Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Bars
Item # Y02-490B
Retail:$544.37
Our Price: $485.70
You Save: $58.67
Confirmed to Fit
2011 Chevrolet Colorado
Crew Cab
Extended Cab
Regular Cab
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (3278)
- Q & A (0)
- Photos
2011 Chevrolet Colorado - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Bars
- Camper Shell Systems
- Aero Bars
- Rhino Rack
- Black
- Overhang
Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.
Features:
- Adjustable roof-rack system lets you carry gear on camper shells, hard tonneaus, or hardtop resin roofs without headliners
- 2 RTC-style tracks with dual C-channels provide adjustable mounting points for roof-rack legs
- Tracks mount to your vehicle roof with T-bolts - some drilling required
- Stainless steel construction with an anti-corrosion coating
- Endcaps provide finished look for the tracks
- 4 Quick Mount legs mount in the channels of tracks to create mounting points for crossbars
- Durable, glass-reinforced nylon construction
- Quick-release trigger system allows for easy, tool-free installation
- Squeeze internal triggers to release legs from bases
- Slide triggers apart to secure legs to bases
- Bases remain mounted to tracks
- Locks in covers let you secure the system to your vehicle
- Pivoting bases offer 33 degrees of adjustment to help level crossbars
- Precision-molded inserts cover bases when the legs are removed
- 2 Vortex Aero black, elliptical crossbars hold ladder racks, conduit cases and other work accessories
- Bars mount to roof-rack legs using built-in channels on bottoms of bars
- Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability
- Built-in C-channel on top of each bar lets you mount Rhino-Rack accessories and carriers
- Rubber strips in the channels help to cushion load and provide slip resistance
- Can be cut to accommodate track-mounted accessories and carriers
Specs:
- Weight capacity: 220 lbs
- Always observe your vehicle's maximum roof load capacity
- Track length: 63"
- Crossbar dimensions: 59" long x 3-1/2" wide x 1-1/2" tall
- Bolt length: 1-3/8"
- Leg height: 3"
- Limited lifetime warranty
The bases of these Rhino Rack legs easily mount into the included Rhino-Rack RTC-style roof rack tracks with included hardware. Just slide the nuts into the tracks, line up the mounting plates, and bolt the bases down. After this initial setup, you can leave the bases in the tracks.
Molded inserts help keep out dirt and provide a finished look when there are no legs and crossbars installed. To install a leg, simply remove the insert.
Once you've set up the bases, installing and removing your roof rack is easy. The Quick Mount legs have an integrated trigger system that creates an easy, tool-free installation.
To install a leg in a base, pinch and slide the internal triggers together.
Lower the leg onto the base and slide the internal triggers apart to secure the leg in the base.
Once the leg is installed in the base, replace the cover and lock it to help secure the system to your roof.
Y02-490B Rhino-Rack Roof Rack System w/ 2 Aero Crossbars - Track Mount - Black - 59" Long
Installation Details
Alternate Instructions
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 59" Bars - Y02-490B
Average Customer Rating: 4.7 out of 5 stars (3278 Customer Reviews)
Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.by: Bill L.06/19/2018
2016 Jeep Wrangler
I purchased this rack system for my 2016 Jeep Wrangler Willy's Wheeler edition - 2 door! There are lots of products out there that are listed for the 4 door but the two door model is more difficult to shop for.
The racks shipped immediately and were here in just a few days. All the parts were there, properly labeled and provided with clear instructions.
To properly fit my small roof, I took the two roof rails to a local machine shop and had them cut them to exactly 35.5". This allowed me to mount the tracks in the outermost groove on the roof and gave me the greatest possible length.
One problem that I had (and had predicted) is that the inside of the Jeep roof has a lip on the inside that interferes with the provided knobs seating properly against the inside of the roof. The local hardware store had no nuts (NOTHING) that would fit the threads of the provided T-Bolts. I ended up temporarily using solid metal spacers to fill the gap and allow me to tighten the provided knobs against the spacer which is against a rubber gasket and then the inner roof!
It worked! In the meantime, I will continue to search for some safety nuts that will fit the Rhino provided T-Bolts.
