To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.
Features:
Yakima 58" RoundBar MD:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2009 Ford Flex, well be test fitting the Yakima round bar roof racking system, part number Y00409, Y00731 and Y00124. Now with our Q towers, Q clips and round bars already assembled according to the instructions. Well begin our test fit by placing the front crossbar on to the front of the vehicle. Well then need to measure from the front part of the glass to the first part of the tower, as stated in to the instructions this measurement is 20 inches. Well measure this on both the passenger and driver side of the vehicle to make sure that the crossbar is perpendicular to the vehicle and the pads on the bottom of the Q towers can tour to the root line. Once weve established this position on to the roof, well then turn the silver balls on the interior of the tower, and then clamp down the black plastic caps to secure the towers to the vehicle.
Well then repeat this for both side of the vehicle. Now the front crossbar secure to the vehicle will place our rear crossbar onto the rear of the vehicle. Well then need to measure the crossbar spread. Now the crossbar spread is the measurement from the center of the front crossbar to the center of the rear crossbar. And according to the instructions this measurement is 36 inches.
Well measure this on both the passenger and driver side of the vehicle and assuring that both crossbars are parallel to each other and perpendicular to the vehicle. As measurement is important when choosing roof racking accessories. Once weve established this position to our rear crossbar, well again tighten on the silver balls in the inside of the tower and then clamp down the black berserk levers securing the crossbar to the vehicle. Now the roof racking system is assembled and secured to the vehicle, were ready to load up some accessories. And that completes todays test fit for the Yakima round bar roof racking system, part numbers Y00409, Y00731 and Y00124 on our 2009 Ford Flex..
Average Customer Rating: 4.8 out of 5 stars (246 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
Works perfectly. I am always impressed that Yakima continues to make parts for the "old roundbars" since they have since moved on to the superior JetStream bars.
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs!
As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you!
A great company to do business with, and lots of merchandise in stock. I orderd a roof rack for my truck on Tuesday morning and it was on the porch when I returned from work on Thursday. I will deffinitely order more from etrailer.com
Excellent selection of rack parts. Very useful installation videos help when choosing between products. Easy ordering process. Quick delivery.
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
necessary for using the widest cross bar option (78"). East to install
You guys provide great products and excellent customer service.
Thanks
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
I have been using Yakima racks for around 40 years and have never had any problems. However, I am amazed at the price increases over the years. Etrailer prices were by far lower than most. Overall, a very excellent purchase.
The rack has been so useful since I purchased it. Staff at etrailer.com were exceptionally helpful in getting the best option for my car and answering questions. I recommend this company, for its 110% customer service, excellent prices and timely delivery.
Haven’t used them yet but they should work as expected
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
Great company. Fast delivery.
Kit worked perfectly on my 2021 Subaru Forester. The whole install took 30 minutes. Never been disappointed with etrailer.
Great service - great price
Great service - great price
Yakima Crossbars were as you would expect - steel bars coated in a soft black coating (be mindful when you are utilizing these with the top mounts as the clamp will eat through the soft coating when you tighten them down). I had issues with my yakima round bar setup as the brackets and tower system were allowing water to leak in. This is in no way reflective of what youll experience but Yakima has superb support. I spoke with them twice on my issue and out of their kindness they shipped me an entire setup to replace my existing one for free.
Product works as advertised thus far. When you buy the yakima towers, you are required to purchase these as well to fit the rounder bars (I feel sure there are other adapters for other bar shapes). These should have come with the towers in my opinion, and I resented having to shell out more $$ to purchase these "must have" adapters to mount my bars. 3 star overall rating based on function, price. Delivery and packaging was top-notch through etrailer.
I ordered a Yakima Roof Rack for my Toyota Prius from eTrailer.com. Part of the reason for purchasing from eTrailer.com was the promise that the racks were made specifically for the car and would not dent the roof.
I received the rack on July 31, and installed the racks on my Prius according to instructions included with the racks. Our tandem kayak is 65 lbs . The towers were placed on the outer most part of the roof as indicated by the instructions. Yakima saddles were attached to the crossbars to hold the kayak. Nothing was close or touching the top of the roof. We transported the kayak to a nearby lake, 6 miles, and back. The next day we removed the racks from the roof and noticed 4 dents on the top of the roof. It was obvious that transporting the kayak on the rack caused the dents.
We had to pay $100 to have the dents removed from the Prius roof.
I cannot continue to use this rack that puts dents in the car's roof. I was extremely disappointed in the racks. In reading the Toyota manual and contacting them by phone, there is no mention of using or not using roof racks.
I was shocked to learn from Rachel at eTrailer.com that your company takes absolutely no responsibility for this Yakima product they sell. The best they can do is to pass the buck and refer us to Yakima.
Very disappointed, and out a lot of money for a product that damages your car. Will not recommend or buy here again. eTrailer.com does not even deserve one star in this review.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.