This 6" vacuum cup lets you mount or hang a variety of objects to non-porous surfaces with no tools required. A pump-action vacuum creates 210 pounds of pull strength without drilling holes or damaging the surface it's attached to.
Features:
Specs:
This 6" vacuum cup lets you mount a variety of objects to most horizontal or vertical, non-porous surfaces without drilling any holes. It uses a pump-action vacuum to create 210 pounds of pull strength without damaging the surface it's attached to. All metal parts are constructed with durable, high-grade stainless steel.
It has 2 slotted holes in the top that allow you to bolt nearly anything to the back of the cup. It also has a threaded 1/4 - 20 stainless steel insert in the center for attaching other SeaSucker products.
This vacuum cup holder is quick and easy to mount. To install the vacuum cup make sure the mounting surface is clean and place the cup on your vehicle or wall then press the pump several times until the orange band disappears. To break the seal and remove the holder simply pull the T-shaped tab up and towards the center of the cup. As suction decreases over time the plunger will extend from the cup. When the orange indicator band shows simply re-pump the plunger.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a look at the SeaSucker vacuum mount. Now, this six inch black vacuum cup is gonna let you mount a variety of objects to most horizontal or vertical non-porous surfaces without drilling any holes. It uses a pump action vacuum to create 210 pounds of pull strength without damaging the surface that it's attached to. As you probably already have noticed, it does have two slotted holes in the top. It's gonna allow you to bolt nearly anything to the back of this cup.
These holes are nine sixteenths of an inch long and they're a quarter of an inch wide, and they are separated on center by one and five 16th inches. This also has a threaded 14 by 20 stainless steel insert in the center for attaching other SeaSucker products. So as I mentioned, this is a six inch wide cup and then the overall height, we're sitting right at about two and a quarter inches tall. So this vacuum cup is gonna be very quick and easy to mount. And to install this, it's gonna be very simple.
You just wanna make sure that the mounting surface, which I have a hard surface here. You do wanna make sure that the surface is clean and then you are going to place this cup on the mounting surface and you can play, it could be on your car, it could be on a wall. You just wanna make sure that that wall is non-porous. And then you're going to press this pump several times until that orange band disappears. So as you can see, the cup is becoming more flat and then our orange band now is completely gone.
So that means that we have a nice seal on that. So taking a wide view here, as you can see, it's gonna hold very firmly. And again, this has 210 pounds of pull strength. And then when this orange indicator, if that should ever begin to show up, especially if you've had this sealed for some time, if you begin to see that orange seal, you'll just re-pump it a few times, depress that plunger a few times, and then that will re-energize, if you will, that seal, renew that seal. Then to break the seal, when you're ready to remove this, you're simply going to pull these tabs up just like that.
And as you can see, it breaks that seal and you'll be able to remove it. So again, lemme just show you, give that some, pump it a few times there or several times rather. And then we are nice and secure. And then just push in those tabs and it comes undone. Just that simple. Now as you saw, this does have a protective cap. So when you receive this, don't throw this cap away, you wanna keep that on hand for when you are not using this vacuum cup. You just replace that vacuum cap, protective cap rather. And then that's going to prevent the cup, the vacuum cup from hardening or cracking when it's not in use. This is made here in the USA of a hard plastic construction. So it's lightweight, it weighs about a pound or so, but it's gonna be very durable. It's gonna do a great job of holding up to the elements. And I do recommend checking out SeaSucker's waterproof lubricant, that is sold separately. That's gonna help prevent this plunger from sticking. And so you can find that lubricant on our website using the item number that you see there on your screen. Just take that item number, put in the search field of our website, that will take you to that lubricant, and then you can add that to your order if you so desire. But that's good to have on hand just to maintain your vacuum cup and make sure that it's operating as it should. Well, that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
This 6" vacuum cup lets you mount or hang a variety of objects to non-porous surfaces with no tools required. A pump-action vacuum creates 210 pounds of pull strength without drilling holes or damaging the surface it's attached to.I have used this vacuum mount for about a year and it has performed flawlessly. I actually modified it a bit to hold my television on the side of our 5th wheel. I didn't want to drill holes in the side of our new RV to hang the tv, so I used this mount. It works great. the pictures below illustrate my mods.
Made in USA, extra fast shipping from etrailer. Made a removable rack for a truck cap, worked as advertised. Impressive holding strength, but I did back up with a strap through the caps windoors for redundancy.
These things are really strong and they stick well. Just as a test I put on on the side of my camper and left it for a couple of days and it was still solid.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.