These square-link, diamond-pattern tire chains provide excellent traction in snow and ice for vehicles with limited wheel well clearance. Made of a durable and corrosion-resistant manganese nickel alloy with built-in tensioners to ease installation.
Features:
Specs:
Installation
1. Spread the chain around the back of the tire.
2. Connect the yellow and blue cable at the back of the tire.
3. Push the cable into place behind the tire and center the cross chains on the tire's tread. Then, on the front side of the tire, join the 2 ends of the yellow side chain using the green hook.
4. Feed the silver draw chain with the rubber tensioner through the red channel at the bottom and pull it tight. Then run the tensioner through the red rings. (Note: Depending on your tire size, you might not be able to thread through both rings.) Pull the tensioner across the tire and fasten it to the yellow chain on the opposite side.
5. Pull your vehicle forward and retighten the chain.
Class "S" Designation
SAE Class "S" tire chains are designed for use on vehicles with restricted wheel well clearance. Certain newer cars, vans and small trucks, especially those with large, aftermarket tires, may require Class "S" chains.
These chains will fit your tires provided there is both:
How to Choose Snow Chains for Your Vehicle
To choose the right snow chain, you must match your tire size. Those measurements can be found on the side of your tire, as shown below.
185/60-15
These chains fit the following tire sizes:
California residents: click here
Do you have a question about this Tire Chain?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.