See what our Experts say about this Rhino Rack Roof Rack

• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Dimensions of Rhino-Rack Heavy-Duty Roof Rack Crossbars
  The Rhino-Rack Heavy-Duty 50-Inch Roof Rack Crossbar # RB1250S has cross-section dimensions of 1-7/8-inches tall and 1-5/8-inches wide, as shown in the photo I prepared for you. We also offer two bars as a set # RB1250. The vehicle known as the Mitsubishi Pajero in other countries is called the Montero in the North American market. If you happen to have a 2006 model year with factory installed roof rails that run front-to-back this crossbar can be installed using leg kit part # CXB.
  view full answer...
  
• Can I Carry Two Kayaks Side by Side on My Roof Rack?
  The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
  view full answer...
• Can I Use The Batwing Awning # RR33200 With My Factory Crossbars?
  The Rhino Rack Batwing Awning # RR33200 is a bolt on installation so it won't be able to work with your factory crossbars. You'll need to add another roof rack system with tracks to be able to use the batwing awning. You can use something like these legs # CXB and these bars # RB1250. These have a channel which will work with the hardware on the Batwing. You will need this mounting kit # RR31102. I personally have not used the XTM 270 Batwing Awning before. So I think that the batwing...
  view full answer...
• Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
  For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
  view full answer...
• Crossbar Pads to Carry a Surf Board on Rhino-Rack Heavy Duty Crossbars
  Yes, we do have foam pads that will fit around your Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250 and allow you to carry your surf board. You can use the Rhino-Rack Crossbar Pads w/ Tie-Downs # RRRWP04. These pads will fit your HD crossbars. I have included a picture from the instructions manual that shows this as a fit.
  view full answer...
  
• Is Rhino-Rack 2500-Series Roof Rack Compatible with Thule Force Cargo Box # TH624
  The Rhino-Rack 2500-Series roof racks can include either square Euro crossbars, their Vortex Aero bars or their heavy-duty rectangular bars. The Euro square bars and the Vortex Aero bars both are fully compatible with the Thule Force XT Cargo Box # TH6356B. The heavy-duty cross bars # RB1250 are not. The Thule Force XT requires that the spread between the crossbars be at least 23-5/8-inches. As long as the rack has this minimum spread and uses one of the two compatible bar types it will...
  view full answer...
• 2017 Hyundai Tucson Heavy Duty Roof Rack Recommendation
  Thank you for all of the info! I definitely have a roof rack solution so you can carry some ladders with your 2017 Hyundai Tucson but at this time (February 2022) Rhino-Rack doesn't have a roof rack fitment for your Tucson so we won't be able to install a roof rack using the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250. As an alternative option I recommend going with the Yakima HD Crossbar roof rack system. The crossbars won't increase the weight capacity of the roof rack since your...
  view full answer...
• Weight Capacity Of The Rhino Rack RLTF Roof Rack System.
  If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
  view full answer...
• How to Determine if Rhino-Rack CXB Leg Kit Fits a 2022 Subaru Forester for HD Bars & Roof Top Tent
  The Rhino-Rack CXB Leg Kit for Raised, Factory Roof Rack Side Rails # CXB will fit the factory rails on your 2022 Subaru Forester as long as those rails are not more than 1-1/2" tall and not more than 2-1/4" wide. This would allow you to use Rhino Rack HD cross bars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250. It is also important to note that since these use the Rhino Rack HD bars, you may have a difficult time finding a rooftop tent that fits. That is because the HD bars...
  view full answer...
• Heavy Duty Roof Rack Recommendation for 2013 Hyundai Sonata
  For stuff like lumber from a home center type store I would recommend the Rhino Rack HD roof rack part numbers # RB1250, # RRRLKHD, and # DK250 as it is confirmed as a fit and has large square bars that are great for what you are looking for. For load stops you would then want the pat # RRRLH1. Then for cinch straps part # RRRTD35P. This rack has a capacity of 110 lbs but you would also need to check the roof capacity of your vehicle in the owners manual.
  view full answer...
