Curt RV Bumper 2" Trailer Hitch Receiver
Item # E-100
Retail:$169.95
Our Price: $106.69
You Save: $63.26
Confirmed to Fit
2009 K-Z Sportsmen Travel Trailer
202LE
202SLE
231RS
240BHS
242LE
251RB
261RK
272LE
280BH
280LE
280RL
290KB
290RE
310FK
310RKS
314LE
318LE
321BH
324BH
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (728)
- Q & A (0)
- Photos
2009 K-Z Sportsmen Travel Trailer - Curt RV Bumper 2" Trailer Hitch Receiver
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- CURT
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.
Features:
- Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers
- Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers
- Powder coat finish resists corrosion
- Includes mounting hardware
- Weight capacity: 3,500 lbs GTW / 350 lbs TW
Note: For use with RV-approved accessories only.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
19100 Curt RV Bumper 2" Trailer Hitch Receiver
Installation Details
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Curt RV Bumper 2" Trailer Hitch Receiver - E-100
Average Customer Rating: 4.8 out of 5 stars (728 Customer Reviews)
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.by: Lynn01/24/2019
2017 Toyota Tundra
Just installed this unit on my travel trailer bumper and it appears to be fairly heavy duty and secure. Did have some trouble getting it on the bumper but used my truck tire jack for leverage & it popped right on (see photo). The receiver is just what I need for my bike rack & 2 bikes that I will be hauling to Florida next month. Safety first & this unit looks well made & will hold to the challenges of the road.
by: Stephen 03/27/2023
I still need to install it but the quality looks perfect. I like that with this style you can mount it off-center if you have a spare tire as well on your back bumper I really appreciate the expedited shipping. I always shop from a trailer if I can.
Stephen
3/28/2024
Paint is holding up perfectly and it’s still easy to use. If you install this on a bumper, it’s really recommended that you weld the bumper to strengthen or get some products to help out. The torque on the frame connection will rip off the bumper eventually if not reinforced
by: Gary B.07/18/2017
The Curt trailer hitch is solid as can be and couldn't have been any easier to install. Product arrived ahead of schedule and George at the erailer is great with email communications . I will be purchasing future products from this company. Great job George at etrailer. happy camping
Gary B.
7/20/2018
Finally started using it this year it works great!!
by: Lawrence02/10/2024
2016 Jayco Jay Flight SLX Travel Trailer
This receiver fit perfectly and was easy to install. We have our Stow a Way luggage carrier mounted on the back of our little RV trailer.
Tried to download a pic but unsuccessful.
by: Kevin04/25/2024
As advertised, fit perfect on the back of my camper, no issues. Always great service from etrailer
by: Timothy 05/22/2024
Solid hitch. Performs as it should, was easy to install.
by: Tim 06/03/2024
Haven't used it yet but I did have one on a previous trailer and it worked great. That is the reason that I purchased it..
by: Randall12/10/2019
Thank you etrailer, I’ve been looking for this bumper receiver for my 38’ Keystone toy hauler for a bike rack. Ordered and four days later it’s here. Installed in 10mins, fits perfectly. I used a flat washer and nylok nuts instead of nuts supplied. Well built and sturdy.
Randall
12/11/2020
Great product, we used it all summer on our travels without any problems.
by: Chris05/23/2024
Box was delivered all busted up and taped up like Simone returned it missing 1 nut and scratches all ove not happy at all for the price should’ve told me it was used or something
Brooke M.
5/23/2024
Thanks for letting us know and for the pictures! I will make sure our team gets you taken care of.
by: Aaron11/24/2022
This thing is holding up great. I had a different stile before and it broke driving down the road. Causing my cargo rack to fall off carrying my generator and my bb-qer. But this mount has been amazing
by: Kyle12/09/2017
Awesome product. I did have one problem with it but it was on my end. The bumper on my Keystone Summerland Series Mini was a little to close to the body so I had to flip the mount over to make the bolts work. Shipping was fast!!!! 4 days including the day I ordered. Would have been 3 but something happened with UPS. I will definitely be buying more products from etrailer Corporation.
