Custom Fit Roof Rack Kit With Y00228 | Y00425 | Y53TR
Item # Y84TB
Our Price: $688.80
Confirmed to Fit
2006 Honda CR-V
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
- All Info
- Reviews (218)
- Q & A (0)
- Videos (7)
- Photos
Yakima Roof Rack - Y84TB
- Crossbars
- Aero Bars
- 2 Bars
- 50 Inch Bar Space
- Yakima
- Black
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 50" JetStream SM - Black:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 8 (Set of 2):
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with factory track racks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000228 Landing Pad 8 for Yakima Control Towers
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00228 | Y00425 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Review - 2017 Honda CR-V
Speaker 1: Today on our 2017 Honda CR-V, we're going to be test fitting the Yakima JetStream roof rack system. This is going to be consisting of part numbers Y00425, these are the JetStream crossbars. Part number Y00148, these are the SkyLine Towers, and they kind of snap into place with our landing pads. And the landing pads are going to be part number Y00245. This is specifically for the Honda CR-V.It attaches to two pre-attachment points on the actual flush mounted side rails of your CR-V, and these bars are designed to work with a wide variety of accessories. This helps you put anything you don't want inside the vehicle, outside, or just to free up a little bit more space if you need to.
It can work with bike racks, cargo baskets, or cargo boxes, and the general shape of the bars is going to be an aerodynamic shape. That's going to help cut down wind noise and drag while you drive.Moving our end cap here, this also works with T-Track accessories, but unlike the others, you actually just push down the strip at the top here so the T-Track accessory just slides in there that way. A lot of the other styles out there, you'll have to remove the strip, cut it to length, and kind of go through a hassle to get this installed, and this eliminates that for you.At the ends here, we do have these plastic locks that can be taken out and removed, and replaced with the Yakima SKS lock system, so you can secure this to your vehicle and also make inaudible 00:01:28 with your accessories that you're hauling. And, once everything is finished with your trip, these just can pop out of place by opening the ends and we have these plastic pieces that fit on top here, so you don't have to remove the mounts, and they're ready to go for next time.Now that we've shown you how this looks here, let's go ahead and show you how it actually installs. We have our rear bar partially assembled on our table here.
We'll go through the process of installing it onto our vehicle. We have the bar and the towers applied on one side, so our next step is we're going to go to the tower here as well as the fit kit for our actual bar, and install that on the other side.Starting with our plastic piece here that just pushes in place on top of our tower until you hear a light click. Then we'll take our metal piece here, which attaches to this screw on the inside. Then you tighten that down with the included tool. You're going to hear two or three audible clicks once this is done, like so.
Then we can slide this into the bottom of the bar. Then our final step is putting in our end cap.Now we can move on to our actual mounting point here. We'll take the padded portion and these points here will fit into the holes in the bottom. Just kind of match up. Then just push them into place like so.
Then we'll take the screws and the flat washers and install them onto our fixed mounting points onto our flush mount side rails. Find our points, and find the proper configuration, too, that works best for your vehicle. We'll get these finger tightened first. Then we use the tightening tool and finish them off.Now we can take our bar and set it into place as well, making sure that they're open all the way. We'll set them into our cradles. Our landing pads, I should say. And then we'll get the crossbar overhang figured out as well. You're going to want to make sure that that's even on both sides. Have to loosen it up just a little bit. And try not to do that. There we go. All right, that looks good. Our final step is to tighten down the bolt in the center here. This is going to tighten up the tower to our bar. That's done. Close this up, and that'll lock it to the landing pad, and repeat this on the driver's side as well.Next, I'm going to give you a couple quick measurements here that'll help you out in regards to the height that it's going to add to your vehicle. We're going to start in the center of the roof and measure to the bottom and the top of the bar. From the center to the bottom, it's going to be about five inches. From the center to the top, it's going to be about five and seven eighths inches, so that's adding quite a bit to the top of your roof, so keep that in mind when you have your bike racks and your cargo baskets fully loaded when you're pulling it into your garage. And this roof rack system does have 165 pounds of carrying capacity once installed, but you always want to double check with your vehicle's manual and go by its recommendations, and go by the smaller of the two numbers. And there you have it for the Yakima JetStream roof rack system on our 2017 Honda CR-V.
Customer Reviews
Custom Fit Roof Rack Kit With Y00228 | Y00425 | Y53TR - Y84TB
Average Customer Rating: 4.8 out of 5 stars (218 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: John11/16/2023
Mazda
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze.