• Will the Inno Shadow 16 Fit on Rhino-Rack Crossbars on My 2013 Toyota Prius?
  As far as the fitment of the Inno Shadow 16 Cargo Box # INBRA1210BK being able to clamp around a Rhino-Rack roof rack, it depends on what type of Rhino-Rack crossbars you have on your 2013 Toyota Prius. If you have an aero crossbar system that involves the Rhino-Rack Vortex crossbars like the ROC25 # RR44SR, the Shadow 16 will clamp around those as well. The only caution is that the Shadow 16 will not fit Rhino-Rack Heavy Duty Crossbars like the # RB1250. I am happy to say that all 4...
  view full answer...
  
• What are the Dimensions of the Hi-Lift Jack Mounting Brackets # RJHB
  I went out to the warehouse and found that the internal dimension of the Hi-Lift Jack Mounting Brackets # RJHB would allow a post that is about 1" thick and about 2-3/4" high. These come with T-bolts that let you mount them on Rhino-Rack Heavy-Duty roof-rack crossbars like part # RB1250.
  view full answer...
  
• Leg Spacers for the Rhino-Rack RCH Legs
  If you're looking for the leg spacers to mount Heavy-Duty crossbars to your RCH Legs, part # RRRCH6, then the correct part number for those are # RRQMHD05. With these, you'll be able to mount Rhino-Rack HD Bars, part # RB1250. This may seem confusing at first because the fit-guide states that these are not compatible with your 2007 Lexus GX 470. However, in this particular (and very rare) case, the specific vehicle does not matter because these are attaching to the legs. In other words,...
  view full answer...
• How Do Roof Racks Attach to a 2012 Hyundai Elantra
  Rhino-Rack 2500 Series Leg Kit # RRRLKHD is just the legs but for them to actually fit your 2012 Hyundai Elantra you need the proper clamp kit. If you have a 4-door sedan with no rails or crossbars already on the roof you would use clamp kit # DK301 and bars # RB1250. If you have a Touring model with no rails or crossbars you would use clamp kit # DK010 and bars # RB1250. Clamp kits have what is basically a hook that attaches to the roof right above the doors in the door jamb. If you...
  view full answer...
• Roof Rack Recommendation to Carry 2 Kayaks on 2014 Toyota Prius C and 2010 Toyota Prius
  There is a Rhino Rack roof rack that will fit both vehicles if you switch out the Custom DK Clamps and Pads. For the 2010 Toyota Prius, you will want the following parts: Crossbars # RB1250 Leg Kit # RRRLKHD Custom DK Clamps and Pads # DK195 For your 2014 Toyota Prius C you will want to add Custom DK Clamps and Pads # DK351. Before you attempt to carry 2 kayaks on the roof of your Prius you will need to consult your owner's manual to determine if you have the carrying capacity for...
  view full answer...
• Will the 65" Rhino-Rack HD Crossbars # RB1650 Fit on My 2010 Mazda 3 Hatchback?
  I have an answer for you. Unfortunately, the 65 inch Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1650 are too long for your 2010 Mazda 3 Hatchback with fixed mounting points. With that being said, you can still have shorter Rhino-Rack Heavy-Duty crossbars on your vehicle. Our installation team here at etrailer has tested these shorter bars with your vehicle so that they will fall within the required dimensions of local traffic laws. For this system, you will need the following parts:...
  view full answer...
• Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
  view full answer...
• Will the Rhino-Rack HD Crossbars Allow Me to Transport 2 Kayaks on My 2014 Kia Sorrento LX?
  Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 50" Long - Qty 2 # RB1250B-2 (black) and # RB1250 (silver) are compatible with the bare roof on your 2014 Kia Sorrento LX without a vista roof. For a complete roof rack system, you will need the following parts: - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK179 For a J-style carrier...
  view full answer...
