See what our Experts say about this CURT RV and Camper Hitch

• Recommended Hitch Bike Rack To Carry An E-Bike On A Travel Trailer
  We offer a number of bumper mounted trailer hitches. The Curt RV Bumper 2" Trailer Hitch Receiver, part # E-100, fits a 4" X 4" bumper. There is also a 4" X 2" version, part # C19101. Each of these trailer hitches have a maximum tongue weight of 350 lbs and a maximum gross trailer weight of 3,500 lbs. We only have one hitch bike rack that is rated for a travel trailer and rated to carry e-bikes that weigh as much as your bike. The Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches...
  view full answer...
• Recommended Hitch for a 5th Wheel Trailer
  No, you are exactly correct. Lots of people don't check to see if their bumper is rated for the Curt RV Bumper Hitch item # C19101 to be attached to it. This definitely will not work with your 5th wheel trailer. You'll want to go with one of our universal options for your 5th wheel trailer, instead. I recommend the Adjustable Width Trailer Hitch item # C13702. This hitch can be bolted or welded to your trailer's frame so long as it is no longer than 51" wide. It has a 500 lbs tongue weight...
  view full answer...
• RV Compatible Platform Bike Racks
  The Swagman Dispatch 2 Bike Platform Rack - 2" Hitches # S44FR is the platform bike rack I recommend that is compatible with RV and travel trailer use. It is a very nice bike rack that holds your bikes in 3 spots. It has the similar ratcheting hooks, but uses a different style wheel cradle. This rack has a fold down mast, but the rest of the frame is rigid to give the support needed for RV use. The Swagman Platform-Style 2 Bike Rack for 2" Hitches for RV Bumpers # S64663. is a bike...
  view full answer...
• Best Trailer Hitch Option For 2022 KZ Connect SE 241BHKSE Carrying Two E-Bikes
  Hello John, thanks for reaching out. Aside from the bumper hitch, the only way to add a 2" hitch to the back of your 2022 KZ Connect SE 241BHKSE is to use a universal from mount hitch like the Curt # 13703. This is an adjustable hitch that can fit frames between 22" and 72" wide. It can be bolted on or welded on. The brackets have a bit of drop built in to help clear the bumper. I have included dimensions for you so please check and make sure this will be appropriate for your trailer. The...
  view full answer...
• Availbility of Trailer Hitch for RV
  The RV hitches are fairly universal so I can give you some options and you can decide based on dimensions and the style you want. For a frame mounted hitch you will need to know the frame width of your RV. The Curt # C13701 fits frames 18" to 51" wide and the # 13703 fits frames 22" to 72" wide. You could also choose to go with a bumper mount hitch. The Curt # E-100 fits a 4" x 4" bumper and the # C19101 fits a 2" x 4" bumper. You will also need to find the capacity of your RV/bumper...
  view full answer...
• Can Swagman E-Spec Bike Rack on Back of Travel Trailer
  The Swagman E-Spec Bike Rack for 2 Electric Bikes part # S94FR which has a 70 lb per bike capacity can be used on the back of a trailer trailer. In order to do so you'd just need a trailer hitch, the Curt RV Bumper Hitch part # C19101 if you have a square rear bumper or the Adjustable Width Trailer Hitch Receiver for RVs part # 13703 if you don't is what I recommend.
  view full answer...
  
• Recommended Trailer Hitch for Dutchman Fourwinds with Jack Behind Bumper
  The best and easiest option to install a trailer hitch on the back of a trailer is with the Curt RV Bumper Hitch part # C19101 which bolts onto a standard 4" x 4" rear bumper. The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames part # UF35-946403 or one like it would not work in your particular application as it would need to be moved much further up therefore removing the jack you pointed out. Please note, if you need more support you can obtain brackets to help further support...
  view full answer...
  
