Replacing an RV waste valve can be daunting, but with the Valterra Bladex Waste Valve Body, it's a breeze. The stationary and manual valve easily swaps out with your old unit, thanks to its straightforward design. All seals, nuts, and bolts are included, taking the guesswork out of what you need for a successful installation. Simply unbolt your old valve and place the new Valterra valve in its place for a quick and efficient repair.
No one likes blocked or backed-up tanks. Valterra’s 3-inch diameter passage ensures wastewater travels freely and efficiently, preventing unwelcome clogs. Whether you're on the road or setting up camp, this feature guarantees your black-water tank is always ready to perform its duty without a hitch.
Compatibility issues are a thing of the past with the Valterra Bladex Waste Valve Body. Designed to fit not just Valterra, but Bladex, Bristol, and Anonda valves too, you can rest easy knowing this waste valve will integrate seamlessly with your RV setup, reducing the need for additional adapters or modifications.
The everyday wear and tear on RV components can take a toll over time. Equipped with a sturdy plastic handle, the Valterra Bladex Waste Valve withstands repeated use while maintaining a solid feel in your hand. Whether you're a weekend traveler or a full-time RVer, this handle ensures dependable operation every time you need it.
No need to worry about awkward or hard-to-reach setups. This waste valve allows you to extend the handle with options available from 8" up to 36" lengths, ensuring it suits your specific RV configuration. Whether your valve is nestled in a tight space or requires an extended handle for convenience, Valterra has the flexibility to meet your needs.
When swapping out your old assembly, the Valterra Bladex Waste Valve eliminates compatibility worries with its hub-to-spigot flexibility. While some situations may require a T40 model depending on your current setup, this valve often fits right in, making the transition smooth and efficient for an easy upgrade from your worn-out system.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Valterra Bladex Waste Valve. This valve is a 3" Bladex valove. It's going to allow you to replace, repair, or upgrade to a new dependable valve. It's going to feature a plastic handle here on top. This is very strong and very durable. It's going to feature a stainless steel shaft that's corrosion resistant.
It's got the threaded handle that makes it easy for replacement if you ever need to do that. Now, Bladex valves are interchangeable with most other brands. It's going to come with the actual valve. It's going to come with the appropriate seals and the hardware that's needed to get it installed. The seals are made from santoprene 00:00:36 construction that's design to resist chemicals and corrosion. When you're ready to install it, you need to remove your old valve and seals and then place the new seals over the lip of the existing flanged fittings.
Insert the new valve, being careful not to dislodge the seals and then tighten everything in place for your full installation with the included nuts and bolts. It's a really easy operation. It's got a nice lever design to it, T-handled grip, just nice fluid consistent motion allows you to easily open and close the valve. Few measurements to go over with you real quick. The overall length with the unit in the closed position, we're looking at about 9 1/2". With it fully open, we're looking at about 12 3/4".
The width of the unit down here at this portion, that's going to give us a measurement of about 4 3/8". The thickness, it's going to measure about 13/16" thick. Then the mount holes, there's going to be four mount holes on the unit, one here on each corner. Those are going to be separated on center by 3 3/4" and that's going to be the same distance between each hole. That's going to do it for today's look at the Valterra Bladex 3" Waste Valve.
Do you have a question about this RV Waste Valve?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.