• Parts Needed to Move Rhino-Rack 2500 Series Roof Rack to 2014 Toyota Prius C
  A vehicle-specific portion of the Rhino-Rack roof racks for your 2014 Toyota Prius C is the Custom DK Clamps and Pad kit # DK351 that you referenced and this kit is used for a number of their 2500-series racks. You may also need a leg kit; which one will depend on the crossbars you have (the 2500 series includes several types). If you have the heavy-duty crossbar # RB1250 you will use leg kit # RRRLKHD; if you have Aero crossbars you'll instead use # RRRLKVA. The link provided will show...
  view full answer...
• Recommendations for Rhino-Rack HD Roof Rack on a 2013 Volkswagen Jetta Sedan
  I am happy to help you find a roof rack for your 2013 Volkswagen Jetta Sedan. For naked roofs, the roof rack will mount to the door frame of your vehicle using a custom fit hook. The Rhino-Rack HD # RB1650 does not have a confirmed fit custom mount for your Jetta, but the # RB1250 does. You will need the legs # RRRLKHD and custom fit kit # DK055 to complete your roof rack system. Check out the video below for a detailed explanation on how these racks are installed and why the custom...
  view full answer...
• Availability of Rhino-Rack Heavy Duty Roof Rack Option for 1997 Nissan Pathfinder w/ Roof Tracks
  We do indeed have a system that would work on your Pathfinder. In order to use the Rhino Rack Heavy Duty 50 inch long crossbars on your 1997 Pathfinder, you would use the leg system Rhino Rack specifically designed for the recessed roof tracks, part # RLTFMV. The rack has a 220 lb capacity, which could be limited by the roof's actual capacity if it's lower than that of the rack.
  view full answer...
• Rhino-Rack Heavy Duty Roof Rack for 2018 Volkswagen Passat
  The Rhino-Rack # Y01-140B-NT is designed to fit roof mounted tracks such as what would be found on a camper shell, it's not typically used on a vehicle roof. You can install a similar rack using the following parts: • Rhino-Rack Heavy Duty 50 inch crossbars, part # RB1250B-2 for black or # RB1250 for silver • Series 2500 Legs, part # RRRLKHD • Vehicle-Specific fit clips, part # DK323 This rack has a 165 lb capacity and is custom designed to fit your vehicle.
  view full answer...
• Which Rhino Rack Pioneer Platform Can Attach to Vortex Aero Crossbars
  I have a solution for you, but the Rhino Rack Pioneer Platform # RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of the Pioneer platform that can be attached to Rhino Rack Vortex Aero bars: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48" Long x 38" Wide # RR42114BF - Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum...
  view full answer...
• What Roof Rack Do You Recommend for a Camper Shell with Tracks?
  For a great roof rack system for your A.R.E. Mx truck cap, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 59" # Y02-490B-NT. The Rhino-Rack Roof Rack includes 2 Vortex Aero black, elliptical crossbars that you can use to hold ladder racks, conduit cases, and other work accessories. In addition, the Rhino-Rack Roof Rack crossbars come with a 220 pound weight capacity. I recommend checking the user's manual on your camper shell to make sure it can accommodate that much weight. If...
  view full answer...
  
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Can I Fit A Rhino Rack Pioneer Platform To My Retrax XR Series Tonneau Cover
  You have two options; The first option is to install the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers - Black - 65" Long, part # RRVA165B and part # RRRLT600. The feet attach directly to the RetraxPrO XR Hard Tonneau Cover - Retractable - Aluminum - Matte Black - Accessory T-Slots, part # RTT-80852. The Vortex Aero crossbars will attach to the the legs. With this fit you will be limited to Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 48"...