The rack looks great, is solid as a rock and easy to put on and remove! Now I can comfortably carry our kayaks and/or paddle boards to the lake!
by: Matthew07/24/2023
2002 Ford F-250 Super Duty
The rack itself is really nice, but the QC on the packaging is lacking. Mine showed up missing 4 o-rings to seal the t bolts through the roof. And there was no included Security Allan wrench for the security bolts. So I had to go buy new hardware. For what this kit cost I should have had extras of these parts not had to go spend more money just so I could complete the install. So if you plan to or do purchase this or any Rhino-rack product I would suggest opening everything up well before you plan to install and verifying you have everything that is needed. Other wise the rack looks and works great.
by: Kevin 06/25/2022
Ford F-250 Super Duty
I installed this rack on my F-250 bed cap. The install went smooth. I did it completely by myself with a lot of ladder repositioning. Very happy with the quality of the rack. I’m able to get three full size bikes on top of the cap and free up a ton of cargo space for long trips with our travel trailer.
Kevin
6/28/2023
Still holding up strong. I store it inside in the winter. Re-installs in minutes
by: Andy04/18/2018
2012 Ford F-150
This Rhino Rack roof rack system worked out very well for me. I installed it myself and took my time doing it. The rack system will work great with my RTT. It's easy to adjust and looks great on truck.
For the installation, I decided to use a center line down the middle of my canopy (shell) as my reference point for all measurements. I simply identified the middle of the third brake light on the shell and the third brake light on the back of the cab. I then snapped a chalk line from those points to mark the middle of the canopy. This method worked out great and the rails are perfectly parallel to each other.
The folks at etrailer.com were especially helpful. I had a slight glitch with a minor part in the kit and Bill at e-trailer got it resolved very quickly. He even followed up by calling me directly to give me an update. Truly exceptional customer service. Thanks to all at etrailer. They will definitely get more of my business.
by: Dan Thompson10/05/2017
1998 Dodge Ram Pickup
The Rhino T-Load Hitch and Vortex Aero roof rack system are very well designed, strong and straightforward installations. We have a Hobie Tandem Island sailing kayak, 18.5' long and around 200 lbs. on the roof racks / T-hitch, it is very solid. The T-hitch assembled in 15 minutes. Had my neighbors, both engineers, not come over to "help" with the roof rack install it would have been done in an hour. Lesson learned, keep the software developers over in their yard during install, away from power tools, no drilling allowed. Rhino systems and support staff are outstanding. Definitely recommend these products and the company.
by: Ronnie03/07/2021
Bought this a few weeks ago and finally got around to installing it yesterday. Overall it is very easy to install. I assembled everything in my shop and set the rails about 1 inch wider that what I actually wanted them to be. Put the whole assembly on the roof the the camper shell and centered using a soft seamstress tape measure. Once centered I marked the holes, i then cut the rails down 3 inches and put it back on the roof. I am real OCD so everything was measured precise and equal. Once I was ready to drill holes I measured everything again and once I got up my nerve I drilled all 16 holes in the roof. I did not use the butyl supplied with the racks, instead I used windshield urethane ( I installed windshield in a previous life). I then lined everything up and installed the rails. Before screwing down I put some large D-rings in place and the tightened the lock nuts. The D-rings will allow me to hang things from them. Now I am just waiting to strap my surfboards to the top and head to the beach.
by: Tyler07/12/2022
2006 ToyotaTundra
My kit is missing the track leg base, cover, and all associated mounting hardware. Customer service cannot confirm expedited shipping for the missing parts. A little quality control goes a long way. I mounted the tracks in one afternoon, but will have to wait to mount the bars and my GEAR!
by: Larry05/02/2020
2011 Ford F-150
Well engineered and sturdy. Good Directions but I thought they were a little hard to follow. I used Blue painters tape to hold bottom rails in place and get squared up on topper. I liked the way the bottom rail attaches to the topper. Probably figure on an afternoon to install. Only negative is my topper is 63 inches. Bottom rails were 63 inches. The end plugs stuck out three inches overlap. I cut them off. To Make this work, you need perfect 90 degree corners. My topper has curves so could not come in exactly 15 mm (why Metric) from end. So could not attach end plugs as directed. This will work well with my Porta Bote.
by: Eric06/18/2021
This product was exactly what I was looking for and suited my needs perfectly. The whole system is very well made and you can tell they paid attention to detail and functionality. Shipping was extremely quick and it was in perfect condition when it arrived. I really appreciate the fact that it's easily adjustable and removable. It came with 3 sets of instructions due to the mix of components, but they were concise and clear with good illustration.
by: Mike09/22/2021
2007 Toyota Tacoma
UPS delivered package broken and all hardware missing ... some extra taping would have solved the problem ... Have a hold now on the cc billing ... Shipping dept needs some training ...