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Aidan08/19/2023
2012 Toyota Prius
Great bars and easy installation on my 2012 Prius C
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Kevin 11/14/2023
not installed yet but everything was delivered on time and in good condition
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Steven 10/16/2023
Great product. Great service.
by: Porfirio10/26/2023
very informative and great work
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Ernesto07/23/2022
Nissan Rogue
Well you asked for it so;
I ordered this as part of my roof rack for a 2021 Nissan rogue. The complete roof rack set was unavailable le as one bracket was on back order and said would ship in under a month so I ordered everything else in the meantime. Little did I know it would take a over a year to get one stupid bracket and yes, I'm still waiting. I can't even return the items I bought because it's way past the 90 day policy even though they're brand new still in the box collecting dust. etrailer, this has been the worst experience I've had yet with you guys. Oh still waiting for my one bracket to complete my roof rack
by: JB02/13/2022
The rack system seems very good, but time will tell, of course. The installation is difficult and time consuming. I purchased the system needed from etrailer website with guaranteed to fit pieces. I would call myself a very experienced do-it-yourselfer. I followed directions slowly, carefully, and exactly, yet there were problems. The video for installation given for my exact order did not match the printed and actual assembly and installation directions. The baseclips that were guaranteed for my model vehicle were actually for a different model vehicle according to the enclosed sheet ... however they did work anyway but caused some "looking up" and some confusion during assembly. I was careful to assemble exactly to measurements given ... and once that is all done and tightened and "sealed up" you put them on the roof, only to find that they could have been spaced a bit wider for a perfect fit. They are fine enough and we'll see if they stay tight to the vehicle. If not will need to take it all apart and widen the spacing.
It is excellent that basically only one tool that is provided with the racks is needed. And also that each part must "click" when properly tightened. That adds reassurance and satisfaction while assembling.
There are so many models of vehicles and it is not easy to figure all this out. etrailer has a very helpful website, response, and videos to help ... but my review is to emphasize that the instructions are not perfect. One needs lots of patience, common sense, and perhaps re-assembly for a perfect outcome.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Robert10/05/2018
These bars are outstanding. They were purchased for a Jeep grand cherokee '18. I had previously purchased from another brand, but the whistle noise was constant and very noticeable. These are completely quiet, I am glad I changed to the yakima bars. Installation was also much easier, and more "flush" mounting with the yakima brand. Glad to do business with etrailer!
by: William06/16/2021
The Yakima roof rack came in and was super easy to install. Appreciate the etrailer videos offering ways to install the racks.
by: Kp05/20/2021
End caps came off but love the bars. Get an extra set just in case. My Yakima cargo box is nice and safe attached to it.
by: Robert05/21/2021
Great design for a roof rack system.easy to put on and take off. Use it to carry 9-11 foot surf fishing rods. Takes two minutes to put on when I am ready to go fishing.
25
649
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Will the Malone DownLoader Fit on Yakima Roof Rack CrossbarsYes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
view full answer... - Best Options to Carry a Kayak and 2 Bikes with a 2018 Kia OptimaThe best way to transport a kayak and 2 bikes with your 2018 Kia Optima is to use a hitch mount bike rack and then add a roof rack for carrying your kayak. You could potentially carry everything on your roof but the 165 lb max weight limit of a roof rack can easily be exceeded depending on what bikes and kayak you have. The trailer hitch I recommend using is the Class I Draw-Tite Sportframe # 24965 because it doesn't require the use of a support strap for non-trailer loads like the Curt...
view full answer... - Does the Rhino-Rack 2500 Roof Rack # DS118B Fit My 2013 GMC Terrain?From your recent searches, it looks like you are asking for the compatibility of the Rhino-Rack 2500 Roof Rack - Square Crossbars - Naked Roofs or Fixed Mounting Points - 46" Long on your GMC Terrain. Unfortunately, this roof rack does not fit your vehicle. With that being said, we do have some great compatible roof rack systems that do fit. The fitment that you need depends on if your vehicle has a bare roof or raised factory rails. If you have bare roof on your 2013 GMC Terrain, I...
view full answer... - What Replacement Yakima Q Tower Components do You Carry for My 2013 Toyota Camry?I have a solution for you. Unfortunately, the systems that involve the Yakima Q Towers like # Y8880047 were discontinued by Yakima on your bare roof 2013 Toyota Camry. However, if you are looking for the discontinued part numbers that went with the towers for your vehicle, those were the Q Clips - Q5 8000605 and the Q Clips - Q116 8000716. This system fit Yakima RoundBars like the # Y00408. We unfortunately do not have a current Yakima crossbar setup for your vehicle that uses Yakima RoundBars....
