Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1996 Mazda Millenia
We'll connect you with nearby partnered installers who know this exact setup.
Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle
Part Number: AL88211
In Stock
$621.99
Retail:$857.99
You Save: $236.00
1996 Mazda Millenia
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (1540)
- Q & A (0)
- Photos
Air Lift Vehicle Suspension - AL88211
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- 5,000-lb Load Support: Levels your truck to cut rear sag and keep steering and braking steady.
- Smoother Ride Under Load: Internal jounce springs absorb bumps to reduce sway and bottoming out.
- Adjustable 5–100 psi: Fine-tune air pressure for towing or daily driving comfort and control.
- Keeps Loads Balanced: Inflate each side separately to level uneven cargo or off-center trailers.
- Zero Maintenance Jounces: Urethane bumpers act as a fail-safe if air pressure drops, preventing damage.
Features to know about
Stay Level and Confident Under Heavy Loads: Up to 5,000 lbs of Load-Leveling Support
A heavy trailer or full bed can make your truck squat and throw off braking and steering. The Air Lift LoadLifter 5000 Ultimate air springs add up to 5,000 lbs of load-leveling capacity to keep your ride level and stable. Whether you’re towing a camper or hauling equipment, the adjustable air bags distribute weight across all four wheels for better control and even tire wear. You’ll keep your headlights aimed properly, your handling steady, and your confidence high even with serious weight on the hitch.
Smooth Out the Ride: Built-In Urethane Jounce Springs
Rough roads and uneven loads can make any trip uncomfortable. Inside each air spring is a closed-cell urethane jounce spring that helps absorb bumps and shock at lower air pressures. These jounces engage progressively—the more you load them, the stiffer they get—so you get a smoother, less jerky ride when towing or hauling. If air pressure drops, they even act as a temporary fail-safe to protect your suspension until you can reinflate the bags.
Dial In Your Ride Height Anytime: Adjustable 5 psi to 100 psi
Every load is different, so being able to fine-tune your setup matters. With manual inflation valves and included air lines, you can adjust each bag independently between 5 psi and 100 psi for side-to-side or front-to-back leveling. Add more air for heavy loads or drop it down when empty for a softer ride. A compressor system with in-cab gauges or wireless controls can be added later for easy monitoring and adjustment on the go.
Built Tough for Long Hauls: Reinforced Air Bags and Corrosion-Resistant Parts
When you’re relying on suspension support day after day, durability counts. Each LoadLifter 5000 Ultimate uses 2-ply, fabric-reinforced rubber air springs with high-strength Zytel nylon endcaps that are lighter and more corrosion resistant than steel. Exclusive roll plates guard against damage from moving parts under the truck while increasing spring capacity. With quality brackets, hardware, and urethane jounces that need no maintenance, this setup is built to handle real work through heat, cold, and long miles without leaking or wearing out.
Simple Setup You Can Do Yourself: Brackets and Hardware Included
Installing suspension upgrades shouldn’t be complicated. The system includes mounting brackets, hardware, manual inflation valves, and air lines so you can bolt everything in with standard tools. With a clean layout and easy-to-reach valve mounting on the bumper or another accessible spot, you can be up and running quickly. Once installed, just add air and hit the road knowing your load is level and your suspension is supported for whatever the day brings.
Specs
Weight and Capacity
- Load-leveling capacity: up to 5,000 lbs
Pressure
- Adjustable air pressure: 5 psi - 100 psi
Warranty
- Lifetime warranty
- 60-Day satisfaction guarantee
Note
- Important: LoadLifter 5000 Ultimate springs will not increase your vehicle's weight-carrying capacity. Do not exceed the manufacturer's recommended weight limit.