Kyle
12/9/2018
Still holding up great a year later. It easily allows me to carry my cargo receiver which has my generator and a couple five gallon gas cans on the back.
by: Bill T.10/30/2019
I have a 21.5' Trail-Lite RV that had a plastic bumper. I wanted to put a Bike Rack on the back of the RV, so I bought some 3/16" 4" x 4" square stock and had a welder weld it on the back of the RV. This is a lot heaver duty than a stock bumper. Once the bumper was installed, I bought this Curt bumper hitch, part E-100, from etrailer.com. Installation was a breeze, and only took a few minutes. I used some grease and a small hydraulic jack to encourage the hitch to slide on. You DO NOT need to drill out the holes as some have reported. A 4 pound sledge will encourage the back hitch hole to pop above the 4" bumper. Use some never seize on the threads so it will come apart some day. Here is the finished product, with my e-bike installed. Shipping was quick and FREE! (I ordered over $100 of stuff)
by: DW07/24/2019
Torqued to spec. and works as expected. We hang a bike rack off of it on the back of a travel trailer. Solid design.
Reason not a 5: There was a slight alignment issue getting the bolts through both sides due to the stampings not being aligned when welded. Once I got the bolts through, no issue, but there was interference with the threads on the stamping; had to turn the bolts through as they would not slip through.
Still would recommend.
by: Matt 10/09/2023
Delivered quickly. Haven’t installed it yet and look forward to using this for my Thule Bike rack.
by: Mark06/04/2023
A previous trailer hitch receiver was not adequate for a bike rack with heavy mountain bikes. It developed cracks in the metal. There’s a fair amount of vibration for a bike rack at the back end of a camp trailer. I bought the Curt receiver to mount a 50# Kuat bike rack to carry two +50# e-bikes. So the load is +150# plus the torque of extending almost three feet from the receiver. Worked great. An observer noted the rack and bikes were quite stable.
by: Eric09/24/2019
Thanks to etrailer and Michelle for helping me select the Curt E-100 4" bumper mount cargo reciever hitch. The quick delivery helped us get on our fall trip accordingly. Definatly the right product for this application.
by: Matthew06/22/2020
Hitch mount was as info described. Needed to mount a heavy 4 bike rack on my RV. Arrived on time and fit perfectly. etrailer videos were very helpful in selecting the right hitch for my weight requirements. You took the time to make them to support the products, you earned my business because of it.
by: Bruce11/24/2023
Wow! Service was personal, quick & complete! Will definitely buy from the folks at etrailer again!
by: Nate 08/30/2023
Easy to install and has worked great for a bike rack on the back of our travel trailer.
by: RAY K04/13/2012
HELLO
I LOOKED AT A LOT OF TRAILER HITCH RECEIVERS.
AND THEY WERE ALL JUNK.
ON TELL I FOUND CURT RV TRAILER RECEIVER
I NEED IT FOR MY BIKE RACK
I LIKE THE WAY IT IS MADE
IT LOOKS GOOD ON MY NEW RV
THANK YOU ETRAILER YOUR RATING IS EXCELLENT
I SENT YOU THE MONEY IT WAS ON MY PORCH IN 3 DAYS
by: Jody06/13/2020
I am using the Curt bumper hitch for my travel trailer . I mounted it to the 4x4 bumper . It fit well and will be perfect for holding my kayaks . Would recommend to anyone , great product !!
by: Bill06/17/2020
Great product, solid and easy to install on our Flagstaff Camper. E-Trailer kept a timely Email contact informing me of the tracking progress on delivery. Thanks for the great product and professional service.
by: Philip11/20/2018
0 0
just received today, mounted it on the bumper vertically so as to make a mount for my waste travel tote for my travel trailer, or i can mount horizontally to use my luggage rack.
Shipping was quick.
