See what our Experts say about this CE Smith Boat Trailer Parts

• Replacement U-Bolts for Bunks on Escort Bunk Trailer
  We have bunk U-bolts like the CE Smith part # CE15283GA which measure 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter which is a very common size that would most likely be what you'd need. I'd recommend checking out the size you have now and comparing them to these. If you need something different let me know.
  view full answer...
• Replacement Trailer Bunk Brackets for a Escort Boat Trailer
  The CE Smith Bolster and Swivel Bracket Assembly # CE10000G that you referenced would work well to replace the bunk brackets on your boat trailer. You would be able to set the angle for the bunks that you would like with the # CE10000G also. I attached a picture that shows that you can use different angles.
  view full answer...
  
• Replacement Bunk Brackets for Escort Boat Trailer
  The CE Smith Bolster and Swivel Bracket Assembly part # CE10000G are universal so they can be used in place of pretty much any bunk bracket. If you have angled bunk brackets these would not be an issue because the above bunk brackets can swivel. If you can give me the dimensions of your frame I can then get you the correct u-bolts to use the above bunk brackets. That said, I would not be able to locate specific bunk brackets so universal options like the above are your best bet.
  view full answer...
• Dimensions of the CE Smith U-Bolts and Having Enough Threads
  Hey Jarrod. There's 3-13/16" of usable space and threads inside the CE Smith U-Bolts item # CE15283GA-8. If your rails are only 2" wide you're going to have plenty of threads left after installing the CE Smith Bolster and Swivel Bracket Assembly item # CE10000G. The threaded portion of the u-bolt is 1-1/2" long. What kind of trailer do you have?
  view full answer...
• Will CE Smith Swivel Bunk Brackets Replace Rusted Ones on Calkins Tandem Trailer
  The CE Smith Bolster and Swivel Bracket part # CE10000G that you referenced certainly could replace the rusted out brackets on your trailer. This product is designed for doing what you are looking for so it would work well. I attached a review video for this product for you to check out as well.
  view full answer...
• Replacement Bunk Brackets and Fenders for Escort WT20PDB-X
  From what I have found, the parts on the sheet you are talking about are no longer around. We do have some available options but they will not be identical to what you currently have. For bunk brackets for your Escort boat trailer, I recommend the CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel # CE10000G. According to the parts sheet, you have 15" wheels so you would need fenders to accommodate that size. The best option we have with steps is the Single Axle Trailer Fenders...
  view full answer...
  
• Bunk Board Supports and Replacement Bunk Boards for a Escort Boat Trailer
  Thanks for the pictures! Yes, the CE Smith Bolster and Swivel Bracket Assembly item # CE10000G would offer your bunk boards support and be a great upgrade to your Escort boat trailer. You can replace your current bunk boards with the 6 foot long CE Smith Carpeted Bunk Boards for Boat Trailers item # CE27840. Another option is to remove your current bunk boards and keep your galvanized steel supports and rails and just attach new bunk boards.
  view full answer...
  
• Recommended Replacement Bunk Brackets for a Escort Boat Trailer
  The 9" CE Smith Bolster and Swivel Bracket Assembly item # CE10000G you were looking at, are our go to for replacement bunk brackets. We have had quite a few customers over the years use these on Escort boat trailers. These are sold individually or in four packs item # CE10000G-4. The swiveling brackets will allow you to mount your bunks at any angle. We also offer 11" tall brackets item # CE10001G for a single or item # CE10001G-4 for a four pack. If you don't have holes to mount...
  view full answer...
• Weight Capacity And Parts Needed For Modifying Boat Trailer For 26 Ft Regal Commodore
  I spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, part # CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of the boat. There should be a bracket attached to each cross member of the trailer frame. If you are buying several brackets, I would recommend part # CE10000G-4. This is a set of 4 of the 9 inch adjustable brackets. If you need longer adjustable brackets...
  view full answer...
• How Many Bolster And Swivel Brackets Are Needed For A Boat Trailer
  I spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, like part # CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of the boat. There should be a bracket attached to each cross member of the trailer frame. If you are buying several brackets, I would recommend part # CE10000G-4. This is a set of 4 of the 9 inch adjustable brackets. If you need longer adjustable...
  view full answer...
• Bunk Brackets That Attach to the Trailer Frame Instead of Cross Members
  I do have an option for you but we do not carry the style bracket pictured in the photo. The CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel part # CE10000G can be attached to the frame with U-bolts instead of the cross members and their swivel features allows you to tilt the bunk board.
  view full answer...
  
• Recommended Replacement Bunk Brackets for Escort Bunk Trailer
  I have a solution for you, but we don't have any of the bunk brackets that are exactly the same as the ones you're replacing. Instead, you can use the CE Smith # CE10000G you were looking at to replace the bunk brackets on your current trailer. These are swiveling brackets, so the angle of the bunk boards will be able to be adjusted to match your current setup. In order to mount these bunk brackets you'll want to use U-Bolts like the CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16"...
  view full answer...
  
• CE Smith Bolster and Swivel Bracket Assembly that Fits 1988 Landau Trailer
  Yes, based on the picture you sent in the CE Smith Bolster and Swivel Bracket Assembly # CE10000G that you referenced will fit and work well on your 1988 Landau Trailer.
  view full answer...
  