• Recommended Trailer Hitch for a Forest River Cherokee Arctic Wolf
  The Adjustable Width Trailer Hitch Receiver part # 13703 is by far the most popular trailer hitch for trailers and will be an excellent option for a Forest River Cherokee Arctic Wolf. The Adjustable Width Trailer Hitch Receiver will fit all different types of trailer frames so you should not have any issues with compatibility. Please note, they do not offer any custom fit trailer hitch options for a Forest River Cherokee Arctic Wolf which is why you will need to use a universal option like...
  view full answer...
• Recommended RV Bumper Hitch for 2021 Aliner Expedition Camper
  I believe the 2021 Aliner Expedition Camper has a 2" by 4" bumper. Providing your bumper can support the attachment and weight, I highly recommend an RV Bumper Hitch, # C19101. This is a very cost effective way of adding a hitch to a small camper for attachments such as bike racks or cargo carrier, # e98874. This has a maximum tongue weight of up to a full 350 lbs. If you do not already have a bike rack that is rated for use on a travel trailer, please let us know and we will be glad...
  view full answer...
• Recommended Trailer Hitch for Rear of Jayco Jayflight Trailer
  The best option we have to add a rear trailer hitch to a Jayco Jayflight is with either a frame mounted hitch, the Adjustable Width Trailer Hitch Receiver part # 13703 or a bumper mounted hitch, the Curt RV Bumper Hitch part # C19101. These options will both work great to hold a bike rack and bikes. The frame mounted option will allow for a higher weight capacity in most cases. I don't have any information on the brackets welded to the frame unfortunately and whether or not they are for...
  view full answer...
• Trailer Hitch Options for a Casita Travel Trailer
  I did some research on the Casita travel trailers and after speaking with Casita, I found that the bumper on the Casita travel trailers were not designed to support any additional weight due to its construction. They also said they do not recommend mounting a hitch or any other type of accessory such as a bike rack or cargo carrier on the bumper. One option that may work for you is a frame mount trailer hitch such as the Curt Adjustable Width Hitch, # 13703. This is a universal RV style...
  view full answer...
• Types of RV Hitches for Toy Hauler to Allow Towing Boat Trailer
  We offer both frame-mount and bumper-mount hitches for trailers and all such items can be seen on the linked page. Frame-mount hitches like # C13701 will generally offer higher capacity than the bumper-mount variety like # C19101. Towing a trailer with another trailer is not recommended by many trailer makers and it may also be illegal in some states/provinces. Before installing any hitch on your toy hauler you will want to contact the manufacturer with your trailer's VIN. This will enable...
  view full answer...
• Recommendation For A Hitch For A 2017 Heartland Cyclone 5th Wheel Toy Hauler
  We have both frame-mount and bumper-mount hitches for your 2017 Heartland Cyclone 5th Wheel Toy Hauler and I have attached a link to our available inventory. Generally, Frame-mount hitches like the Curt Adjustable Trailer Hitch Receiver, Item # C13701, offer higher capacity than the bumper-mount variety like the Curt RV Bumper Hitch, # C19101. The Curt Adjustable Trailer Hitch Receiver has a Class III rating and can be bolted or welded on. It works with frames with a minimum width...
  view full answer...
• Trailer Hitch and Wiring for a 2007 Saturn Vue
  Actually, if you were to try to install Curt hitch # C19101 it would require a lot more work than the custom fit hitches for your 2007 Saturn Vue. You would have to access the metal bumper beam which would require removal of the rear fascia. Then once you get that removed it is possible, even likely, that the hitch will not fit. Installation of a custom hitch such as # 13591 is much easier as you can see in the video I have linked showing an example installation. I have also included a...
  view full answer...
• Hitch Recommendations For A 2021 Keystone Sprinter 3530DEN 5th Wheel Trailer
  Most bumpers on campers/RVs are not reinforced enough to handle any towing weight. The Curt RV Bumper Hitch - 2" Item # C19101 would definitely bolt on but that kind of weight would most likely rip your bumper off. I recommend using the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" Item # C13701 as it has a 500lbs weight capacity. If the distance between your frame is larger than 51" then the Adjustable Width Trailer Hitch Receiver for RVs, 22" to...
  view full answer...
• How Far is it From the Mounting Holes to the Receiver on Curt RV Bumper Trailer Hitch 19101
  I went out to the warehouse and pulled Curt RV bumper hitch # C19101 to take the measurement you need. From the bottom of the top set of mounting holes down to the top of the receiver is 4-1/16 inches. I have included a picture showing the measurement I took, a link to the instructions, and a link to a video review.
  view full answer...
  
