete system. So, if you knew what break kits you needed, what break line kits you needed, and say you know what actuator you needed, y'all have a kit for that, more than likely. Y'all have several kits of bundles, those all pieced together, which is super awesome for the neighbors. Oh, a huge thing to Brandon from DeeMaxx, taking the time to- Yeah. You know, really explain why disc brakes might be a great option. And I mean, these are this high-performance standard. These are awesome. So, thank you for your time. Yeah, absolutely, for your time. And appreciate you being here. Thank you guys for all your support. Thank you. Awesome.

Ratings & Reviews

4.2

11 reviews
Review sort icon
Upgrade to disc brakes with these slip-on rotors and get safer, more consistent braking. Durable Maxx coating and stainless steel calipers make these brakes perfect for occasional use in saltwater or areas with a lot of snow, slush, and road salt.

by:



by:



by:



by:



by:



by:

Excellent



by:

Haven't installed yet but it came in packaged nicely and product looks great



by:

Fast shipping. Will be putting on in the next few days.
Thanks
Barry



by:

So far, so good. The only downside is that new bolts are not supplied for mounting brackets. Box looked like it fell off a shelf a few times, but the components don't appear to be damaged at this time.



by:

Great service had just what I need very knowledgeable.



by:

I ordered two brake sets for my dual axle trailer and was sent the wrong roters in one box. Additionally they were just thrown in a box, not packed or secured and thus arrived damaged. I am planning a road trip that likely cannot happen now, replacement parts were to be shipped out today after calling customer service twice but I’ve got no confirmation that happened. The product seems fine the problem is the company selling it.


11
11

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Dustin K
Video Edited:
Dustin K
Employee John S
Video Edited:
John S
Employee Wilson B
Updated by:
Wilson B
Employee Andy C
Installed by:
Andy C
Employee Ryan F
Written by:
Ryan F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924