88211 AirLift Load Lifter 5000 Ultimate Air Springs with Internal Jounce Bumpers - Rear Axle
This Product Fits The Following Vehicles
- 2008 - 2013 GMC Sierra 1500
- 2014 - 2018 GMC Sierra 1500 2 Wheel Drive
- 2014 - 2018 GMC Sierra 1500 4 Wheel Drive
- 2007 - 2007 GMC Sierra New Body 1500
- 2008 - 2013 Chevrolet Silverado 1500
- 2014 - 2018 Chevrolet Silverado 1500 2 Wheel Drive
- 2014 - 2018 Chevrolet Silverado 1500 4 Wheel Drive
- 2019 - 2019 Chevrolet Silverado 1500 LD 2 Wheel Drive
- 2019 - 2019 Chevrolet Silverado 1500 LD 4 Wheel Drive
- 2007 - 2007 Chevrolet Silverado New Body 1500
Customer Satisfaction Score:
73% were satisfied with this product
27% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- etrailer mistake
Ratings & Reviews
4.7
1540 reviews
by:
Robert
09/04/2026
Works as expected. Happy with purchase.
by:
Ray
04/18/2022
Great product,arrived in a couple days,took about 10 minutes[to drive truck to son in-laws. he and his brother installed] made a big difference in handling a Salem 26tbud camper.the team at e-trailer was a big help in choosing the correct kit for my 2010 GMC 1/2 ton .
by:
Cread
02/06/2024
2018
GMC
Sierra 1500
Very quick response when I asked a question great shipping time haven't installed the product yet but the quality and packaging looks great
by:
Henry
06/27/2024
Excellent air bags!
by:
Jeremy
02/13/2019
I'm extremely pleased with this product. It was pretty easy to install them, took me 3hrs. And they delivered right as expected. Thank you e trailer, i will be buying from you again.
by:
Thomas
05/13/2021
2018
Chevrolet
Silverado 1500
by:
Tanner (@Spankyraptor)
08/12/2025
2020
Ford
F-150 Raptor
Works amazing. The install was a little more difficult than it appears… It actually took me and a couple other guys five hours to get it completely installed.
There was a lot of cutting/grinding metal to make pieces fit properly, and had to drop the axel completely… I think that’s only for my gen 2 raptor.
At the end of the day, though I’m very happy with the result
There was a lot of cutting/grinding metal to make pieces fit properly, and had to drop the axel completely… I think that’s only for my gen 2 raptor.
At the end of the day, though I’m very happy with the result
Tanner @.
8/12/2026
Product works great and helps level the truck during towing. I have noticed a difference in the amount of travel my back wheels have when offloading. But I knew that would be a sacrifice.
by:
David
08/09/2026
2024
GMC
Sierra 1500
I was easy to install just a few hours. Everything in the kit fit well. It would be nice if an extension brackets were provided for the brake line/abs wire mounting bars would be included like the brake line adapters that’s provided in the kit is my only recommendation to make it top notch.
Claire H.
8/11/2026
Glad to hear the install went smoothly! Thanks for the suggestion on the brake line/ABS brackets too. Definitely something that could make a good kit even better!
by:
Matt
03/23/2025
2024
Chevrolet
Silverado 1500
Great instructions and easy installation! Fit perfectly! Loaded my tractor to test them out and they completely leveled my sagging truck with 42psi.
Brooke M.
3/24/2025
Happy to hear these are getting the job done! Your set up looks great, and man! What a beautiful picture. Blue, sunny skies, green grass, a cool breeze (I'd wager) perfect day to hitch up the trailer and get some work done!
Matt
3/24/2026
Been great! I really don’t like the internal jounce stops though. When you are unloaded and running lower bag pressure, a dip or bump will hit the bump stops really hard and jar your passengers in the backseat. It’s almost too uncomfortable to ride in the backseat now. As for the loaded and high pressure performance it’s great! Great handling and no sag at all when towing.
by:
Debbie
08/17/2026
2024
Nissan
Titan XD
Just had them installed, I’ll be hauling a 9800lb travel trailer soon. That will be the real test!
Added 40lbs of air, they sit the rear of truck up nicely.
Added 40lbs of air, they sit the rear of truck up nicely.
Mike L.