view full answer... - Can I Carry ~150lb Boat On The Roof Of My 2017 Ford Edge With No Rails And A Panoramic RoofYou are right to be concerned about the weight limit on your 2017 Ford Edge if you will be carrying a boat that heavy. The lightest roof rack I found weighs 13lbs. It would be the 2017 Ford Edge Roof Rack by Rhino Rack. I am guessing that while your boat is less than 150lbs it comes very close to that weight. This rack is rated to carry 165lbs and your boat and the aftermarket roof rack is almost at the weight limit of your rack and that is without the weight of the your boat carrier. I...
view full answer... - Recommended Yakima Roof Rack, Cargo Box, and Bike Rack for a 2017 Kia SorentoI have great recommendations for each of your searches! To use one key, you will need to have the same brand. For the roof rack on your 2017 Kia Sorento, all of the roof racks have a 165-lb capacity. So, I recommend the Yakima JetStream Crossbars, part # Y00425. They're aerodynamic and fit to the rails by means of the RidgeLine Towers, part # Y00145, and the RidgeClip Fit Kit, part # Y06013. For the cargo box, I recommend the Yakima CBX Rooftop Cargo Box, part # Y86FR. It has 18 cubic...
view full answer... - 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - Long Crossbar Roof Rack for 2017 Honda HR-V to Install Thule Hullavator Assisted Kayak CarrierThe Thule Hullavator part # TH898 can fit aftermarket roof racks like the Rhino Rack you have but the bars of the rack have to stick out past the feet of the rack 4 to 8 inches. If you need a longer crossbar roof rack the longest option we have is the Yakima JetStream bars # Y00425, # Y00145 and # Y06023 which will give you 60 inch long crossbars. To add locks you'd need just the part # Y07204.
view full answer... - Recommended Roof Rack for 2017 Lincoln MKZThe roof rack I recommend for a 2017 Lincoln MKZ is the Yakima JetStream Crossbar System which consist of part # Y00425, part # Y28TR, part # Y06110, and part # Y06102. This is an aero bar system which works great with most wrap-around style rooftop mounted accessories but can also be used with channel mounted accessories due to the integrated channels. The aero bar design also makes for the least amount of wind noise and best possible mpg's. Please note, modes with panoramic roofs are...
view full answer... - Are Whispbar Roof Rack Parts Available for 2022 Lexus RX 350At this time (June 2022) we have a few residual Whispbar fit kits left but nothing for your 2022 Lexus RX 350. Yakima ended up discontinuing that line of roof rack back in 2016 so we'll need to get you a new roof rack altogether for your new vehicle and for that I recommend checking out the JetStream roof rack system: 50" JetStream Crossbars - # Y00425 RidgeLine Towers - # Y00145 RidgeClip Fit Kit - # Y06027 Lock Core Kit - # Y07204 If you let me know what you plan on using the roof rack...
view full answer... - Recommended Crossbars for a Roof Rack on a 2024 Subaru Crosstrek Wilderness w/ Raised Roof Rails To attach a set of crossbars to the raised rails on the roof of your 2024 Subaru Crosstrek Wilderness, I recommend the roof rack by Yakima which includes the following parts Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the...
view full answer... - Recommended Crossbars for a Roof Rack on a 2024 Subaru Outback Wilderness w/ Raised Roof Rails To attach a set of crossbars to the raised rails on the roof of your 2024 Subaru Outback Wilderness, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk...
view full answer... - Will the Thule Hullavator Fit on a Yakima Roof Rack?As far as the Thule Hullavator # TH898, it will attach to most styles of Yakima crossbars (for example, the JetStream crossbars # Y00425, the Round Bars # Y00409, and the CoreBars # Y00422). However, you need additional components to mount Yakima crossbars to your roof. In order to give you a complete system, please respond to this answer with the year/make/model of your vehicle. Also, something else needs to be considered. In order for the Hullavator to function, there needs to be at...
view full answer...