So far so good.
by: Gregory 05/04/2024
2022 Grand Design Imagine Travel Trailer
Very prompt shipping thank you! Easy to order
by: Gary 05/25/2024
2016 Grand Design Imagine Travel Trailer
You're awesome!:)
25
728
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Use of Curt Hitch Stabilizer Strap 18050 on Cedar Creek 5th Wheel TrailerCurt's Hitch Stabilizer Strap # 18050 is required for use with some of their hitch receivers to support the hitch-mounted load which helps to reduce its motion as you drive. This helps prevent excessive stress on the receiver tube. The various Curt brand hitches suitable for installation on an RV are shown on the linked page. These include bumper-mount hitches like # E-100 and frame-mounted hitches like # 13703. For cases where there is not a handy spot to attach the strap to the RV you...
view full answer... - Could the Curt Hitch part # E-100 be Installed Above Trailer BumperThere's no reason you couldn't install the Curt Hitch part # E-100 with the hitch opening above the bumper that you plan to install the hitch onto. I spoke with my contact at Curt and he confirmed that this would be just fine. We had a customer leave a review for this hitch where he did this for carrying a bike rack and he said it worked very well.
view full answer... - Recommendations for Carrying 4 Bikes on Rear of Flagstaff MicroLite XLTYour concern about the potential liability caused by objects coming off the rear of an RV is a valid one. To determine the carrying capacity of your RV bumper, the RV manufacturer will be your best resource, as I do not have engineering information about bumper capacities on any one given RV. Once the capacity of the bumper is known, you can then make a decision about how much weight you can carry and which rack you should use. The strength of the bumper will depend on its construction...
view full answer... - Recommended Bike Rack for Bumper of Casita Travel Trailer with Spare TireThe Surco Spare Tire Bike Rack # BT300 is not recommended for use on the back of a travel trailer. The movement is far greater on the back of a trailer than on the back of a vehicle so many options like the spare tire racks are not compatible. My recommendation for your trailer is to use the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 and then the Yakima LongHaul # Y02476 and then use the cable lock like # e98891.
view full answer... - Can a Trailer Hitch be Installed on the Back of a TrailerI am not really sure what you are trying to do but you can install a trailer hitch on the rear of a trailer. There are two different kinds of trailer hitches for trailers, frame mount and bumper mount. The frame mount hitches are much stronger but will require more effort to install whereas bumper mount hitches typically have less of a capacity as they are limited to the bumpers capacity but require less effort to install. Please note that before you install a bumper mount hitch you will...
view full answer... - Could RV Bumper Hitch # E-100 Carry 250 lb Cargo CarrierThe Curt RV bumper hitch part # E-100 has a tongue weight capacity of 350 lbs so it would easily handle the weight of a 250 lb cargo carrier.
view full answer... - Could the Curt RV Bumper Trailer Hitch Receiver E-100 Tow a Trailer with a Golf CartThe Curt Hitch part # E-100 can tow a trailer that weighs up to 3,500 lbs. You would need to consider the weight of your trailer when it is loaded to determine if that would be adequate capacity. You also would need to consider the towing capacities of the bumper you would install this on. You would need to contact the manufacturer of the RV that info.
view full answer... - Travel Trailer Hitch RecommendationsOnly certain bike racks are rated for use behind an RV/trailer. The reason is for that is because they have a much rougher ride present there when compared to a vehicle. You would need to contact Allen with the model of your bike rack to determine if it would be rated for use on a trailer. That we are aware of none of their racks are rated for this. I attached a link to a page that has all of the RV bike racks we offer. For a bumper mounted hitch for your 4 inch bumper I would recommend...
view full answer... - Recommended Trailer Hitch for 5th Wheel Trailer to Use with Bike RackWe have a nice selection of trailer hitch receivers designed specifically for RVs and trailers like your 2017 Cedar Creek Hathaway 5th Wheel. I first recommend looking at the Curt RV Bumper 2 Inch Trailer Hitch Receiver # E-100. If you have a 4 inch square channel bumper on the rear of the trailer, this will work perfectly to provide a 2 inch receiver opening for hitch-mounted accessories like bike racks. If you have a different style bumper or one that is not designed to hold the weight...