8/19/2026
Nice job Debbie, please let us know how they handle your trailer!
by:
Lloyd III
01/20/2026
The truck rides much better now, though I haven’t yet towed with the air bags yet. The bags took out that annoying side to side movement.
Just great!
Easy to install.
Just great!
Easy to install.
Kate F.
1/21/2026
Install looks fantastic Lloyd! Glad to hear they helped with the side to side movement. What kind of trailer are you going to be towing with the new set-up? Fun camper, work trailer?
by:
Zachary
12/30/2025
Deliver was awesome, installation was a little more complicated than expected but had installed big wig sway bar and torklift lower wedges added some unexpected fitment modifications but I can say has delivered results I wanted.
Nick S.
1/5/2026
That is great to hear, even with some modifications I am glad this is what you were wanting. That truck bed camper set up looks awesome. Do you have any big trips planned this year?
by:
Woody Keitt
09/16/2025
I purchased a set of these airbags for my old truck from etrailer and ran them for 17 years pulling a 42’ fifth wheel without any problems. So there was no hesitation for me to order the same for my new truck. I looked up everything I needed up on the etrailers site and called Josh at etrailer and he verified what I needed and got it on order. Also he verified my onboard compressor would work with the new air bags. Everything was received in a few days as usual. The airbags came with very good instructions and were no trouble to install and installation went quickly and have been preforming great. etrailer is always my go too for my truck and camper parts, also the bonus is if you have any problems or questions you can call etrailer and talk to a real person and get any problems corrected. etrailer for the win.
by:
Tommy
07/08/2025
I did the installation myself with auto ramps and a bottle jack. The instructions were good, however, some of the pictures were dark and hard to see. At 60 PSI and no load the truck rides like it has no shocks so I have been running 10 PSI and it seems to be great. 2015 F250 4x2 ext cab. I drilled the TAG screws and install the air fill ports in there place.
Gwendolyn Y.
7/23/2025
That’s a pretty clever spot for the air fittings, I’m definitely taking note for the future! Also, if you ever run into instructions where the images are hard to see, feel free to reach out. We’re happy to email you a clearer digital copy anytime!
by:
Must Have!
10/21/2025
Toyota
Tundra
Incredible difference! Even with a weight distribution hitch i couldn’t get my toyhauler and tundra level. The internal jounce alone raised my hitch several inches but with air, Wow! Also note, you CAN keep the RAS helper springs installed. You just have to pry a little when installing the U-bolts.
by:
James
08/21/2026
ford
F-250 Super Duty
Good system seems to made very well. I also got the Airlift Compressor as well Would have done 5 stars but the quick mount doesn't fit a 2025 F250 frame. About an inch to small. DIRECTIONS are terrible, pictures are blurry. Had to you tube the install. for that much money a couple of more pages explaining better with clear pictures.
by:
Emil
05/26/2025
The AirLift 5000 work great. The installation brackets didn't work for my Toyota RV & I had to fabricate the ones that'd mount to the frame. Otherwise, awesome improvement to the stability & ride.
Brooke M.
5/30/2025
What all did you end up having to do to the brackets to get them to fit, if you don't mind sharing?
Brooke M.
6/2/2025
@Emil That's awesome! Big brain moves, as I like to call them. Thanks for sharing your solution! Maybe someone else will read this and be able to to do the same for their situation. :)
Emil
5/26/2026
Still good
by:
Tom K
07/23/2025
Overall I am very pleased with the LoadLifter 5000. I purchased for a 2017 Tundra 1794 which we pull a 26' travel trailer. Prior to purchase the truck & trailer had a noticeable sag and it was challenging to distribute the weight in the trailer to reduce the sag. With the LL5000 the sag is eliminated with around 40 psi and the overall feel of the truck & trailer was much more solid and less bouncy when going over rough roads. Also, I was able to haul some lumber several times were the load was around 1,700 lbs which was 600 lbs over the stock capacity of the Tundra of 1,100 lbs...this was done with 60 psi. The LL5000 really showed their performance there with no sag with this load. The only reason I give a 4 out of 5 stars is the drive performance when not carrying a load or towing the trailer. Unfortunately the drive is not as smooth as the stock configuration. I've tried adjusting the pressure from 0 psi thru 30 psi in intervals of 5 psi and unfortunately there's some added bumpiness no matter which psi is selected. Overall, at around 10psi that seems to be the best ride but again, not the smoothness of the stock configuration. But if you're needing to eliminate sag with a trailer or boost your haul capacity, the LL5000 will definitely satisfy those needs.
by:
Brian
05/14/2025
gmc
Sierra
VERY GOOD FIRST IMPRESSION!
