Curt RV Bumper Hitch - 2"

See what our Experts say about this CURT RV and Camper Hitch

• Recommended Trailer Hitch for Towing for a Coleman Lite 2955RL Trailer Trailer
  Yes, you can install a trailer hitch on a Coleman Lite 2955RL Trailer Trailer. In order to do this you have a few options. The first is a bumper mount hitch which bolts onto the bumper, the Curt RV Bumper Hitch part # C19101. This is a good option for bike racks or other hitch mounted accessories but isn't great for towing and would likely require bracing of the factory bumper if used in such manor. Instead, I recommend a frame mounted trailer hitch which is much stronger, the Adjustable...
  view full answer...
• Recommended Bike Rack and Bumper Hitch for 2021 Forest River Salem FSX
  The rear bumper on a 2021 Forest River Salem FSX is plenty capable of hauling bikes. In order to do this this you'd just need a bumper mounted hitch and a travel trailer compatible bike rack. The Curt RV Bumper Hitch part # C19101 is a great option and would then pair well with a rack like the Hollywood Racks RV Rider Bike Rack part # HLY64FR. I'm not sure what type of bikes you have so if this won't work you can choose from the list of other options I have attached below. If the bumper...
  view full answer...
• Distance From Top Mounting Holes to Top of Curt RV Bumper Hitch C19101
  We were able to measure the distance for you from the top mounting holes to the top of the very top of the Curt RV Bumper Hitch # C19101. As you can see by the accompanying diagram, the distance from the bottom of those mounting holes to the top of the hitch measures 1-1/8 inch so you will have enough clearance for the hitch to be installed without any interference. I have added a link below to a video review for you to check out as well of the Curt RV Bumper Hitch # C19101.
  view full answer...
  
• Can Curt RV Bumper Hitch C19101 Carry Dirt Bike Carrier that Weighs 350 lbs
  You'd be at the exact weight capacity of the Curt RV Bumper Hitch part # C19101 but based on what you mentioned yes the hitch would have the capacity needed. You would need to verify the bumper of your trailer is rated for the 350 lbs and that your carrier is rated for the rougher ride quality at the rear of travel trailers though.
  view full answer...
• Could Curt RV Hitch C19101 Be Used to Flat Tow a Vehicle
  There's not reason the Curt hitch # C19101 couldn't fit the rear bumper of your 2020 Crossroads Sunset and be used to flat tow a vehicle as long as it weighed less than 3,500 lbs.
  view full answer...
• Availability of Hitch Adapter with 4 Inch Drop to Pull Tow Dolly and Attach Bike Rack
  To both pull your tow dolly and attach your Swagman Original Bike Rack # S64152-2 to your 2019 Winnebago Adventurer the Roadmaster Dual Hitch Receiver Adapter # RM-077-4 will work perfectly. This adapter will insert into the 2 inch receiver on your RV to provide two separate 2 inch receivers, the bottom of which giving you the needed 4 inch drop for your dolly. I reached out to my contact at Roadmaster just to verify that this could be used with a tow dolly. In the past they only rated...
  view full answer...
• Recommended Trailer Hitch for Fifth Wheel Trailer to Tow a Second Light Weight Trailer
  We generally do not recommend towing a trailer with a trailer. It is illegal in many states, so you will want to check with the DMV in any state you travel through. Also you will want to check with the manufacturer of your fifth wheel to see if the bumper on your trailer is designed to support any additional weight due to its construction. Some fifth wheels are, and some aren't. That said, it sounds like you may have a 4 inch continuously welded steel RV bumper so you can use the Curt...
  view full answer...
• Water Tanks in the Way of Adjustable Width Trailer Hitch Receiver 13703
  The Adjustable Width Trailer Hitch Receiver part # 13703 isn't a fit for every trailer, it will work on some and others it won't due to items installed on the trailer such as stabilizer jacks, water tanks etc. Please note, this can differ from trailer to trailer so we always recommend looking at the undercarriage prior to purchase to ensure compatibility. That said, if the this trailer hitch won't work there are thankfully many of other options such as the Curt RV Bumper Hitch part # C19101...
  view full answer...
• Recommendations for Carrying Kayaks and Bikes while Pulling Travel Trailer with 2002 GMC Sierra 1500
  I have a way to help you carry all of your equipment at the same time or individually on your 2002 GMC Sierra 1500. First, I recommend the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210. This will work as long as your travel trailer is less than that 7500 lb capacity. This will allow you to carry a bike rack and tow a trailer, or it will allow you to tow a trailer and use a load extender for your kayaks. I recommend the Rhino-Rack...
  view full answer...
• Recommended Hitch to Haul Bikes on my RV Bumper
  The Curt RV Bumper Hitch part # C19101 can be a great choice but it does require a full wrap bumper. This doesn't necissarily mean it is solid steel it just means it is boxed or it has metal on all 4 sides. I explain this further in the attached video. Part # C19101 is for 2"x4" bumpers and the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 is for 4"x4" bumpers. Please check your owner's manual to ensure you do not exceed what your camper is able to haul. The Yakima LongHaul part...
  view full answer...
• Whats the Difference Between Curt Hitch E-100 and C19101
  The difference between the Curt RV Bumper Hitch # C19101 and the Curt RV Bumper Hitch # E-100 is the application. If you have a 4 inch square bumper you would want the # E-100, if you have a 2 inch x 4 inch rectangular bumper you would want the # C19101. If you check out the pictures I attached you can see how the mounting plates are different distances apart.
  view full answer...
  