- Assisted Kayak Carrier Recommendation to Fit Roof Rack that Attaches to Door JambsThe Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 does not fit roof racks that attach to door jambs like you have but I have a great solution for a similar rack that will work. For that you'd want the Thule Hullavator part # TH898 which does not have this fit exclusion and does have assisted loading.
view full answer... - Roof Rack and Cargo Box Recommendation for 2020 BMW X3I recommend going with the Yakima JetStream roof rack setup for your 2020 BMW X3 along with a Yakima cargo box. Not only does the JetStream system look great, but the feet has small adjustments in them that give you the best fit possible! For this system you need 50" JetStream Crossbars # Y00425, along with the RidgeLine Towers # Y00145, and Fit Kit # Y06031. Then according to my research you can add any of the linked Yakima cargo boxes to your roof! I recommend the SkyBox NX 16 # Y95AV...
view full answer... - Will Thule Force XT XXL Fit a 2020 Subaru ForesterYes, the Thule Force XT XXL # TH6359B will fit and work great on your 2020 Subaru Forester. If you don't have the factory roof rack then you'll also need a roof rack kit - for that I recommend the Yakima JetStream system because it has some adjustments in the legs that make them so that the crossbars are exactly level. Naked Roof 50" Yakima JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 22 - # Y00248 Locks Cores - # Y07204 (optional) Raised Rails 50" Yakima JetStream...
view full answer... - Best Roof Rack for 2018 Toyota Sienna for Thule Hullavator Kayak CarrierThe best roof rack for your 2018 Toyota Sienna is from Thule, as the Curt Roof Rack # C18118 has somewhat oddly shaped bars, and it isn't compatible with the Thule Hullavator Pro Kayak Carrier # TH898. You're right that the Yakima rack is pricier, but it is also a much higher quality rack, is going to be compatible with more accessories than the Curt (like the Hullavator), and will have the distance needed over the edge of your Sienna's raised rails to use the Hullavator. The Yakima rack...
view full answer... - Roof Rack Recommendation for a 2021 Toyota RAV4 with Flush Rails and Moonroof ClearanceFor your application I recommend installing the Yakima JetStream roof rack on your 2021 Toyota RAV4 with flush rails: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 23 - # Y98FR You honestly shouldn't have any clearance issues with any roof rack when it comes to the moonroof, but the Yakima towers tend to sit on the higher end so you'll get as much clearance as possible. Most roof rack manufacturers don't recommend opening up a sun/moonroof with the roof...
view full answer... - Recommended Tonneau Cover with Rails for 2019 Ford Ranger For Kayak or SUP TransportFor your 2019 Ford Ranger I recommend the Pace Edwards UltraGroove Metal Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KMFA31A62 for a 6 foot bed or # 311-KMFA30A61 for a 5 foot bed. The The T-tracks on the UltraGroove are designed to work with roof rack crossbars and other accessories. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00425 along with the Landing Pad # Y00221 and Towers # Y53TR to attach them to the tracks. If...
view full answer... - Which Parts Can I Reuse From 2004 Mini Cooper Thule Roof Rack On 2018 Mini Cooper 2 Door The only piece that you can reuse from your original setup on the 2004 Mini cooper are the Thule WingBar EVO crossbars if the new 2018 Mini Cooper 2 door has flush mount rails. You can use the original bars part # TH711200 with Thule Rapid Podium Foot Pack part # TH460R and fit kit part # THKIT4020. If the new 2018 Mini Cooper does not have flush mount rails, then you would need to go with another brand because Thule does not make a roof rack that fits the naked roof of the 2018 Mini Cooper...
view full answer... - Does The Rola Rail Extreme Work With My 2019 Honda CR-V With A Naked Roof?The Rola Rail Extreme # R4002 comes with just the rails, so they will not work. In the product title you may have read "Flush Rise Rails" thinking it came with it. What that means is that the Rola Rail Extreme will mount to the flush side rails. These rails will not work with your Naked Roofed Honda CR-V but will work with most vehicles with raised side rails that are less that 47" apart. To get a roof rack on your 2019 Honda CR-V I recommend the following Yakima JetStream Crossbars:...
view full answer... - Roof Rack Options for a 2016 Volkswagen GTI 5-Door HatchbackThe Thule 400 roof rack foot pack was discontinued almost 20 years ago. Unfortunately it's obsolete and no currently available clamp kit would be compatible with it. There is an available new rack that's a fit, which would consist of the following parts for vehicles with a bare roof: • For a Square Crossbar, use # TH712400. Aero style crossbars are available in black as part # TH711420 or silver as part # TH711400. • Evo Clamp Feet, part # TH710501 • Vehicle Specific Fit Kit...
view full answer... - Recommended Trailer Hitch Receiver for 2015 Lexus IS 250 for a Bike Rack and Light TrailerI recommend the Draw-Tite trailer hitch receiver, part # 24923, for your 2015 Lexus IS 250. It's confirmed to fit both the sedan or convertible models. The hitch is a Class I, 1-1/4 inch receiver so you need to make sure the bike rack you use fits the Class I. The bike rack I recommend is the very popular Thule T2 Pro XTR, part # TH23JV. The T2 is a platfrom rack that carries up to 2 bikes at 50 pounds each. it can be folded up out of the way when you're not using it as well as tilted...