Sierra K.
10/4/2021
I apologize for the missing hardware. Customer Service will be reaching out.
by: Lee 05/22/2023
Perfect for our needs. We have two of these racks on our work trucks and are about to purchase a third. The best feature for us is that the cross bars can be removed and stored. We only need to use the racks for a couple handful of jobs a year, so being able to take the racks on & off easy is a big plus.
by: Evelio05/06/2021
2021 Chevrolet Colorado
It’s a great product nice and sturdy. I use it to clear out my pick ups trunk to hang my fishing rods on the bars gives me more room to put in the bed of the pick up. I use the ski carrier to Carry my rods it’s just awesome
by: Joe 09/06/2022
Very good product, I've had no issues with it.
Joe G.
9/7/2023
It has been a good year with no problems. The rack is in great shape and still easy to use.
Mike L.
10/31/2023
@JoeG We're glad to hear that your # Y02-490B Rhino-Rack camper shell rack is working well for you, thanks for getting back with us!!
by: Brett06/29/2018
2012 Chevrolet Silverado
Pretty easy to install with the excellent video provided. If you follow the video, it’s a breeze! Excellent product!
by: Tony 03/11/2023
Great rack! When compared to the bigger name brands this is a fantastic value!
by: John06/12/2022
We absolutely love this rack. I installed it myself on an ARE topper to carry my 2 kayaks. It does it very well. It was recommended by a guy that I had just met. He had the same feelings for it as I do now.
by: Tor08/24/2018
2017 ToyotaTundra
So far so good. I paid a professional (camper shell place) to install it and it took them a bit over an hour to do so. Looks great and I'm confident it will do the job. Whistling noise at speeds above 40 or so, but I have yet removed the crossbars - assuming it will be quieter when I do so.
Mike L.
8/25/2018
Any time equipment is installed on the top of a vehicle, a certain amount of wind noise is unavoidable. You can minimize this by ensuring that the rubber strips are fully in place on the top and bottom surface of the crossbars. If any of the channel is exposed, the crossbar will be noisier. A fairing like part # RRRF4 would also further minimize the noise-causing turbulence.
Helpful Links
by: rbw10/04/2022
Great roof rack. Solid mount. Relatively easy to lock and move if necessary (easier would sacrifice its strength)
by: Bryan D.07/24/2018
2015 GMC Sierra
Product is installed on 2015 GMC Sierra extended cab with a fiberglass A.R.E. bed cap (6.5' bed). System works well and the bars are strong and solid. The cross-bars and risers can be removed quickly and easily (with the proper key) leaving only the pads clamped in place on the rails. Cross-bars and risers can be installed on the pads very quickly. Installation was straightforward and easy, except for the rubber strips that fill the grooves in the crossbars - those were the most difficult part of the installation - to get those to seat correctly (so I lowered rating by 1 star).
by: Drew S.08/29/2017
Nice quality product and I like how it attaches to the vehicle. It was easy to install. The unexpected downside is, these racks are slightly large diameter than those by Yakima. I own 4 or 5 Yakima accessories that I just assumed would mount on these as well, but none of them fit and there don't seem to be any adapters that will work.
by: Jim02/07/2019
2015 Ford F-150
Rack is very high quality. Quiet ride at all speeds. Installation video extremely helpful. The only issue I encountered was that the mounting bolts were bearly long enough to get through thickness of truck cap. I had to remove plastic thumb nuts and use thin fender washers to make it work. Very stressful situation after drilling 12 holes in my cap! These bolts need to be longer to allow for different thickness in caps. Otherwise, very satisfied with this rack.
by: John08/23/2018
2017 Ford F-350 Super Duty
This may very well be a great product when it comes to its functionality, but the installation was fraught with problems. 1). There were two sets of instructions in box, but the materials list only applies to one of the sets of instructions. Thankfully I counted the hardware before I started drilling the holes. Unfortunately, I didn’t count the o-rings. First trip to the hardware store.