I have a 2020 Sierra 1500 AT4. I have the back loaded with a DECKED drawer system full of tools, plus all my gear in tubs for investigating fire scenes. My amazing pickup was nearly riding the bump stops all day. On a bumpy road, it was pretty taxing. Off-road was brutal. After some research I found this kit to fit my AT4 truck, part #88388.
You will need tall jack stands for this project. We ended up bracing ours on the rear leaf spring perches due to exhaust routing.
This is a brand new install, so time will tell as to how it holds up, but I have high expectations. This kit comes with paper instructions that are pretty spot-on. The pictures were helpful, and the instructions are detailed enough for a novice to understand. With one extra set of hands, I installed this kit in about 2 hours. I mounted the single fill valve in my gas-fill area, hidden behind the fuel lid. No bending over to add or release pressure.
After the install, I ran the pressure up to 40 psi as recommended. I got about 2 1/2” of lift out of that. I pulled a trailer home from the shop, and my truck rode like brand new. For my daily cargo, I think 40 pounds is just about perfect. And my tailgate is back at belly button height again. My headlights are shining where they should be shining. My bottomed-out ride is now compliant and comfortable.
The parts seem to be quality, and I had zero fitment issues. The only specialty tool was the T40 TORX tip for removing brackets from the axle front. You need it before you start. This kit is an easy install with a basic 3/8” socket set, a couple box end wrenches, and a couple other basic hand tools. This project should not scare too many people away.
Pro tip: You may think you can do it without taking off the tires. DON’T!! You’ll be pissed off at your truck and anyone nearby. The time savings will be worth it.
Also, the parking brake is on the back axle. Chock the front tires and/or put your rig in 4 low before lifting the back end.
I have a 2020 Sierra 1500 AT4. I have the back loaded with a DECKED drawer system full of tools, plus all my gear in tubs for investigating fire scenes. My amazing pickup was nearly riding the bump stops all day. On a bumpy road, it was pretty taxing. Off-road was brutal. After some research I found this kit to fit my AT4 truck, part #88388.
You will need tall jack stands for this project. We ended up bracing ours on the rear leaf spring perches due to exhaust routing.
This is a brand new install, so time will tell as to how it holds up, but I have high expectations. This kit comes with paper instructions that are pretty spot-on. The pictures were helpful, and the instructions are detailed enough for a novice to understand. With one extra set of hands, I installed this kit in about 2 hours. I mounted the single fill valve in my gas-fill area, hidden behind the fuel lid. No bending over to add or release pressure.
After the install, I ran the pressure up to 40 psi as recommended. I got about 2 1/2” of lift out of that. I pulled a trailer home from the shop, and my truck rode like brand new. For my daily cargo, I think 40 pounds is just about perfect. And my tailgate is back at belly button height again. My headlights are shining where they should be shining. My bottomed-out ride is now compliant and comfortable.
The parts seem to be quality, and I had zero fitment issues. The only specialty tool was the T40 TORX tip for removing brackets from the axle front. You need it before you start. This kit is an easy install with a basic 3/8” socket set, a couple box end wrenches, and a couple other basic hand tools. This project should not scare too many people away.
Pro tip: You may think you can do it without taking off the tires. DON’T!! You’ll be pissed off at your truck and anyone nearby. The time savings will be worth it.
Also, the parking brake is on the back axle. Chock the front tires and/or put your rig in 4 low before lifting the back end.
Gwendolyn Y.