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer...
- Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-TowersThe aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
view full answer... - Roof Rack That Fits 2012 GMC Yukon Denali with Flush Roof RailsOkay so Yakima does offer a roof rack that fits the unique Denali flush rails of your 2012 GMC Yukon with the part numbers # Y00426, # Y53TR, and # Y00246 for their JetStream bar setup. Thule at this time does not have a fit for the Denali versions of your vehicle. The fit kit of this rack does use a channel nut that slips into the channels you mentioned having on the flush bars.
view full answer... - Roof Rack For Thule Tepui Tent on 2018 Jeep Compass TrailhawkIt's always a tough question to answer when you're a company that specializes in roof racks as the liability of the setup could get them in trouble. That being said, it can be done but they are probably concerned with the manufactures weight capacity of the roof on your 2018 Jeep Compass. All I can do is give you the heaviest duty rack and it's up to you to make sure your compass can handle the weight. I would get the Yakima HD bars # Y01156 which are extremely strong. You'll need the...
view full answer... - Roof Rack for 2023 Chevy Bolt EUV for 2 SurfboardsThe Yakima Corebar roof rack part numbers # Y00421, # Y53TR, # Y00245 would be a great roof rack for your 2023 Chevy Bolt EUV to carry two surf boards with a carrier like the Inno Board Locker Surfboard Carrier part # INA744 which can carry up to two boards.
view full answer... - Length of Crossbars Needed on ARE Cap for Thule Hullavator & Motion XT Cargo BoxYou can mount the Thule Motion XT Rooftop Cargo Box # TH629806 and Thule Hullavator Pro Kayak Carrier # TH898 on your Tacoma's ARE truck cap with Yakima tracks, but the 60 inch bars aren't wide enough. The Motion XT is 36" wide and the Hullavator takes up 28-1/2" of crossbar space so there isn't quite enough room for both to fit comfortably. What you will need instead are the 70" crossbars, the Yakima JetStream Crossbars 70" Long - # Y00427. Since you already have the tracks, the other...
view full answer... - What Crossbars Allow Me to Use the Hullavator # TH711420 on My 2022 RAV4 with Flush Rails?I recommend looking at the Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156, which also requires Towers # Y53TR, Adapter # Y03541, and Landing Pads # Y98FR. This will fit your 2022 Rav4 with flush factory rails and should give you 4" of crossbar overhang on each side to use the Hullavator. One way you can tell for sure is by measuring from mounting point to mounting point on your roof. If that measurement does not exceed 47 inches, the Hullavator will have enough length.
view full answer... - 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier RecommendationFor a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
view full answer...
- 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - How Can I Use My Old Yakima Crossbars On My 2020 Jeep Grand CherokeeIf you want to use your old Yakima crossbars on your 2020 Jeep Grand Cherokee with flush rails, your options will depend on what crossbars you have and the raised rails on your vehicle. Your first option will work on Jeep Grand Cherokees with the E-Group Package. If you have the old Yakima round bars, they must be at least 50" in length. This rack will consist of the following items: Your Yakima round crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails,...
view full answer... - Recommended Crossbars for a Roof Rack on a 2024 Subaru Crosstrek Wilderness w/ Raised Roof Rails To attach a set of crossbars to the raised rails on the roof of your 2024 Subaru Crosstrek Wilderness, I recommend the roof rack by Yakima which includes the following parts Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 item # Y00248 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the...
view full answer... - Roof Rack with 60-Inch Crossbars for 2017 Chevy Suburban with Flush Roof Side RailsThe Rola Sport REX Series Roof Rack 59685 is a confirmed fit for your 2017 Chevrolet Suburban but this rack comes as a complete kit and no other lengths of bars are available. If you prefer a longer roof rack crossbar in the 60-inch size we do have options that are displayed on the linked page. Like the Rola rack, all of these Thule and Yakima options feature aero-style crossbars that are quieter than other bar types. The most cost-effective choice is the Yakima Core Bar/Skyline rack...