• What Size Frame Does Curt hitch # C19101 Fit
  The frame of your travel trailer would need to be 2 inches wide and 4 inches tall for the Curt hitch part # C19101 to attach to it. I am not totally sure how you would be using the hitch so this is probably not something we can safely guarantee will work.
  view full answer...
  
• Recommended Trailer Hitch For Jayco Hayfeather X17Z Trailer
  A spacer may be used to take up the gap you would need, but with your bumper at 4-3/4 inches tall, it would prevent part # C19101 from being installed on it because the distance from the tube to the mounting holes measures 4-1/16 inches. I do not recommend drilling into the bumper to accommodate the mounting holes for part # C19101. I recommend the Curt Adjustable Hitch, part # 13703 as long as the width of your trailer frame is between 22 and 72 inches. I have attached a link to an...
  view full answer...
• Will the Flint Hill Goods 22" x 60" Cargo Carrier Work on a 5th Wheel Trailer
  Yes, the Flint Hill Goods 22" x 60" Cargo Carrier part # FHG49ZR can be used on a fifth wheel trailer along with any other trailer such as a travel. It simply requires a trailer hitch with two inch opening like the Curt RV Bumper Hitch part # C19101 for bumper mount or the Adjustable Width Trailer Hitch Receiver for RVs part # 13703 for frame mount.
  view full answer...
• Frame Mount Trailer Hitch Option for 2016 Keystone Passport 199ML to Carry Bike Rack
  I recommend going with an RV trailer hitch that will mount to the trailer frame, like the Hidden Hitch Multi-fit Moto Home Trailer Hitch # 88201. The 2 inch hitch receiver will work well to carry RV approved accessories. This hitch will fit trailers with frames from 47 inches - 71 inches wide. It is a good idea to measure your trailer's frame to ensure this hitch will fit. Another option is the Curt Adjustable Width Trailer Hitch Receiver # 13703. This hitch is designed to fit trailers...
  view full answer...
• Can the Curt Bumper Mount Trailer Hitch # C19101 be used Upside Down
  You can certainly use the Curt Bumper Mount Trailer Hitch, # C19101, upside down. I spoke with my contact at Curt to see if there were any restrictions or further limitations by using this hitch upside down and he told me that you will have no problem using it that way. The capacities of the hitch will stay the same and you can gain more ground clearance for your cargo carrier (which can be a big deal at the back of RVs and trailers).
  view full answer...
• Recommended Trailer Hitch Receiver and Bike Rack for Viking Trailer with C-Channel Bumper
  For the 2x4 inch C channel bumper on your Viking Epic Trailer, the best option for installing a trailer hitch receiver to use with a bike rack is going to be a frame-mount option like the Curt Adjustable Width # 13703. This is because the C channel bumpers are simply not designed to support the weight of a bolt-on receiver like the Curt # C19101 along with the bike rack and loaded bikes. The Curt Adjustable Width Trailer Hitch can be either bolted or welded to the trailer frame and will...
  view full answer...
• Difference Between Curt RV Bumper Hitches 19101 and 19100
  The difference between the two hitches is the size bumper they are designed to fit. The 19100 # E-100 is designed to fit a 4 inch square bumper and the # C19101 on the other hand is designed to fit a 2 inch by 4 inch bumper instead. Basically you'd need to measure the dimensions of your bumper to know which you would need. Most likely it's a 4 inch square bumper though as that is the most common size.
  view full answer...
• Using Curt # C19101 RV Bumper Hitch on 2002 Colemen Pop-Up w/ C-Channel Bumper
  According to my Curt Representative, their # C19101 has not been tested on a C-channel bumper. When they tested it on a tube bumper, it was found to have a 3500 towing 350 lb tongue weight capacity. Since it hasn't been tested for the use you are proposing, the weight capacity would be completely unknown, which is why Curt doesn't recommend it. Depending on how far apart the frame members of the pop-up are, measured outside to outside, you might be able to use a multi-fit hitch like #...
  view full answer...

Do you have a question about this RV and Camper Hitch?