• Boat Trailer Wobble Rollers for 1 Inch Diameter Shaft
  Judging by the diameter of the shaft the roller fits on, I'm assuming you're needing a wobble roller. We offer two different wobble rollers that will fit a 1 inch shaft, part # YR530R-8P which is black rubber, and is 5 inches in diameter and # YR500YW-8P which is TPR (thermo plasticized rubber) and is also 5 inches in diameter. You'll also need the retaining clip, part # CE10981. We sell the rollers individually, not in packs with multiple pieces. You can see product demonstration videos...
  view full answer...
• What Diameter U-Bolts Will Work With CE Smith Bolster and Swivel Bracket Assembly
  I attached a photo of the CE Smith Bolster and Swivel Bracket, part # CE10000G you can check out. As noted on the photo, the slotted holes on the bolster are 2-3/4 inches long and 1/2 inch wide. There is a distance of 1/2 inch between the slotted holes. U-bolts like part # CE15283GA are recommended for the bracket. These U-bolts measure 3-13/16 inches long, 301/16 inches between the u-bolt legs and are 1/2 inch diameter.
  view full answer...
  
• Replacement Bunk Brackets Solution for 1995 ESCO Trailer
  We do not have any bunk brackets that attach to frame channels that run front to back. We only have options that run from left to right. Best solution we have would be to attach your bunks to the left to right crossmembers using our bolster brackets like the part # CE10000G that you referenced. If that is not possible for some reason send me a picture of your trailer frame and I'll see what we can come up with as best solution.
  view full answer...
  
• Will the CE Smith Bolster and Swivel Bracket Assembly Work if Attached to Boat Trailer Frame
  The # CE10000G CE Smith Bolster and Swivel Bracket Assembly is designed to mount on the boat trailer's crossmembers. You are correct in thinking that mounting this to the boat trailer frame would not provide swivel adjustment as intended since the swivel would rotate in the wrong direction. The exception to this is with kayak trailer frames. The brackets are mounted to the trailer's frame on a kayak trailer to support bunk boards that run across the trailer. I have attached a review...
  view full answer...
  
• Is There a Weight Capacity for the CE Smith Bolster and Swivel Bracket # CE10000G
  I spoke to my contact at CE Smith and he informed me that they do not specify a weight rating for the CE Smith Bolster and Swivel Bracket # CE10000G because it does not bear the weight of the boat. It is actually the U-bolt that attaches this product to the cross member of your trailer that supports the weight. He said that as long as you use a # CE10000G on every cross member you should have no problem carrying the weight of your boat.
  view full answer...
• Replacement Pontoon Boat Brackets for Boat Trailer or Boat Lift
  The CE Smith Bolster and Swivel Bracket Assembly - Galvanized Steel - 9" - Qty 1 # CE10000G is designed to hold a boat on a trailer, so it isn't very different to have them on a boat lift. These will work well for the tritoon you referenced. You just use a bunk board at an angle on each sided of the individual pontoons. You will have 6 bunk boards and I've linked the page to the options for you. If you don't need a certain height, then the CE Smith V-Wing Bolster Bracket for Pontoon...
  view full answer...
• Converting Wood Bunks of Trailer to Roller Bunks
  Replacing your wood bunks with roller bunks can be as easy as just bolting the roller brackets to the wood bunks like with the Dutton Lainson kit part # DL21741 or you can remove the brackets and bunks you have now so that you can install the brackets like the part # CE10000G that you referenced and then install the rollers.
  view full answer...
• Swivel Bracket Availability for Roller Bunks to Allow Matching of Roller Bunk Angle to Hull Angle
  The swivel bracket part # CE10000G is exactly what you are looking for. The top of the bracket can swivel to either side to allow the roller bunks to be angled to match your hull. For a 5 foot long roller bunk we have the part # DL21741 which would be a great option.
  view full answer...
• Availability of Bolster Bracket for Attach Wood Bunk Kit
  Based on what you described it sounds like you are looking for a swivel bolster bracket for your wood bunks like the part # CE10000G which is sold individually.
  view full answer...
• Does the CE Smith Swivel Bracket Come with a Bolster Bracket
  The swivel bracket # CE10200G is just the L-shaped bracket. it can attach to a bolster bracket. To get the bolster bracket with the swivel already on it you can use one of the following: # CE10000G, 9 inches tall # CE10001G, 11 inches tall # CE10002G, 13 inches tall There are also sets of 4: # CE10000G-4 # CE10001G-4 # CE10002G-4 I have also included a link to the bolster brackets we carry with and without swivel brackets attached.
  view full answer...
• Three Inch Long U-Bolts to Use with CE Smith Bolster and Swivel Bracket Assembly for Boat Trailers
  CE Smith u-bolt # CE15254A is 3 inches long by 4-1/8 inches wide with 7/16 inch diameter. It also includes matching washers and nuts. This u-bolt is sold in quantities of 1. We also have CE Smith u-bolt # CE15252A. It is also 3 inches long but more narrow at 3-1/8 inches wide, and also has a 7/16 inch diameter. It does include washers and nuts and is sold in quantities of 1. These u-bolts are zinc-plated for corrosion resistance.
  view full answer...

Do you have a question about this Boat Trailer Part?