5/15/2025
Wow, Brian. Thanks so much for your in depth review and experience with installing the air bags. You gave some really solid tips and advice, especially the one about removing the tires. How's the ride now when you're off road?
Gwendolyn Y.
5/16/2025
@BrianC Thats awesome that the bags were able to meet your expectations. I'd also take it as a win if it drives like new now!
by:
Dan
05/05/2025
I run an arctic fox 811 on a f350 single wheel, and these have been a game changer, no issues and helps that ride quality with the weight of the truck bed camper in the back. Having the air chucks in the fuel door is a recommendation I would recommend to anyone going without a on board air compressor
Brooke M.
5/6/2025
That's pretty awesome, Dan. Thanks for sharing that photo too- it's helpful to see what you're talking about. :) Do you take your camper on any hunting trips?
by:
Slater
05/07/2025
I installed these on my Tundra and did the install myself. Easy to install. The video's on the website are helpful as well as searching on youtube for more videos. I use these for towing our travel trailer. They work great for inflating and leveling the truck and trailer. I would buy again if my next truck did not have them installed.
Brooke M.
5/9/2025
Wow that's great, Slater :) Did you get the travel trailer a year ago too, or have you had it for a while? Any recommended destinations for your viewers at home?
by:
Jason
10/18/2025
Toyota
Tundra
These bags have been great! I installed them, along with the compressor, on my 2024 Tundra. I pull a 6k lb camper and was getting about 3” of squat. I run 45 lbs in them and it reduced the squat to only about 1”. Great price to fix my problem.
by:
David
06/16/2026
Toyota
Tundra
etrailer delivered these in four days which was a pleasant surprise. The Load Lifter 5000 were easy to install and all of the parts fit perfectly. The installation instructions were spot on as well. I tried to save a little time by leaving the wheels mounted, that turned out to be a mistake, so I removed the wheels mounted on the second side and saved about 45 minutes. The loadlifters perform exactly how I want. They took all of the sway out of my tundra while hauling my truck camper.
by:
Todd
08/29/2025
Easy install thanks to a Great Video & decent paper instructions. I installed them using a single line for air compression. Extremely pleased with the performance & quality. Will be ordering the "Wireless One" onboard compressor shortly to complete the project! Great job, folks!!
by:
M Tuck
08/03/2026
2012
Ford
F-150
works very well. i installed them on a 2012 Ford F-150 towing a Grand Design 2600 RB. the airbags substantially helped cut down the bouncing when going over big bumps, bridge decks, etc. also helps with the side winds. very happy with set up.
25
1540
true
Show More Reviews
See what our Experts say about this Air Lift Vehicle Suspension
- What Air Bags do You Recommend for My 2018 Chevy Silverado 1500 High Country?For great air springs for your 2018 Chevy Silverado 1500 High Country to help with tongue weight, I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88211 (for 8-foot beds only) or # AL88204 (for all other bed sizes). Not only do these air bags fit 2-wheel and 4-wheel drive models, they also provide you with 5,000 pounds of load-leveling capacity that can help with sag and increase handling. It is important to note that air bags are not...
view full answer... - Air Suspension for 5th Wheel Towing with a 2007 GMC Sierra 1500 4X4The Firestone Ride-Rite Air Helper Springs # F2430 are not compatible with an in-bed hitch like what you have for 5th wheel towing with your 2007 GMC Sierra 1500 4X4, but I do have some other air suspension solutions from Air Lift for you. If you occasionally tow your 5th wheel with your GMC Sierra then you need the kit # AL57204 for a bed shorter than 8' (won't fit with a B&W 5th wheel hitch ) or kit # AL57211 for an 8' bed. If you tow your 5th wheel pretty often then you need kit # AL88204...
view full answer... - Does Air Lift Offer 7,500LB Spring Kits For 2014 Expedition, 2015 Silverado 1500 or 1996 P30 ChassisBryon, the reason you are having trouble finding what you are looking for is because they do not exist. Air Lift does not make any kit for your 2014 Ford Expedition. For your 2015 Chevy Silverado 1500 we only have 5K spring kits. They have one for an 8' Bed # AL88211 and for the Short Beds # AL88204. For your 1996 P30 we do have the 5K Kit # AL88203 but you must ensure you have a chassis with GVWR of 14,500lbs or less. You will be able to use the Air Lift WirelessAIR Suspension System...