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• What Adapter Will Fit My Retrax Tonneau Cover to Let Me Use the Yakima OverHaul HD on My 2019 Tacoma
  If you have a Retrax tonneau cover on your 2019 Toyota Tacoma (5-ft. bed) like the RetraxONE XR # RTT-60851 or the RetraxPRO XR # RTT-80851, the adapter that you need to use the Yamkima OverHaul HD # Y01151-58 is the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. As far as mounting a Rhino-Rack pioneer platform on the OverHaul HD, the only platforms that will fit are the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF which is 48" long x 38" wide and part # RR42115BF...
  view full answer...
• What Mounting System Do I Need to Use for the Pioneer Platform # RR42108BF on My Leer 100XR Shell?
  I have a great platform solution for you. Unfortunately, the Rhino-Rack Pioneer Platform 72" Long x 56" Wide RR42108BF is discontinued. However, with the recommended fit of the Rhino-Rack Pioneer Platform Rack for Short Camper Shells - Backbone - 60" Long x 56" Wide # RR63ZW, you will have both the platform and the mounting hardware available for installation with the modular Backbone. The Modular Backbone is designed to fit the track on the 100XR.
  view full answer...
• Roof Rack For A 2004 Acura TSX
  Hi Manny! We do have a couple options for custom fit roof racks that will fit your 2004 Acura TSX, but Rhino Rack does not have one available, unfortunately. That doesn't mean you are completely out of luck, but you would need to install a Rhino Rack set up a different way. I have the parts needed to do this listed below: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks...
  view full answer...
• Can Rhino Rack Sportz Aero Crossbars be Used in ARE Cap Channels
  Hey Ken, yes you can use the Rhino Rack crossbar set part # RR25AG in the tracks of your ARE cap with the feet kit part # RRRLT600 and you'd be set. What are you planning on carrying with the rack?
  view full answer...
• Can the Pioneer Platform Rack Fit the Rebel Off Road Xplor Rack?
  Hey Dave, thanks for reaching out! Your best bet is going to be a combination of the Rhino-Rack Quick Mount Legs # RRRLT600. These mount directly to the Pioneer Platform Rack and then mount to a track system using the T-Bolts that are spaced 2-5/8" apart on center (see attached). I reached out to Rebel Off Road and they suggested checking out their Tent Standoff Brackets and/or their Cross Bar Mounting System, but none of this has been tested together so I can't confirm any of this will...
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Length of Rhino-Rack RT-Style Roof Rack Tracks RRRTS547 on 2017 Toyota Tacoma Double Cab
  The tracks included in the Rhino-Rack RT-Style Roof Rack kit # RRRTS547 (same as RTS547) are each 47" inches long. These are not the crossbars but the rivet-mount tracks that mount permanently to a vehicle or camper shell roof to allow installation of track-mount legs such as # RRRLT600. These legs in turn accept crossbars like # RRVA150B-2 which are 59-inches long; other lengths are available. It sounds like you may prefer a custom-fit cab roof rack rather than a general-purpose track-based...
  view full answer...
• Will Rhino-Rack Pioneer Platform Fit Westin EXP Truck Topper on 2019 Chevy Colorado
  Hey Ash! It is possible to add a Rhino-Rack Pioneer Platform to the Westin EXP Truck Topper # W76PT. The topper is 75.6" long and 63.3" wide. The distance between the mounting rails is 38.78" and the rails are 54" long. The Rhino-Rack Quick Mount Legs # RRRLT600 will fit the rails and are compatible with the Pioneer Platform. These can slide along the crossmember to match the width of the rails on the topper for installation. For the platform I recommend using the # RR59AP which is 75"...
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Recommended Crossbars and Feet for a LEER Camper Shell with Thule Tracks
  Ok Sean, so I was able to track down some info about your LEER camper shell and it looks like you ordered it with the Thule tracks already installed. So, if that's the case, you can then use either the Thule Tracker II feet with the Thule WingBar Crossbars # TH711520, or you can use the Rhino-Rack Vortex Aero Crossbars # RRVA165B-2 with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 for a more cost-effective non-Thule setup.
  view full answer...