2). I finish drilling the holes and place the track onto my truck cap, get into the bed of the truck and start the t-nuts. And half of the t-nuts won’t thread onto the t-bolts. I look closely at the two t-nuts I have left over and notice casting slag literally covering most of the threads. Back to the hardware store for a thread die to clean the threads.
by: Gary05/25/2022
Good solid roofrack! I carry a 20 foot long sea kayak on it.Easy to install,works with all accessories from other rack systems. As good or better than Yakima, Thule ect.
by: Rick 09/13/2022
Fairly easy to install. Happy with the construction. Need to be careful aligning the 2 sides so they are exactly the same distance apart from front to back. 1/4" drill bit worked just fine.
by: Jaemin10/12/2021
2018 Toyota Tacoma
Great racks! I installed them directly onto the roof of my camper shell. The install is pretty easy if you're a decent handy man - I had to drill 16 holes, the hardest part was making sure the tracks were parallel. I put painters tape on the roof of the car and marked lines and holes on the tape. The racks cause a slight whistle while on the freeway but only noticeable because I was listening for it.
25
3139
Show More Reviews
See what our Experts say about this Rhino Rack Roof Rack
- Recommendation for Adding Crossbar System to Leer 750 Sport Fiberglass Tonneau Cover The best solution we have available to add a crossbar system to the Leer 750 Sport fiberglass tonneau cover on your Ford F-150 is with a rail system like the excellent Rhino-Rack # Y02-490B. The included 63" tracks will mount to the tonneau itself (drilling into the cover will be required) and will provide you with the mounting points for the (also included) Quick Mount Legs and 59" long crossbars. This will give you a durable rack with a 220 pound weight capacity and the tracks allow...
view full answer... - Truck Camper/Topper Roof Rack System for a 2011 Ford F150 Crew Cab with 5-1/2 Foot BedRhino Rack produces a full range of track kits that will work on your truck topper. You simply need to choose the length and color for the vehicle. All of these kits include a set of Rhino-Rack Vortex Aero crossbars that have c-channel mounts and are quick-slide to move forward and backwards along the rack as you need it. They are all inclusive and don't require additional parts. 54 inches long, part # Y02-480B 59 inches long, part # Y02-490B 65 inches long, part # Y02-500B There are...
view full answer... - Hitch for Bike Rack and Roof Rack for Kayak Carrier for 2003 Ford F-150The Curt hitch part # C13038 is a confirmed fit for your 2003 Ford F-150 and would be a great option for carrying hitch accessories like your bike rack. Then for a kayak carrier solution you'd want to go with a roof rack for the camper shell like with the Rhino Rack Aero Bar Roof Rack for Camper Shells part # Y02-490B and a kayak carrier like the # S512. I wouldn't recommend trying to use a hitch T-load bar with a bike rack in a single hitch.
view full answer... - How To Install Crossbars On Top of the Bed On a 2018 Toyota Tundra 5.5 Bed With Hard Fold CoverI have the perfect option for you to carry objects up over the bed with a hard fold tonneau cover installed on a 2018 Toyota Tundra 5.5' bed. If the tonneau cover installs inside the bed rails then the best option would be to use a stake pocket mounted ladder rack, the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4001666. If you were okay with drilling into the bed rails, you could install something like the Rhino-Rack Aero Bar Roof Rack part # Y02-490B.
view full answer... - Can Rhino-Rack Track Mount Roof Rack be Installed on Bed Rails of 2015 Ford F-250For your 2015 Ford F-250 I recommend going with the longer Rhino-Rack Roof Rack System # Y02-500B that includes 65 inch crossbars. These bars will reach across the width of your Ford's bed and also provide just a bit of overhang to better accommodate wider loads. You can indeed mount this system directly to your truck's bed rails. Mounting the tracks to the rails will require some drilling but it's going to provide you with an extremely nice, adjustable rack with a 220 pound weight capacity....
view full answer...
- Roof Rack with Tracks Recommendation for 2007 Mercedes SprinterWe have the Rhino Rack Roof Rack part numbers # Y02-490B which is a roof rack with track kit that could be made to fit your 2007 Mercedes Sprinter. The tracks included are 63 inches long and the bars are 59. This would be a universal style fit though so it would require some drilling into the roof of your vehicle.
view full answer... - Recommended Truck Cap Roof Rack to Carry Kayaks with a 2008 Chevy SilveradoOne of the most popular truck cap ladder/roof racks that we currently have for your 2008 Chevrolet Silverado is the Rhino-Rack Roof Rack System # Y02-490B. This comes with two Black 59" aero style crossbars that install on legs that can slide back and forth in the included track. These bars have a weight capacity of 220 lbs (or the weight capacity of your cap if it is lower) and can accommodate a wide variety of accessories. To carry your kayaks I recommend using the Rhino-Rack J-Style...