view full answer... - Will Air Lift Air Bags Fit 2010 GMC Sierra 1500 With 3" LiftHey Cheyenne! What size is your truck bed? If you have the 8' bed then the Air Lift # AL88211 is the correct part. If you have a shorter bed you need the # AL88204 instead. These will work with your lift kit and help level your suspension. The nice thing about them is that they are adjustable so you can set them however you want for regular driving and then for towing. With that 3" lift you will also need to add in a spacer. To find the correct spacer you need to use the formula H - A...
view full answer... - For 2015 Chevy Silverado 1500 What is Difference Between Air Lift Kits AL88211 and AL88204Hey Andy, great question but there is essentially no difference between the part # AL88211 and # AL88204 for your 2015 Chevy Silverado 1500. The kits are basically identical and both fit your truck. Basically they had to make the part # AL88204 for the Limited models in 2019 but found that it also fit the same trucks as the # AL88211 so there is a lot of overlap.
view full answer... - Will AL88211 Work On My 2018 GMC 1500 With In Bed Hitch?Hey Charles, Having that in bed hitch is not going to prevent you from installing the Air Lift # AL88211. This air bag kit is compatible with an in bed hitch and does not interfere with the mounting brackets. There is drilling required for this install, I will attach the instructions below and that step is found starting on page 12, but you are not going to have any fitment issues. That Air Lift kit is designed for 8 foot bed trucks only. If you have a short bed GMC I recommend # AL88204....
view full answer... - Airlift Kit Compatible with 5th Wheel Brackets on 2018 Chevy Silverado 1500Airlift does offer LoadLifter air bag kits that are compatible with the 5th wheel brackets already installed on your 2018 Chevrolet Silverado 1500, but the air bags that fit your previous 2015 Silverado 3500 are different enough that they are not a fit for your 2018 half ton. As long as your truck doesn't have the MagneRide suspension, I recommend the Air Lift LoadLifter 5000 Ultimate Air Springs with Internal Bumpers part # AL88204 (if you have a 5 ft.9 or 6 ft. 6 bed), or the Air Lift...
view full answer... - Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System We offer a replacement air bag for the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle item # AL88211. You will need the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System - Rear Axle - Qty 1 item # AL84297. This air bag with an internal bumper replaces 1 spring in your LoadLifter 5000 Ultimate air suspension system for rear axles.
view full answer... - Recommendations For Reducing Rear End Sag On a 2017 Chevrolet Silverado 1500 4X4I recommend using a Fastway e2 Weight Distribution # FA92-00-0800 when connecting your travel trailer to your 2017 Chevrolet Silverado 1500 since you are only getting the sag when towing. This is the best route to go since a weight distribution transfers the hitch weight more evenly across your Silverado rather than just reducing the rear end sag. With the weight more evenly transferred across your suspension it will provide better braking and stability. If you also haul heavy loads then...
view full answer... - Suspension Enhancement Recommendation for 2014 Chevy Silverado 1500 Towing Fifth WheelFor an air bag kit that fits your 2014 Chevy Silverado 1500 towing a fifth wheel trailer I would recommend the # AL57204 for if you have a short bed truck or the part # AL88211 for if you have an 8 foot bed. Now if you were to ask me what suspension enhancement was the best option for your truck I would instead have recommended the RoadActive Suspension Kit # RAS54FR which offers the best support that is easily adjustable and improves handling and stability when loaded and unloaded.