view full answer... - Trailer Hitch for Travel Trailer that Has Thin Square Bumper not Rated for HitchFor a bumper as thin as yours I would not recommend the # E-100 for installing a hitch. Instead I would recommend going with a frame mount like the part # 13703 that will fit your trailer as long as your outside to outside frame dimensions are between 22 and 72 inches. Since the goal is to carry a cargo carrier you would need to use the stabilizer strap part # 18050 as well per Curt's warranty requirements.
view full answer... - Will Curt Bumper Mount Trailer Hitch # E-100 Fit a 4-1/4 Inch Bumper on a Starcraft Starsteam 24QBThe Curt hitch # E-100 needs a 4 inch square continuous welded steel bumper to install safely. If by removing the decorative trim, you are left with a 4 inch square continuous welded steel bumper, then this hitch will work for you. Be sure to check the owners manual to determine if the bumper can be used for this application. the safest option is to go with a frame mount hitch. I have included a link to the options for you. The most popular is Curt hitch # 13703 because it fits a wide...
view full answer... - Receiver Needed for 5th Wheel with 4 Inch Bumper with 5-1/2 Inch DropGiven the 5-1/2 inch distance between the bottom of the frame members and the bottom of your bumper, the # 13703 will not fit your application. The E-100 you mention is intended for use with 4 inch square bumpers, as well as the Ultra-Fab # UF35-946402. If you have clearance problems at the rear of the bumper, the Ultra-Fab receiver might be a good alternative as it connects to the underside of the bumper using U-bolts, rather than slipping around it like the E-100 does. Either receiver...
view full answer... - Can a Bumper Mounted Trailer Hitch Be Installed on a 2015 Coleman Travel Trailer to Carry BikesThe bumper should be hollow. If it wasn't and was made of steel it would be very, very heavy! If the bumper has just one long weld its entire length then it would be a continuous weld. As far as the bumper capacity it can more than likely support the spare and a couple of bikes. But, to know for sure, I strongly advise contacting the manufacturer to ask so you got all your bases covered. If everything checks out you could use Curt hitch # E-100. But instead of doing that I actually recommend...
view full answer... - Will the Curt RV Bumper Hitch, Part E-100, Clear the Spare Tire Support on My RVThe hitch pin of the RV Bumper Hitch, part # E-100 would fall approximately 1-1/2 inches behind the front face of the bumper. You will want to measure from that point out to where it will clear the spare tire support. Compare this measurement to the shank on your cargo carrier. If the distance from the pin hole on the cargo carrier shank to the closest edge of the basket is greater than the clearance measurement you made, you should be fine. Using an extension, like part # HE06 is possible....
view full answer... - Recommended Trailer Hitch for a Forest River Cherokee 284DBHThe Curt RV Bumper 2" Trailer Hitch Receiver, # E-100 is designed to fit standard 4" x 4" rear bumpers providing ability to tow a trailer up to 3,500 lbs. However, just because this component is rated for that does not mean the bumper on your RV is; you will need to confirm with manufacturer for spec on your Forest River Cherokee 284DBH. In addition, you will need to check legality of towing a bumper pull trailer behind a bumper pull trailer. Pulling a trailer behind a 5th wheel is frequently...
view full answer... - Suggestions for 2021 R-pod 202 Bike RackI suggest not mounting to the back because of the added amount of movement and torque that the bike rack would receive. The Stromberg Carlson Bike Bunk Carrier for A-Frame Trailers, # CC-275, is not designed for that. Instead, I suggest the JHitch-It 2 Bike Rack for Straight Tongue Trailers, # LC731138. I don't know if your R-pod has a solid enough rear bumper or the dimensions needed for the Curt RV Bumper 2" Trailer Hitch Receiver, # E-100. This is a bumper mounted hitch intended...