• Recommended Roof Rack Crossbars for Lance Cab Over Camper With Factory Tracks
  For your Lance 855s Camper with standard tracks I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and then crossbars like the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 # RRVA165B-2. Because I don't know the specific width of your tracks, I have given other length options below that are compatible with these legs. For 59 inch long bars use # RRVA150B-2 For 54 inch bars use # RRVA137B-2 For...
  view full answer...
  
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• How to Use Yakima Round Crossbars with a Set of Rhino-Rack RTC-Style Roof Rack Tracks
  There are adapters for the Rhino-Rack Quick Mount Legs part # RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other options for you.
  view full answer...
• Will 65" Rhino-Rack Crossbars Fit RetraxPRO XR Tonneau Cover T-Slots On A Ford F-150
  Hey Zach, Rhino-Rack crossbars have an 11-3/4" mounting track on the both sides of the bottom of the crossbar. At 65" this would mean that the spacing of the t-slots in your cover would need to sit roughly 55" to 64" apart in order to fit. To mount the 65" crossbars # RRVA165B-2 in the track you'll need their quick-mount legs # RRRLT600.
  view full answer...
  
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Replacement Leg Tower and Foot for a Rhino Rack RTL600
  Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600 but I have a two pack item # RRRLT600H.
  view full answer...
• Availability of Rhino-Rack Crossbars for BAKFlip MX4 With Rails on 2023 Chevy Colorado
  Hey Dustin! It is possible to add a Rhino-Rack crossbars to the BAKFlip MX4 Hard Tonneau Cover # BAK83AV. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 will fit in the tracks on the rails and then you can choose your crossbars. A ladder rack like the Yakima OutPost HD # Y01152-5855 uses 68" crossbars which are a pretty good fit on the Colorado. You might be able to use 65" bars like # RR85AG but I think the 71" Rhino-Rack Sportz Aero # RR25AG would be the best fit....
  view full answer...
• Will 59" Crossbars Work on a 2003 Chevrolet TrailBlazer EXT?
  Yes, they will Justin. The 59" Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2 will attach to the roof of your 2003 Chevrolet TrailBlazer EXT using the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item # RRRLT600. You are correct they are going to over hang quite a bit. The 46" Long Rhino-Rack Vortex Aero Crossbar item # RRVA118B are what's recommended for your Trailblazer. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will definitely work with Rhino-Rack crossbars....
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Weight Rating for the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  You are correct, the Rhino-Rack SG Roof Rack for Rain Gutters with Vortex Aero Crossbars, # RRSG59 that you linked to is 88 lbs. But don't worry, we have other options. I suggest you consider the Rhino-Rack Backbone roof rack system that starts with the, Backbone System, # RRRJLB1 using Rubber Bases, # RRQMFK06, Spacer Blocks, # RRQMHD05-2 and Quick Mount Legs, # RRRLT600 along with 59" HD Crossbars, # RB1500B-2. This will provide you a heavier rating of 175 lbs. however, please check...
  view full answer...
  
• What is the Weight Rating of the Rhino-Rack Gutter Mount Roof Rack on a 2022 Jeep Wrangler Unlimited
  The weight rating for the gutter mount system from Rhino-Rack is really 88 lbs for your 2022 Jeep Wrangler Unlimited with the hard top. Since there are many other options out there with a higher rating I recommend going a different direction. For your application I recommend the Rhino-Rack Backbone roof rack system which consists of the following: 59" HD Crossbars - # RB1500B-2 Quick Mount Legs - # RRRLT600 Backbone System - # RRRJLB1 Rubber Bases - # RRQMFK06 Spacer Blocks - # RRQMHD05-2 This...
  view full answer...
  
• What Backbone System Works w/ a 2023 Jeep Wrangler 4xe?