view full answer... - Cost Efficient Solution for Transporting 2 Kayaks on Roof of Ram Truck CapThe most cost efficient way to safely transport your 2 kayaks on the camper shell of your 2015 Ram is to use a set of truck cap crossbars and two of the Malone Kayak Carriers # MPG154. These are durable foam blocks that simply wrap around the crossbars to support a loaded kayak. Tie-down straps are also included to secure them into place. For the roof rack system itself I recommend the Rhino-Rack # Y02-490B that features tracks that get permanently installed on the cap (drilling is required)...
view full answer... - Attaching Roof Mounted Cargo Basket to Topper of 2006 Chevrolet SilveradoTo attach a cargo basket such as the Curt Roof Mounted Cargo Basket, # C18115 (41-1/2" x 37") to a truck topper on your 2006 Chevrolet Silverado, you will need to install Rhino Rack Roof Rack, # Y02-490B. This roof rack is designed to attach to camper shells and tonneau covers and will need to be drilled into your Leer topper. Otherwise you will need to custom fit mounting hardware for the Roof Mounted Cargo Basket, # C18115 (41-1/2" x 37") or the longer # C18115-117 (64-1/2" x 39").
view full answer... - Can the Track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells Be Trimmed for a 5' BedThe track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B can be cut down to the size you need. But, the crossbars cannot be cut. That being said, you should not need to trim down the crossbars. It is also important to note that the wider slot on whichever end is trimmed will be gone, so installation and removal of the crossbars would need to be from the untrimmed edge. You could also use the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT (59") with shorter tracks,...
view full answer... - Roof Rack System to Carry a Kayak and Two Bikes on a 2010 Toyota Tundra with a Truck Bed ShellI recommend installing the Rhino-Rack Vortex Roof Rack System onto your 2010 Toyota Tacoma's camper shell. It's a track mount system that comes in black, # Y02-490B. Once you have the roof rack installed you can use the Rhino-Rack Kayak Carrier # S512 for the kayak. This carrier folds down when not in use. Add the Malone QuickLash Hood Loops # MPG308 to make it easier to secure the bow and stern. Then I recommend 2 of the Thule UpRide # TH599000 for the bikes. The carriers can be...
view full answer... - Recommended Roof Rack for a 2005 Dodge Ram 2500I do have an option for you but there are no bolt-on roof rack options for a 2005 Dodge Ram 2500, That said, we do still have options for you in the Rhino-Rack Aero Bar Roof Rack part # Y02-490B which is primarily designed for camper shells but can also be used on a roof via drilling. It will then provide you with an adjustable crossbar spread which uses aero bars. The aero bars are most widely compatible with rooftop accessories and they have the best wind resistance.
view full answer... - Roof Rack Recommendation for a 2006 Ram 2500 Mega CabWhile we have a couple great options for you, we do not carry a roof rack system that installs into your door jambs for your 2006 Dodge Ram 2500 Mega Cab. However, with that being said, we do carry a drill-on option. If you wish to go this route, I recommend the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount # Y02-490B. If you want to go with an option that doesn't require drilling, I recommend using the SeaSucker Monkey Bars # 298-SX6000B. Not only does the Monkey Bars...
view full answer... - Roof Rack Recommendation for Snugtop Camper Shell without Tracks on 2018 Ram 2500For your Snugtop camper shell on your 6-1/2 foot bed on your 2018 Ram 2500, I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - 59" Long # Y02-490B. With this kit, it comes with everything you need: 2 63" tracks, 4 quick mount legs, 2 Vortex aero crossbars, and all the required mounting hardware for the tracks. With the aero crossbars, you receive an extremely aerodynamic rack that ultimately leads to a quieter ride and increased fuel efficiency. It also...
view full answer... - Will the Yakima RocketBox 12 on the Vortex Aero Crossbars on the # Y02-490B for a 2005 Dodge Dakota?I went ahead and reached out to my contact at Yakima, and she said that while they cannot confirm that the Yakima RocketBox Pro 12 Y07191 can clamp around the Vortex Aero bars on the # Y02-490B on your 2005 Dodge Dakota, she said they should work. If you want something that will definitely clamp around the bars, I recommend theThule Sidekick Roof Mounted Cargo Carrier Box - 8 cu Feet # TH78GC or the larger SportRack Vista XL Cargo Box - 18 cu Feet # SR7018. Both of these roof boxes come...