view full answer... - Scooter Carrier and Hitch Recommendation for RV with 4 inch Square BumperIf you would like a motorcycle carrier that will work on a motorhome, I recommend looking at the Ultra-Fab Motorcycle Carrier, # UF48-979033. We were informed by Ultra-Fab that it is okay to use this carrier on a motorhome or trailer. For a hitch to mount to your 4 inch bumper (assuming it is rated for the weight of your scooter and carrier), you would want the part # E-100. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported...
view full answer... - Recommended Bumper Hitch for Cargo Carrier and Generator on 2019 Jayco Jay Feather X23E TrailerThe Buyers Products RV Bumper Receiver Hitch # 337RVA24 is ideal for adding a bike rack or cargo carrier to your RV. It is only really recommended for 200 lbs total tongue weight. For your application I recommend the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 which is a much more sturdy hitch that is rated for 350 lbs tongue weight. This will allow you to use the TorkLift Lock and Load SideKick 21-1/4" x 16-1/8" Cargo Tray - 2" Hitches - 200 lbs # TLA7901 or the TorkLift Lock and...
view full answer... - Thickness of Metal that Curt RV Bumper Hitch # E-100 is Made FromI spoke with Curt and they informed me that the thickness of the metal that the RV Hitch part # E-100 is .25 of an inch and the material is mild steel. The hitch has a 3,500 lb trailer towing capacity as well. I attached a review video for the hitch for you to check out as well.
view full answer... - Four Bike Rack for my Camper BumperWe have options available that will allow for the carrying bikes on the back of your camper but the Swagman Platform-Style 2 Bike Rack part # S64663 does not have an expandable feature. Instead the Swagman Trailhead 4-Bike Rack for 2" Hitches part # S63381 paired with the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 will allow you to transport 4 bikes behind your camper and also like on a vehicle like the other Swagman you looked at. Of course if you have carbon frame bikes you...
view full answer... - Curt Bumper Mounted Receiver Part # E-100 for Towing Small Boat Behind RVThe Curt bumper mounted receiver part # E-100 will serve that purpose. The receiver itself provides a 3500 lb towing/ 350 lb tongue weight capacity. This assumes that the 4 inch bumper on your RV has sufficient capacity to safely tow the towing/tongue weight of your boat and trailer. I would recommend checking with the RV manufacturer regarding the capacity of the bumper if it is not mentioned in the owners manual.
view full answer... - Will Curt Trailer Hitch and Cargo Carrier Work on Trailer With 4 Inch BumperThe Stromberg Carlson Cargo Carrier # CC-100 can absolutely be used with a Curt bumper mounted hitch on your 2017 Keystone Cougar 26RLS to carry a max of 200 lbs of cargo. Since you mentioned you have a 4 inch metal bumper the correct hitch is likely the Curt RV Bumper 2" Trailer Hitch # E-100 which is a fit for a 4" x 4" square bumper; the Curt RV Bumper Hitch # C19101 is the other bumper mounted hitch for RVs and is for use with 2" x 4" RV bumpers so you will want to use the one that...
view full answer... - Hitch Options for Open Range 399BHS Travel TrailerWe offer several different options for installing a hitch on the rear of a camper or RV. If you click on the provided link, you can see the available options. Current pricing information is listed on each product description page. Frame mounted hitches like the # 13703 are a good option if the frame members of the camper are within the width range for the hitch, which is between 22 and 72 inches in this case. Although various frame mounted hitches carry a tongue weight capacity ranging...
view full answer... - Fitment of Curt RV Bumper Hitch for Jayco Jayfeather Travel Trailer The Curt RV Bumper Hitch, # C19101 will fit 4 x 2 Inch RV bumpers. We do not have the ability to pull OEM build sheets and identify what part numbers where used when constructing your travel trailer. But if you have a 4 x 2 inch bumper this will fit. If you have a 4 x4 inch bumper, you will want to select the Curt RV Bumper Trailer Hitch, # E-100.
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Randy B
Installed by:
Adam E
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Lynn
1/25/2020
After a year & 2 trips to Florida is perfect! No need to tighten the bolts due to vibration & wear & tear from a 45 lb bike rack & 40 lbs of bikes. I am extremely pleased with this receiver!