view full answer... - Can I Use The Thule Hullavator On Factory Crossbars With No Overhang?The Thule Hullavator # TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that have some overhang. Since your 2023 Subaru Outback already has the factory installed rails running front to back, you will be able to mount crossbars using these rails. I recommend the Yakima JetStream Roof Rack, which will consist of the following parts: Yakima...
view full answer... - Will Thule Force XT XXL Fit a 2020 Subaru ForesterYes, the Thule Force XT XXL # TH6359B will fit and work great on your 2020 Subaru Forester. If you don't have the factory roof rack then you'll also need a roof rack kit - for that I recommend the Yakima JetStream system because it has some adjustments in the legs that make them so that the crossbars are exactly level. Naked Roof 50" Yakima JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 22 - # Y00248 Locks Cores - # Y07204 (optional) Raised Rails 50" Yakima JetStream...
view full answer... - Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra GrooveI believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
view full answer... - Can Two Thule Hullavators Be Used On A 2021 Toyota RAV4?I have a different kayak carrier option for you, but the Thule Hullavator # TH898 you mentioned are 36" long each and while a bit of them will hang over the end of the crossbars the longest crossbars available for your 2021 Toyota RAV4 are 55" so you will not have enough room. Instead I recommend going with the Hullavator on one side of the vehicle, and a standard carrier such as the Malone SeaWing W/Load Assist # MPG113MD one the other side as it is much lighter and quite a bit narrower. The...
view full answer... - How To Mount The Yakima HD Cross Bars On A 2018 Subaru Outback WagonTo add the Yakima HD cross bars to the existing roof rails on your 2018 Subaru Outback wagon. I don't suggest making holes in the roof rails. We cannot provide the information to install them in that manner. I recommend using the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 Item # Y03541 the Landing Pad 15 for Yakima Control Towers - Qty 4 Item # Y00241 and the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track...
view full answer... - Widest Crossbar Spread Roof Rack Solution for 2017 Subaru OutbackI can understand wanting to have a larger spread between the crossbars, especially if you're carrying things like canoes and kayaks and don't want to have large amounts of the boats hanging off of either end of the bars. The issue isn't so much the roof rack kits like the # Y53TR with # Y00241 and # Y00421 , as it is the mounting points available on your 2017 Subaru Outback. The Yakima roof rack kit mentioned above has the largest recommended spread of any of the crossbars that we offer-...
view full answer...
- Roof Rack Recommendation for a 2021 Toyota RAV4 with Flush Rails and Moonroof ClearanceFor your application I recommend installing the Yakima JetStream roof rack on your 2021 Toyota RAV4 with flush rails: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 23 - # Y98FR You honestly shouldn't have any clearance issues with any roof rack when it comes to the moonroof, but the Yakima towers tend to sit on the higher end so you'll get as much clearance as possible. Most roof rack manufacturers don't recommend opening up a sun/moonroof with the roof...
view full answer... - Recommended Tonneau Cover with Rails for 2019 Ford Ranger For Kayak or SUP TransportFor your 2019 Ford Ranger I recommend the Pace Edwards UltraGroove Metal Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KMFA31A62 for a 6 foot bed or # 311-KMFA30A61 for a 5 foot bed. The The T-tracks on the UltraGroove are designed to work with roof rack crossbars and other accessories. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00425 along with the Landing Pad # Y00221 and Towers # Y53TR to attach them to the tracks. If...
view full answer... - Largest Roof Rack Recommendation for a 2016 Subaru OutbackIf you install the Yakima SkyLine Towers, # Y53TR, along with the Round Bar Adapter, # Y03536, and the Landing Pad, # Y00241, then you can install any length of the Yakima round crossbars that you wish. Yakima has a 78 inch crossbars, # Y00411, 66 inch crossbars, # Y00410, 58 inch crossbars, # Y00409, and 48 inch crossbars, # Y00408. It is okay to cut them down to a custom length as well if you feel like one is too long once it is installed. There are a few things to keep in mind. First,...
view full answer... - Thule Hullavator Kayak Carrier Mounting RequirementsTo install Thule's load-assist Hullavator kayak carrier # TH898 on a vehicle's roof rack the ends of the bars must extend out past the roof rack feet by at least 4-inches. You can see this requirement illustrated in the linked diagram. The comparable Yakima ShowDown carrier # Y04081 also has a similar bar space requirement. If your roof rack is a Subaru factory type whose bars do not extend past the rack feet/rails then you can still use the Hullavator but you'll need to add a different...
view full answer...