• Hitch Recommendations for a Scamp Trailer Bumper
  Depending on the dimensions of your trailer's bumper I believe we could have a solution for you that would not require welding. If you have a 4 inch by 4 inch bumper you could use the part # E-100. If you have 2x4 inch bumper you could use the # C19101. These have 2 inch openings though. For a hitch opening that measures 1-1/4 inch that would require welding on you would want the part # E-911. You will need to make sure that the bike racks you plan on using are rated for use on an RV. I...
  view full answer...
• Recommended Trailer Hitch Receiver for 1962 Aloha Trailer with 3x1.5 C-Channel Bumper?
  There isn't a bumper mount option for that 3 x 1.5 inch c-channel. Instead you will need to use a frame mounted hitch like the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701. This is a bolt on option that will work with Box frame, C-Channel frame, or I-Beam frame.
  view full answer...
• Availability of a Bumper Mounted Hitch with 500 lb Tongue Weight Capacity
  We have a bumper mounted hitch with a 500 lb capacity. Check out the Curt Bumper Hitch part # E-3S. You should confirm that the bumper on your RV has the same 500 lb tongue weight capacity if you plan on using your cargo carrier to it's capacity. You should note that the weight of the cargo carrier needs to be taken into account as tongue weight.
  view full answer...
• 2006 Jayco Feather Sport 17 ft Trailer Hitch Option
  I looked up pictures of your 2006 Jayco Feather Sport 17 ft trailer and I couldn't find any pictures of a rear square bumper. The best option I can offer is the part # 13703 which can fit frame width of 22 to 72 inches that are I beam, C channel or boxed. You will need to go with an RV rated bike rack though like the ones available at the attached link.
  view full answer...
• What Size Frame Does Curt hitch # C19101 Fit
  The frame of your travel trailer would need to be 2 inches wide and 4 inches tall for the Curt hitch part # C19101 to attach to it. I am not totally sure how you would be using the hitch so this is probably not something we can safely guarantee will work.
  view full answer...
  
• RV-Rated 3-Bike Rack & Hitch for 2016 Coachman Clipper Pop Up Camper Trailer
  Curt RV hitches # C19101 and # E-100 will not work on a C-channel bumper so you may want to consider a frame-mounted RV hitch like # 13703 or one of the others shown on the linked page. These have a 2-inch receiver opening for your bike rack or other RV-rated accessory and the various model fits varying frame widths; some are bolt-on while others are weld-on products. You can confirm in your owner's manual whether Coachman rated the camper's frame for hitch installation. A bike rack to...
  view full answer...
• RV Bumper Mount Trailer Hitch Receiver for 2 by 2 Inch Bumpers
  I verified with Curt that the RV Bumper Hitch # C19101 can be used on a 2 by 2 inch bumper. Since you're not going to be using the hitch for towing you'll also need the support strap # 18050. It's required for all non-trailer loads on the hitch per Curt's warranty.
  view full answer...
• Availability of Hitch/Bike Rack to Fit 5-1/2 Tall RV Bumper
  The closest thing we have to that is the Curt RV Bumper Hitch # C19101 but that fits a 4x2 bumper so it doesn't match your specs. With this being the case though we still might have a solution for you. If your RV is a trailer with an A-Frame tongue jack then the Jack-It 2 Bike Rack # LC429756 is a great choice and it fits with just about any A-Frame jack out there! This puts your bikes in a unique place and helps to keep the length at the back of your trailer to a minimum. I've attached...
  view full answer...
• Trailer Hitch and Bike Carrier Recommendations for a Pop-Up Camper to Carry 4 Bikes
  Given that the bumper on your pop-up camper isn't the same width at the top and bottom you will need to look at frame mounted hitches instead of bumper mounted hitches. I have included a link to all of the RV frame mounted hitches we carry. The most popular is Curt hitch # 13703. It fits frame widths of 22 to 72 inches (measured outside to outside) and will fit box, C-Channel, and I-Beam frames. The hitch can be bolted or welded on but welding should be done by a professional welder. If...
  view full answer...
• Recommended Trailer Hitch for Rear of Jayco Jayflight Trailer
  The best option we have to add a rear trailer hitch to a Jayco Jayflight is with either a frame mounted hitch, the Adjustable Width Trailer Hitch Receiver part # 13703 or a bumper mounted hitch, the Curt RV Bumper Hitch part # C19101. These options will both work great to hold a bike rack and bikes. The frame mounted option will allow for a higher weight capacity in most cases. I don't have any information on the brackets welded to the frame unfortunately and whether or not they are for...
  view full answer...
• Options for Carrying 4 Bikes on a Tent Camper
  There are several options for carrying 4 bikes on your tent trailer, however, determining the best option for you will depend on how your trailer is equipped. The best option would be to use a hitch mount bike rack that is approved for use on RVs and trailers. A bike rack like the Yakima LongHaul 4-Bike Rack, # Y02476, would be a good option. Whichever bike rack you choose you need to make sure it's rated to be used on the back of a trailer. There is more bounce and movement at the back...
  view full answer...
• Availability of Trailer Hitch to Fit Bumper of 2016 1706 Viking
  Go look at the bumper you have at the rear of your 2016 1706 Viking. What are the dimensions of it? Is the bumper welded all the way around or is there an open side? If there is an open side you have a C-channel bumper which the # C19101 would not fit. It would need to be a 2 inch wide by 4 inch tall continuously welded bumper for this hitch to fit. If instead it is 4 inch by 4 inch you would want the part # E-100.
  view full answer...
• Fitment of Curt RV Bumper Hitch for Jayco Jayfeather Travel Trailer
  The Curt RV Bumper Hitch, # C19101 will fit 4 x 2 Inch RV bumpers. We do not have the ability to pull OEM build sheets and identify what part numbers where used when constructing your travel trailer. But if you have a 4 x 2 inch bumper this will fit. If you have a 4 x4 inch bumper, you will want to select the Curt RV Bumper Trailer Hitch, # E-100.
  view full answer...

Do you have a question about this RV and Camper Hitch?