view full answer... - Difference Between Air Lift LoadLifter 5000 # AL88204 and # AL88211 on 2016 GMC Sierra 1500The only differences between the two Air Lift LoadLifter 5000 parts is fit. The # AL88211 is designed to fit your 2016 GMC Sierra 1500 only if it has an 8 foot bed; otherwise you would need # AL88204. Apart from that they would be the same product for your Sierra. The LoadLifter 5000 offers, as the name suggests, up to 5,000 lbs of load-leveling capacity. They will be a great asset in terms of leveling your truck while also improving your truck's handling when hauling a load or towing....
view full answer... - Which Air Bag Kit Do I Need for a 2019 Chevrolet Silverado 1500 LD?I have a solution for you and a set of compatible air springs but I checked with AirLift and the Air Lift LoadLifter 5000 item # AL88288 you were looking at will not fit the 1500 LD. For your 2019 Silverado 1500 LD you will want the AirLift Item # AL88211 kit. This kit is custom fit for your Chevy and reduces the strain on your rear suspension, increases safety, and compensates for uneven loads. For added convenience and adjustability I recommend adding the item # AL74000EZ onboard air...
view full answer... - Are The Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88211 Dual PathYes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88211 comes with two separate Schrader valves so that you can air up each air spring individually. If you're also looking for a dual path on-board compressor then I recommend the Air Lift WirelessAIR Compressor System # AL58WQ. This comes with easy-mount brackets to avoid having to drill into the frame, making the installation faster. The included remote and Bluetooth compatibility will allow...
view full answer... - AirLift Rear Air Springs for 2018 GMC Sierra 1500 Crew 2WD Short BoxAirLift rear axle air bag suspension kit # AL88211 only fits the long bed version of your Sierra so for your short bed pickup you'll instead want to order kit # AL88204. This is a no drill installation unless you have a 5th wheel hitch; in that case you will need to do some drilling. For extra air line you can use any brand of standard 1/4-inch air line like # F99ZR. I recommend using an air line cutting tool # AL10530 to ensure clean leak-free cuts. I also recommend that you consider...
view full answer... - Will Air Lift Air Bag Helper Springs Fit a 2017 GMC Sierra 1500 4x4 with Draw-Tite Gooseneck HitchAir Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88204 will work with the Draw-Tite gooseneck trailer hitch on your 2017 GMC Sierra 1500 4x4 as long as your truck is a short bed. This kit does not fit long bed models. There are special instructions for installation on trucks that have 5th wheel (or gooseneck in this case) frame brackets already installed. If your truck is a long bed you would need kit # AL88211. It, too, has separate instructions for 5th wheel/gooseneck brackets.
view full answer... - Difference Between Two LoadLifter 5000 Ultimate Helper Springs for 2017 GMC Sierra 1500The two Air Lift LiftLoader 5000 Ultimate Air Helper Springs you mentioned are basically the same kit. However, they're not exactly the same and not for the exact same truck. Both are for the 2017 GMC Sierra 1500 by the # AL88211 is for the 8 foot bed model and # AL88204 is for short bed trucks.
view full answer... - Air Helper Springs For A 2012 GMC Sierra 1500 Yes, The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88211 are confirmed to fit your 2012 GMC Sierra 1500. The air bags have a 5,000 pound capacity. The springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. The springs are made out of 2-ply, fabric-reinforced rubber. They have an adjustable air pressure between 5 psi to 100 psi. The Air Lift WirelessONE Compressor...
view full answer... - Compatible Air Bag System with Curt In-Bed Hitch on 2017 Chevy Silverado 1500I have a solution for you, but the Firestone # F2430 are not designed to work with in-bed hitches like the Curt # C16400-204 that you're looking at for your 2017 Chevy Silverado 1500. Instead, I recommend using the AirLift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle # AL88211 (8 ft bed) or # AL88204 (short beds). These are also an air bag system like the Firestone # F2430 you were looking at, but I really like that these have an internal jounce bumper...
view full answer...
Do you have a question about this Vehicle Suspension?
Info for this part was:
Written by:
Tricia G
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Joshua S
Updated by:
Adele M
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Alex H
Updated by:
Noah M
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Brent H
Installed by:
David F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ray
4/19/2023
The air lift kit is working great.Made big difference in driving and handeling.