  There are tons of options for Jeep's so I would be happy to point you in the right direction. The correct back bone system with a pioneer platform for your 2023 Jeep Wrangler 4xe hard top is the item # JB0893 you were looking at. The Rhino-Rack Pioneer Platform Rack with Backbone Mounting System item # JB0893 measures 72" long x 56" wide. It has a 264 lbs capacity and weighs 94 lbs. If you are wanting a back bone system that mounts traditional crossbars you will need the following...
  view full answer...
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Will Rhino-Rack Roof Rack Fit 2006 Jeep Wrangler Rubicon
  The Rhino-Rack Roof Rack Legs # RL150S2 are designed to fit factory rain gutters on certain models of the Jeep Cherokee and Liberty. Unfortunately, there is not a rain gutter mount for your Rubicon. If you want to add the Rhino-Rack square bars shown with these legs to your 2006 Jeep Wrangler Rubicon you will need the following: -Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2 -Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 -Rhino-Rack RT-Style Roof Rack Tracks...
  view full answer...
• Will a Paddleboard Fit a Rhino-Rack Roof Rack on a 2015 Jeep Wrangler with a Hard Top
  Rhino-Rack SG Roof Rack # RRSG60 for rain gutters has a capacity of 88 pounds so provided that your 11 foot paddleboard is under 88 pounds then it can support the board. However, this roof rack has a narrow bar spread of 19 inches from the center of one bar to the center of the other bar meaning you would need to make certain that the board is tied down at the bow and stern and placed so that the weight is evenly distributed to both bars. Also since the crossbars are basically positioned...
  view full answer...
• Can I Upgrade To 71" Rhino-Rack Heavy Duty Crossbars Instead Of 59" Crossbars On 2012 Jeep Wrangler?
  For your 2012 Jeep Wrangler Unlimited with hard top, Rhino-Rack recommends using Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 along with Legs # RRRLT600, Backbone Mounting System # RRRJKB1, and Leg Spacers # RRQMHD05-2. While Rhino-Rack does not suggest using the 71" Heavy-Duty Crossbars # RB1800B-2 that you were looking at, you can certainly use them as long as they are not longer than the widest point of your vehicle which is usually the mirrors. My research tells...
  view full answer...
• What Heavy-Duty Crossbar Setup do You Recommend for My 2018 Jeep Wrangler Unlimited with Hard Top?
  For mounting a heavy duty crossbar setup on your 2018 Jeep Wrangler Unlimited JK, I recommend the following components: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" # RB1500B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - Rhino-Rack Backbone Roof Rack Mounting System # RRRJLB1 - Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs # RRQMFK06 - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick...
  view full answer...
• Front & Back Hitches With Accessories For Ultimate Mercedez-Benz Sprinter Van 3500
  The Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR is definitely the move for you, but if you plan on putting it in the front of your 2017 Mercedes-Benz Sprinter 3500, you'll need a front hitch # 306-X7352. For the back if you have a factory step bumper you'll need this hitch # 75601 and if you have a Standard bumper you'll need this one # 75549. In order to use the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR you'll need a class III hitch or higher. If you wanted to...
  view full answer...
• Recommended Rhino-Rack Roof Rack For a 2017 Mercedes-Benz Sprinter 2500 With Factory Side Rails
  For your 2017 Mercedes-Benz Sprinter 2500 with the factory rails I recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800B-2 with Rhino-Rack Quick Mount Legs # RRRLT600, Quick Mount Nuts # RRQMFK11-2 and Roof Rack Leg Spacer Blocks # RRQMHD05-2. You will need to replace the channel nuts that come on the legs for the larger M6 30 mm x 25 mm x 5 mm Zinc Nuts # RR96TB. The Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT only uses 65" long crossbars and the only recommended...
  view full answer...
• Can Tracks of Rhino-Rack # Y02-490B Be Cut To Desired Length?