- Yakima Roof Rack Fitment on a 2013 Jeep Grand Cherokee OverlandI can help you find the right Yakima roof rack for your 2013 Jeep Grand Cherokee Overland. If your Overland has the E group package you will see a metal strip in the flush mounted rails, the Yakima kit you will need is the # Y00408 in combination with # Y53TR, # Y03536, and # Y00244. This kit will include the round crossbars, the RailGrab Towers, and the Raised Side Rail adapters. If your Overland doesn't have the E group it will have a black plastic rail and the Yakima kit you will need...
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer... - Can 60 Inch Yakima CoreBar Roof Rack Be Used on 2021 Mazda 3You can indeed use the longer 60 inch Yakima CoreBar crossbars. To equip your 2021 Mazda 3 with a Yakima CoreBar roof rack, you'd need the following: • Yakima 60 Inch CoreBar, part # Y00422 • Yakima SkyLine towers, part # Y53TR • Yakima Landing Pad 22, part # Y00248 which attaches towers to existing mounting points on vehicle roof. I'll link to some product videos that you might find helpful.
view full answer... - Parts Needed to Install Yakima Round Crossbars on a 2006 Honda CR-VThe Yakima RailRiders are a very old style of roof rack that hasn't been around in a long enough time that there are no landing pad or any fit info available. If you have a set of round Yakima crossbars like the part # Y00408 you can reuse them but you have to go with the current Yakima towers etc. For that you'd also need the part numbers # Y53TR, # Y03536, and # Y00228.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Recommended Roof Rack System For Yakima Round Bars On 2006 Honda CR-VI reached out to my contact at Yakima and there are not Q clips available for your 2006 Honda CR-V so your Q towers will not be compatible. That model has fixed points in the roof and so their recommendation is the Skyline Towers # Y53TR and Landing pads # Y00228 which you will need a quantity of 2 kits for 4 pads total. To use these with round bars like you have, you will also need the round bar adapter # Y03536. Their recommended cross bar length for this rack on your vehicle is 48...
view full answer... - Parts Needed to Transfer Yakima Round Crossbars from 2006 to 2010 Honda CR-V The correct Round CrossBars for Yakima Roof Rack System for a 2010 Honda CR-V consists of part # Y00408, part # Y53TR, part # Y03536, and part # Y00228. It looks like you already have the crossbars but everything else would need to be replaced (part # Y53TR, part # Y03536, part # Y00228). The design of the mounting feet has changed so you will need to update yours to the new style. The mounting feet come with a tool you can use to remove the old and install the new.
view full answer...
- Can Parts of Yakima Round Bar Roof Rack Be Reused on 2005 Honda CR-V or Toyota HighlanderAs long as the crossbars are in good condition, you can reuse the Round 48 Inch Crossbars for Yakima Roof Rack Systems # Y00408 on the 2005 Honda CR-V with naked roof. Yakima recommend the 58 Inch Round CrossBars for the 2005 Toyota Highlander, so I cannot guarantee that the 48 inch bars will fit correctly. Since you want to continue using the round crossbars, your FatCat EVO # Y03096 and Kayak Stacker # Y04036 will still fit to your roof rack for these 2 vehicles. To add the Yakima Round...
view full answer... - Roof Rack Needed to Carry Roof Box, Bike Rack, and Kayak on a 2006 Honda PilotOut of the Yakima and Thule options for the naked roof on your 2006 Honda CR-V I recommend going with Yakima. The Thule options have bars that end inside the foot packs. This gives the roof rack a great OEM look but minimizes the amount of crossbar space that can be used. To use a JetStream aero bar roof rack on your CR-V you will need the JetStream bars, part # Y00425, along with the SkyLine Towers # Y53TR, and the Landing Pad 8 # Y00228. If you would like to add locks to this roof rack...
view full answer... - Lubricant Use on Screw Threads of the Yakima Landing Pad 8 # Y00228I totally understand the concern! When it comes to manufacturer's guidelines, it is always recommended to go "by the book." This is because Yakima puts all of their parts like the Landing Pad 8 for Yakima SkyLine and Control Towers # Y00228 through strenuous physical testing. It is also important to note that not going by the recommendations may void any warranty on the roof rack. With that being said, you are absolutely correct that Yakima recommends using a non-water soluble lubricant...