view full answer... - Roof Rack For a 2016 Ford F-250 Super DutyWe do have roof rack options for your 2016 Ford F-250, as long as you have either the Crew Cab or SuperCab. If you have the regular cab, we do not have a roof rack option. Crew Cab - Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 - Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA - Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK190 SuperCab - Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 - Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA -...
view full answer... - Is Aero Y02-490B Rhino-Rack Roof Rack Better Than Square Y01-130B For Camper ShellThe Rhino-Rack is a great choice to add a rack system to your camper, and while the square Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-130B has its uses, when it comes to using the rack for accessories and/or a tent, the best option is definitely the rack with aero-shaped bars: - Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B Both racks have the same 220 lb capacity so you aren't losing anything in that regard by going with aero bars, and aero bars are going...
view full answer... - Roof Rack and Kayak Carrier Recommendation for Carrying Kayaks with Truck Bed CanopyWe have crossbar sets that will fit on top of a truck canopy that you could then install a kayak carrier on, but we do not have racks for fitting inside a canopy. For example we have the Yakima HardTop SL Roof Rack # Y01618 which would be a great option. The Malone SaddleUp Carrier part # MPG110MD would then be a great option for a carrier.
view full answer... - How Is Rhino-Rack Roof Rack System Installed On Camper ShellThe Rhino-Rack Roof Rack System, part # Y02-490B attaches to the included tracks by using T-bolts and drilling into your camper shell roof. This system will work with camper shells, hard tonneaus or hardtop resin roofs without headliners. The legs included with this system attach to the tracks with the included barrel nuts, and can be moved inside the tracks to accommodate different loads. This system includes 63 inch tracks for each side of the camper shell and 59 inch long Aero silver...
view full answer... - Rhino-Rack Track Mounted Crossbars Compatibility with Pop-Up CamperThe Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount # Y02-490B will work on a pop-up camper. The system will require drilling into the camper canopy/roof to allow the connection of the rails. The rack itself is rated for 220 lbs, but your camper may have a different restriction so you should check with the manufacturer about the weight capacity of the roof.
view full answer... - Recommended Roof Rack and Track System for Truck Topper to Carry Canoe on 2012 Toyota Tundra CrewMaxWe can get you the parts needed to install a roof rack on your truck topper so you can haul your canoe. There are advantages to systems in regards to quality and value, and for your application the best fit is from Rhino-Rack, who is known for their quality, which is consistent with other brands, but often not with as high a price tag. What I recommend is: - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount # Y02-490B This will give you 59 inch crossbars on your camper shell,...
view full answer... - Will the Rhino-Rack Aero Bar Roof Rack Require Additional Holes to Be Drilled on 2021 Toyota TacomaI am not familiar with the spacing of the holes for the OEM racks on the 2021 Toyota Tacoma Pro with Double Cab. But, the odds of the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B working with those holes are slim and you will almost certainly have to drill news holes. It is possible that some of the holes can be used, but the track will likely require more holes and different spacing than the OEM holes that are present.
view full answer... - Can Thule Hullavator Fit on Rhino Rack Aero Roof Rack for Camper ShellsThe Thule Hullavator part # TH898 does require between 4 and 8 inches of crossbar overhang past the feet of the rack it installs on which is definitely possible with the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B that you referenced but it really depends on where you place the tracks on your roof. If you brought them in just a little bit you could easily have the 4 inches of overhang. So the short answer is yes this will work but it depends on where you place the tracks.
view full answer... - Rhino Rack Roof Rack Recommendation for Fitting Camper Shell Installed on 2012 GMC Sierra 1500Based on the dimensions you have the Rhino-Rack Roof Rack System # Y02-490B that you referenced would fit and work well on your camper shell. The dynamic weight capacity of this rack is 220 lbs so it also wouldn't have a problem with a tent as long as your camper shell is also rated for the weight.
view full answer...
Do you have a question about this Roof Rack?
Rhino Rack Accessories
Fit to this rack on your 2011 Chevrolet Colorado
Info for this part was:
Written by:
Tyler C
Updated by:
DeAnne T
Updated by:
Lisa S
Updated by:
Wilson B
Updated by:
Daron K
Updated by:
Alex H
Updated by:
Noah M
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
7/27/2023
Of course it should come with all the hardware that is needed. I know that you purchased what you needed however I will still have our Customer Service team get in touch.