How To Determine Fit of the CE Smith Bunkboard Guide-On Kit CE27600K75

Question

Question:

looking at this kit for use on a 5 star roller trailer with a trophy 2352 on it would they work?

asked by: Shaun H

0

Expert Reply:

I don't have any specifics on your boat or trailer but the main thing you need to check before using the CE Smith Bunkboard Guide-On Kit part # CE27600K75 is your frame size. This kit works with trailer frames 3" wide and up to 4-1/2" tall. However, it can also accommodate trailer frames 3" wide and up 6" tall if you use the CE Smith Extra-Long U-Bolt Kit part # CE11416.

If your trailer frame is not 3" wide or taller than 6" tall then you would need to combine part # CE27609PG (4), part # CE10200G (4), part # CE11330 (2), then make your own frame brackets.

expert reply by: Conner L

0

Roy W.

7/21/2020

I have a trailer frame that is 6 inches tall exactly. Trying to mount trailer guided to trailer. I need solution or u bolts taller than 6 inches

Chris R.

7/27/2020

We don't have hardware/U-bolts available that are tall enough to work with 6" frames, although I imagine you can obtain something easy enough at a local hardware store.

Answer 1

Hey Kerry, you'd be fine to have a small gap between the sets of the Tie Down Marine Slides for Boat Trailer Bunks #TD99FR that you referenced like you asked about. You probably don't have to go all the way forward on your 9.5 foot long bunks…

view full answer...

Answer 2

The CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair #CE10211G have holes that are 2-1/4 inches on center and 1-1/4 inches on center in the other direction. I've attached a photo to assist as well as a…

view full answer...

Answer 3

This Submersible LED Trailer Light Kit with 25 foot Wiring Harness, part #TLL9RK, uses all stainless steel mounting hardware. The mounting hardware of this trailer light kit should work well in the saltwater conditions that you use your boat in.

view full answer...

Answer 4

The wood used for the bunk boards on the #CE27660 CE Smith Bunk-Style Guide-Ons for Boat Trailers is not pressure treated. CE Smith uses untreated southern yellow pine for their bunk boards. These also feature marine-grade carpeting to protect your…

view full answer...

Answer 5

I went out to the warehouse to measure the horizontal part of CE Smith Bunk-Style Guide-Ons #CE27660. The length is 12 inches so if 2 inches of frame are covering up part of that then that leaves 10 inches that will stick in towards the center of the…

view full answer...

Answer 6

The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…

view full answer...

Answer 7

Hello Chad, thanks for reaching out. The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 will work fine with a StarCraft tri-toon, assuming you’ve got a pretty standard bunk-style trailer under it. We’ve put those on plenty of…

view full answer...

Answer 8

Hi Jim! The Wesbar Wrap Around Lenses were discontinued quite a while ago, so unfortunately, we do not have any left in stock. I did a lot of searching around the web, but I was unable to find anywhere that still carries them. You may be able to find…

view full answer...

Answer 9

I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.

view full answer...

Answer 10

Aluminum trailer frames or bodies can cause grounding issues so I suggest using a separate ground wire that runs from the rear of the trailer up to the main ground post in the junction box like #38656. You can join the ground wires for the individual…

view full answer...

Answer 11

I was able to track down some measurements for the 90 degree uprights that are included with the #CE27600K90 bunk kit. Hope this helps. See below: A: Internal Distance - 15-1/2" A: External Distance - 17" B: Internal Distance - 18" B:…

view full answer...

Answer 12

Hey David, from what I can find in the instructions, the longer straps on the Rampage California Brief for Suzuki #RA90115 would actually just need to be wrapped around the roll bar. Let me know if there is anything else I can do for you!

view full answer...

How To Determine Fit of the CE Smith Bunkboard Guide-On Kit CE27600K75

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching