
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
A loaded trailer or packed truck bed can cause the rear end to sag, throwing off steering and braking. The Timbren Suspension Enhancement System adds 11,000 lbs of rear axle support to keep your ride level and steady. It helps eliminate squat when towing or hauling heavy gear, giving you better handling and a safer, more controlled drive on the highway or at the job site.


Bumpy roads and uneven terrain can make towing or hauling feel harsh. These hollow rubber springs cushion your suspension by absorbing road shock and vibrations. The result is a smoother, more stable ride that protects your truck’s suspension components from extra wear while keeping you comfortable behind the wheel.

When a curve or off-balance load pushes your truck around, each Timbren spring works independently to keep things stable. This independent action reduces body roll and sway so your vehicle feels planted in corners, crosswinds, or when carrying uneven loads.


Unlike air systems that require compressors and pressure checks, these rubber springs need no upkeep once installed. Just bolt them in and they do their job automatically—no air lines, no adjustments, no leaks to chase down. You get consistent support every time you tow or haul without any extra maintenance.

Designed for heavy-duty use, this system delivers lasting suspension reinforcement for constant towing or hauling. The rugged rubber construction stands up to repeated compression without losing support. Backed by a lifetime warranty, it’s a setup built to work hard for the long haul.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steve here with etrailer.com. Today we're looking at our Timbren suspension enhancement system for your rear axles. Now folks, these are a custom fit application for your vehicle, so make sure you're checking our fit guide here at etrailer.com to be sure you're getting the right parts the first time. Now, I just have these kind of loosely stacked together, the way they would be more or less on the vehicle. But again, verify that with the instructions before you install everything. These mount to your existing attachment points on the vehicle.
They have an impressive 11,000 pounds capacity, and that means they're gonna give you a nice, robust rear access support. And they're also gonna minimize sag while you're towing those loads. So not only is it gonna improve the towing stability by keeping your vehicle level, it's gonna minimize that sway when you're hauling different trailers of different weights. And you can carry substantial loads, because again, it's gonna reduce sag, but it's also gonna enhance the braking and steering while you're towing and everything. So it's just gonna give you an overall safer and more pleasant ride as you're going down the road.
So not only will it cushion those light loads, but it's also gonna stiffen those heavy loads as well. So as you can see, there's a couple different components on these. And like I said, I've just kind of got everything stacked together. Again, check the instructions. Depending on your year, make, and model, you may or may not potentially use all of these, and you may use all of these.
So again, just check the instructions before you install it. Make sure you know what you're getting into. Now, this does function without the need of airbags or pressure adjustments. So that's a lot of reasons some people choose these over airbags. You don't have to get outta your vehicle and make adjustments every time you load or unload.
That being said, if you are having an empty ride, you may feel some of them bumps in the road just a little more than normal, but not too bad. But mainly if you're gonna have something in the back of that vehicle, most of the time this is a great, great device to take care of all those bumps and all the extra swaying and swerving and that kind of stuff. So check 'em out. This is the Timbren suspension enhancement system for the rear axle. I'm Steven, thanks for watching.
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
Ratings & Reviews

Mike L.
9/3/2026
Please let us know if anything's missing, I'll get you fixed up!

Jay S.
8/14/2026
Now that its been a year Im very impressed with them. Theres no ride detriment without the 5th wheel attached and they do a great job of mitigating squat

Kate F.
5/6/2026
Glad to hear the Timbren systems worked out so well for your RAM Van Mitchell! It’s great that you noticed the smoother, more progressive response compared to the factory bump stops, especially under load. Thanks for sharing your experience with both the front and rear installs, that’s really helpful for others considering the upgrade. What kind of loads are you usually hauling with your van?

Brooke M.
5/7/2025
Wow, thank you for sticking with us, Don! That is awesome. I think you made an excellent choice here. Timbrens are tough and the heavy duty are SUPER tough. Glad to hear these were a good fit. Love the photos! Is that your own property?

Don
5/21/2026
The TIMBRENs work as stated during when I am pulling anything heavy. However, when the truck is not pulling anything, anyone riding in the rear seat gets a very hard jarring jolt when driving over any roadway repairs, bumps, expansion joints on bridges. I wished that I would have went with the Super Springs, or the Road Active Suspension. I may replace the TIMBRENS later.


Lazer S.
6/16/2026
They definitely look like they are helping, Orlando! How are they when you aren't towing? We hear a lot of people say they can be pretty harsh when unloaded.

Robin H.
9/22/2026
Thanks for taking the time to share such a detailed review and all of the pictures! The unloaded ride is a concern we hear fairly often with SES upgrades, so your experience with the 1" gap and rough-road testing will be really helpful to others considering these for their F-250. We appreciate the kind words about Naomi and our team as well. Looking forward to your update once you get some miles on them with the Rockwood!

Heather A.
4/24/2026
Hi there, thanks for reaching out, that’s actually a common issue with this type of trim. The one you tried is a standard flat insert, but some RVs (like your NOBO) use a slightly domed trim to help it sit over the screw heads in the track. If the screws stick up even a little, a flat trim won’t fully snap in place, which sounds like what you’re running into. The best way to find the right replacement is to remove a small piece of your original trim, lay it flat, and measure the full width from edge to edge. Most are either 3/4" or 1", but the shape matters too, not just the width. If yours has that domed profile, you’ll want something similar or a softer vinyl that can flex over the screws. If you’re able to send a quick photo of your track or old trim, I’d be happy to help you find a better match.

Mike L.
4/23/2026
Niiiice, I see what you did there!! That looks like a sweet setup!


Mike L.
4/2/2026
Glad to hear they worked well for you Jerrod. Hope you had a good trip!

Mike L.
2/26/2026
Thank you Darrell, we're glad to hear your Timbrens are still on the job!

Kate F.
4/23/2026
Thanks for sharing your experience Thomas. It is great to hear the Timbrens made a noticeable difference in ride quality and reduced body roll on your E350 Class C. We also appreciate the heads-up on the install. That kind of real-world feedback about brake line clearance is very helpful for others working on a similar setup. Would be nice if they had a stronger option, if you need the 5K, might need to go to airbags, but who wants to deal with having to air up if you don't need to. Where are you off to on the next adventure?

Kate F.
5/6/2026
Glad we had the right suspension upgrade to help with the squat Dennis! How is the ride when you are unloaded?

Christopher H.
8/14/2026
Love hearing this! Really appreciate the detailed feedback and photos. That extra stability when you're loaded up can make a huge difference. And installing them at 11 at night—that's commitment. Hope they treat you just as well on those mountain roads. Safe travels and we'll definitely make sure Dee Dee gets the shoutout.


Heather A.
2/21/2025
Timbrens are the best for sag because they are made of dense rubber. 6500 lbs sounds like one heck of a travel trailer, what is it? Any fun plans this summer?


Jerome
3/2/2026
Awesome product. Would recommend.

Lazer S.
8/19/2026
Glad to hear they are working well for you, Ryan! Now that they are on, where you headed?

Christopher H.
9/3/2026
Happy to hear the Timbrens are making that big of a difference Tony. Thanks for including the photo and we appreciate the kind words! Have you taken any longer trips with the Timbrens installed?


Jesse M.
9/10/2026
Awesome! Glad to hear the Timbrens made such a big difference in the ride quality. Thanks for sharing! Happy travels!

Mike L.
4/2/2026
Thanks for the photo, Sid. Quite a bit of difference there!!

Mike L.
4/29/2026
Thanks for the excellent photos, Steven!

Nick S.
12/15/2025
I am glad to hear they helped with both the sway as well as the rear sag with the camper! Not adjustable like airbags but they do the trick. What kind of camper do you have?

Kate F.
7/13/2026
Bud, thank you so much for taking the time to leave a review! I'm glad to hear the suspension upgrade helped reduce the sagging and porpoising while towing. I also really appreciate you including the installation pictures and sharing your tip about removing the rear wheels. I'm sure that will help the next person tackling the install. Thanks again for choosing etrailer!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Gwendolyn Y.
2/5/2026
You're right about the Sumos. They are softer so their progression is smoother than the Timbrens. When the Timbrens are first activated it may feel a little rough but give them a few minutes to warm up and be more pliable. You mentioned the bolts not being long enough, which bolts were giving you a hard time?