  The Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long # Y02-480B can in theory be used on your 2010 Jeep JKU Wrangler hard top but it is not a confirmed fit. The tracks can be cut to your desired length. Because this system is not a confirmed fit, the rated capacity will most likely be more similar to the 99 lbs of the similar Rhino-Rack Track fit confirmed for your vehicle. That rack consists of # RB1500B-2, # RRRLT600, # RTC12JWMY11,and # RRQMHD05-2.
  view full answer...
• What Parts Do I Need To Install Rhino-Rack Roof Rack On 2020 Mercedes Benz Sprinter 2500 High Roof?
  Since your 2020 Mercedes-Benz Sprinter 2500 High Roof has factory roof rails running front to back then you can go with the Rhino-Rack Vortex Aero Crossbars or the Rhino-Rack Heavy Duty Square Bars. For the aero bars you need Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long # RRVA180B-2, Legs # RRRLT600, and Nuts # RRQMFK11-2. For the heavy duty square bars you need Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 71" Long # RB1800, Legs # RRRLT600, Nuts # RRQMFK11-2,...
  view full answer...
• Lockable Roof Rack and Snowboard Carrier for 2016 Jeep Wrangler Unlimited
  The Rhino-Rack Roof Rack # RRSG59 mentioned in your question for your 2016 Jeep Wrangler Unlimited is not compatible with any key lock system. However, they do have built-in security hardware because the legs can only be loosened by the special tool that comes with the roof rack. This roof rack has a weight capacity of 88 pounds, though you will want to check your vehicle owner's manual for its roof weight capacity. If you would like a roof rack that can be locked to your Jeep with a...
  view full answer...
• Recommended Roof Rack Compatible with 2007 Jeep Wrangler JK with Hard Top
  The # Y02-490B is not a fit for your Jeep. Instead you will want the following for the similar system: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600 Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JWMY11 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars # RRQMHD05-2 An alternative option to consider is the Rhino-Rack SG Roof Rack for Rain Gutters - Vortex Aero Crossbars - Aluminum -...
  view full answer...
• Is Drilling Required to Install Rhino-Rack Roof Rack on 2015 Ford Transit Connect Long Wheelbase
  I'm not 100 percent certain what you mean by "threaded sleeves" but if your have a 2015 Ford Transit Connect with a long wheelbase, you will need to drill holes in your roof in order to attach the Rhino-Rack RT-Style Roof Rack Tracks # RRRTS547, which is what you will mount the rest of the roof rack system to; there are no threaded holes with which to install this rack. Once the tracks are in place you will complete the installation by adding the Roof Rack Leg Spacer Blocks # RRQMHD05-2,...
  view full answer...
  
• Length of Rhino-Rack RT-Style Roof Rack Tracks RRRTS547 on 2017 Toyota Tacoma Double Cab
  The tracks included in the Rhino-Rack RT-Style Roof Rack kit # RRRTS547 (same as RTS547) are each 47" inches long. These are not the crossbars but the rivet-mount tracks that mount permanently to a vehicle or camper shell roof to allow installation of track-mount legs such as # RRRLT600. These legs in turn accept crossbars like # RRVA150B-2 which are 59-inches long; other lengths are available. It sounds like you may prefer a custom-fit cab roof rack rather than a general-purpose track-based...
  view full answer...
• Parts Needed to Carry a 16' Canoe in a 2017 Toyota Tacoma Short Bed w/ Deck Rail System
  The best option is going to be a combination of both a roof rack and a ladder rack. You can use the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799. This ladder rack is designed to be used with the rail system in your 2017 Toyota Tacoma and will provide you with crossbars that are similar to roof rack crossbars. Because of the length of your canoe, you will also want a roof rack so the canoe can be placed over the cab and truck bed to keep it secure and from sticking past the truck...
  view full answer...