view full answer... - Recommended Yakima Landing Pad Recommendation for 2002 Honda CR-VI checked with Yakima and for your 2002 Honda CR-V the recommended Landing Pad is the number 8 # Y00228.
view full answer... - Yakima Roof Rack Recommendation for 2004 Honda CR-V to Carry KayaksFor your 2004 Honda CR-V the correct parts needed to install a Yakima roof rack are # Y00408, # Y53TR, # Y03536, and # Y00228 which will give you a round bar roof rack. Once that's installed you'd be able to install a Yakima JayLow kayak carrier part # Y04073 which is a really solid option for a carrier. It is padded and can fold down when not in use plus is very easy to install and use.
view full answer... - Parts Needed to Install Yakima Round Crossbars on a 2006 Honda CR-VThe Yakima RailRiders are a very old style of roof rack that hasn't been around in a long enough time that there are no landing pad or any fit info available. If you have a set of round Yakima crossbars like the part # Y00408 you can reuse them but you have to go with the current Yakima towers etc. For that you'd also need the part numbers # Y53TR, # Y03536, and # Y00228.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Recommended Roof Rack System For Yakima Round Bars On 2006 Honda CR-VI reached out to my contact at Yakima and there are not Q clips available for your 2006 Honda CR-V so your Q towers will not be compatible. That model has fixed points in the roof and so their recommendation is the Skyline Towers # Y53TR and Landing pads # Y00228 which you will need a quantity of 2 kits for 4 pads total. To use these with round bars like you have, you will also need the round bar adapter # Y03536. Their recommended cross bar length for this rack on your vehicle is 48...
view full answer... - Parts Needed to Transfer Yakima Round Crossbars from 2006 to 2010 Honda CR-V The correct Round CrossBars for Yakima Roof Rack System for a 2010 Honda CR-V consists of part # Y00408, part # Y53TR, part # Y03536, and part # Y00228. It looks like you already have the crossbars but everything else would need to be replaced (part # Y53TR, part # Y03536, part # Y00228). The design of the mounting feet has changed so you will need to update yours to the new style. The mounting feet come with a tool you can use to remove the old and install the new.
view full answer... - Can Parts of Yakima Round Bar Roof Rack Be Reused on 2005 Honda CR-V or Toyota HighlanderAs long as the crossbars are in good condition, you can reuse the Round 48 Inch Crossbars for Yakima Roof Rack Systems # Y00408 on the 2005 Honda CR-V with naked roof. Yakima recommend the 58 Inch Round CrossBars for the 2005 Toyota Highlander, so I cannot guarantee that the 48 inch bars will fit correctly. Since you want to continue using the round crossbars, your FatCat EVO # Y03096 and Kayak Stacker # Y04036 will still fit to your roof rack for these 2 vehicles. To add the Yakima Round...
view full answer... - Roof Rack Needed to Carry Roof Box, Bike Rack, and Kayak on a 2006 Honda PilotOut of the Yakima and Thule options for the naked roof on your 2006 Honda CR-V I recommend going with Yakima. The Thule options have bars that end inside the foot packs. This gives the roof rack a great OEM look but minimizes the amount of crossbar space that can be used. To use a JetStream aero bar roof rack on your CR-V you will need the JetStream bars, part # Y00425, along with the SkyLine Towers # Y53TR, and the Landing Pad 8 # Y00228. If you would like to add locks to this roof rack...
view full answer... - Lubricant Use on Screw Threads of the Yakima Landing Pad 8 # Y00228I totally understand the concern! When it comes to manufacturer's guidelines, it is always recommended to go "by the book." This is because Yakima puts all of their parts like the Landing Pad 8 for Yakima SkyLine and Control Towers # Y00228 through strenuous physical testing. It is also important to note that not going by the recommendations may void any warranty on the roof rack. With that being said, you are absolutely correct that Yakima recommends using a non-water soluble lubricant...
view full answer... - Recommended Yakima Landing Pad Recommendation for 2002 Honda CR-VI checked with Yakima and for your 2002 Honda CR-V the recommended Landing Pad is the number 8 # Y00228.
view full answer... - Yakima Roof Rack Recommendation for 2004 Honda CR-V to Carry KayaksFor your 2004 Honda CR-V the correct parts needed to install a Yakima roof rack are # Y00408, # Y53TR, # Y03536, and # Y00228 which will give you a round bar roof rack. Once that's installed you'd be able to install a Yakima JayLow kayak carrier part # Y04073 which is a really solid option for a carrier. It is padded and can fold down when not in use plus is very easy to install and use.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.