How Do I Replace A Handle On My Valterra Waste Valve
Updated 09/30/2021 | Published 09/26/2021
Products Featured in This Question
Question:
My rig came equiped with an 8inch extension handle, that threaded into valve stem..this extension snapped off,,leaving the treaded porshion stuck inside stem, so a replacement 8extension can not be screwed in..Do you carry a sleeve may be ,3inch long that would slide over the 2 shafts so as to join then and secure with a few set screws on each stem,
asked by: Robert J
Expert Reply:
I spoke to a Valterra representative and I was told that they do not offer a sleeve to slide over the two shafts to join them together. If the male thread has broken in the handle, and the coupler is still in working order, you may be able to use Extension Rod Kit for Valterra Waste Valve - Adjustable - 6" to 8" and 9" to 11", part # T1046-12VP. The extension rod and mounting bracket would attach to the coupler of the waste valve. If the coupler is not intact you will have to replace the valve body. If you have a 3" waste valve you will need part # T1003VP. If you have a 1-1/2" waste valve you will need part # T1001VP.
I have included product description links, a demo video link, and an installation video link below.
Product Page this Question was Asked From
Extension Rod Kit for Valterra Waste Valve - Adjustable - 6" to 8" and 9" to 11"
- Accessories and Parts
- RV Waste Valves
- Waste Valve Parts
- Handles
- 6 - 9 Inch Long
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Valterra HydroFlush RV Black Tank Flush System
- Q&A: T1001VP RV Waste Valve Handle Type
- Search Results: rv black tank flush
- Search Results: rhino blaster
- Search Results: valterra
- Search Results: gate valve
- Search Results: waste hose
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Valterra Bladex Waste Valve Body for RV Black Water Tank - Plastic Handle - 3" Diameter
- Search Results: rv fresh water tank
- Video: Hands-On with the Valterra Master Blaster Tank Wand for RV Black-Water Tank
- Video: Tornado 360-Degree RV Holding Tank Rinser w/ 6' Long Hose Spec Review
- Video: The Low-Down on the Valterra Waste Valve for RV Black Water Tank
- Video: The Low-Down on the Valterra Flexible Tank Wand for RV Black-Water Tank
- Video: Feature Review B and B RV Flusher System w/ Plastic Check Valve
- Video: Feature Breakdown: Valterra Flexible Tank Wand for RV Black-Water Tank
- Shop: Camco Revolution RV Sewer Hose Extension w/ Swivel Bayonet and Lug Fittings - Brown - 10' Long
- Shop: Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug
- Shop: Valterra Master Blaster Tank Wand for RV Black-Water Tank
- Shop: RhinoFLEX Rhino Blaster Pro Adapter for Rinsing RV Holding Tanks and Sewer Hoses
- Search Results: rv vents and fans
- Video: All About the Valterra RV Water Tank
- Q&A: Why is the Advent Air Low Profile RV Air Conditioner System Not Recommended for a Utility Trailer?
- Article: How Your RV Water System Works: A Complete Newbie's Guide
- Q&A: Handle Extensions For RV Holding Tank Waste Valves
- Article: Best Bike Racks for Electric Bikes
- Q&A: Troubleshooting BAL 5.1 Stabilizer Jack System Not Moving Up or Down Manually
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Q&A: Replacement Components For A Schwintek Slide Out System
- Q&A: Replacement Converter for WFCO WF-8955PEC for Lithium Batteries
on Accessories and Parts