• Recommended Roof Rack for a 2020 Toyota Tacoma Double Cab w/ No Rails
  For your 2020 Toyota Tacoma Double Cab truck, I recommend the Front Runner Slimsport Platform Rack item # FR44TJ. This system will mount directly to those holes you mentioned in your roof. This is a 55-15/16" long x 47-1/8" wide platform rack with an included wind fairing which will reduce drag. I have attached a picture below so you can see what this system will look like when installed. The Platform Rack item # FR44TJ is the only style of rack we have that will attach to the two sets...
  view full answer...
  
• Roof Rack to Fit a 2018 Toyota Tacoma with Fixed Mounting Points
  If you definitely want a Yakima roof rack then the clamp-style attachment is all that is available at this time. For their system I recommend CoreBar system using BaseLine towers # Y28TR, fit kits # Y06145 and # Y06128, and then either the 50 inch, part # Y00421, or 60 inch, part # Y00422, crossbars. Since your 2018 Toyota Tacoma has the fixed mounting points there are Rhino-Rack systems that fit. I recommend the Vortex Aero bars, part # RRVA126B-2, with # RRRLT600 legs, and # RRQMFK08-2...
  view full answer...
• Recommended Ladder Rack And Roof Rack For 2018 Toyota Tacoma With Tonneau Cover
  The Adarac Pro Series Custom Truck Bed Ladder Rack # A66ZR you were looking at, which also comes in Black # A76ZR, is the ladder rack you will want to go with. This is confirmed to fit your 2018 Toyota Tacoma 5' bed and it is compatible with tonneau covers that install inside the bed rails. Based on the photo you attached, it looks like your tonneau cover could possibly be covering up the stake pockets in which the ladder rack installs into. The only way to know would be to pop out the...
  view full answer...
  
• Roof Rack and Kayak Carrier Recommendation for 2019 Toyota Tacoma Double Cab
  For your 2019 Toyota Tacoma that has a naked roof and a double cab the roof rack I recommend is the Rhino Rack roof rack part numbers # RRVA126B-2, # RRRLT600, and # RRQMFK08-2 because this rack installs easily, has aero shaped bars which reduces wind noise. This rack also attaches to the factory fixed mounting points on your roof currently too which means it ties into your roof's structure that was intended for a roof rack. For a kayak carrier the Yakima JayLow part # Y04073 is what I...
  view full answer...
• Rhino Rack Roof Rack Fit Recommendation for 2018 Toyota Tacoma Double Cab Naked Roof
  For your 2018 Toyota Tacoma with a naked roof Rhino Rack does have fits for their roof racks on your vehicle. If you have the bars already you won't need the part # RRVA126B-2, but you will need the part # RRRLT600, and # RRQMFK08-2. If instead you have raised rails your kit may fit directly as I looked up your part number and it is supposed to be a kit that attaches to raised rails but it's been discontinued a while so info on it is hard to find and it was never test fit on a 2018 vehicle.
  view full answer...
• Recommended Drill Free Roof Rack for 2017 Toyota Tacoma Double Cab with Bare Roof
  Yes, there are plenty of drill-free roof rack options for a 2017 Toyota Tacoma Double Cab with Bare Roof. I recommend the Rhino-Rack Vortex Aero Crossbar System part # RRVA126B-2, part # RRRLT600, and part # RRQMFK08-2. This system attaches inside the door jambs using car clips. It has aero bars which work with most rooftop mounted accessories and the entire system is very cost effective compared to other options for this vehicle. It has a 220 lb weight capacity.
  view full answer...
• Recommended Roof Rack for a 2023 Toyota Tacoma Double Cab w/ No Roof Rails
  I would be happy to help you. To add a roof rack to your 2023 Toyota Tacoma double cab you will need the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600 Ditch Brackets for Rhino-Rack RLT600 Quick Mount Legs - 13 mm - Rivet Mount - Qty 4 item # RRQMFK08-2 This set of crossbars has a 165 lbs capacity. I have linked an installation...
  view full answer...