Does 3 Inch Valterra Bladex Waste Valve Have Spaces on Side Without Seals In
Updated 11/18/2020 | Published 11/15/2020 >
Question:
I have a new 3” bladex waste valve but want to be sure it’s not defective before I install it. The blade isn’t completely round and there is a little space on each side. I can’t see the space with the seals in place but just want to be sure. Thanks
asked by: Mike H
Helpful Expert Reply:
Thank you for your purchase from etrailer of the Valterra Bladex Waste Valve Body for RV Black Water Tank - Plastic Handle - 3" Diameter # T1003VP.
As you can see from the accompanying photo, it is normal for their to be a little space on each side if the seals are not installed so what you see is completely normal.
Product Page this Question was Asked From
Valterra Bladex Waste Valve Body for RV Black Water Tank - Plastic Handle - 3" Diameter
- RV Waste Valve
- Straight Valve
- Single Waste Valve
- 3 Inch Valve Body
- Manual
- 3 Inch Spigot
- Stationary Valve
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center That Has Brakes and Hubs
- Q&A: What is Difference Between 3,000 and 3,500 lb Trailer Brake Assembly
- Q&A: Spray Attachment for Dometic 400 Series
- Q&A: Replacement GE Air Conditioner for a ARC15AACBL2
- Q&A: Difference Between Valterra T1003VP and T1003VPM Waste Valves
- Q&A: Furrion Chill Cube Startup Amp Draw and Generator Compatibility
- Q&A: Replacement Grease Cap Plug for EZ Lube Grease Cap
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: 4-Step Guide to Installing RV Solar Power
- Article: How to Replace or Install an RV Roof Vent
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Trailer Lighting Requirements
- Article: How Does an RV Water Pump Work?



