Sturdy RV steps detach from under your camper door for tight spaces, and the legs individually adjust to uneven ground to provide a wobble-free step into your camper. Fits a threshold-to-ground height between 35-1/2" and 44".
Features:
Specs:
If you've ever stepped into a camper that has standard metal steps, you've probably felt that scary springboard effect that makes you reach for the handle. That bounce occurs because those pull-out steps never touch the ground. MORryde's Quick Connect steps have adjustable legs that steady the steps on the ground, so you can feel safe using them. Also, the steps are detachable, which means they aren't left out in the elements to rust or warp like factory steps.
But what makes these MORryde steps different from other detachable steps, the Brophy scissor steps or the TorkLift GlowSteps? The Quick Connect steps have a couple advantages over the Brophy or TorkLift steps.
First, the Quick Connect steps easily detach from the mounting brackets. This is handy if you want the sturdiness of the fold-down steps, without the inconvenience of permanently mounted steps that get in the way in tight situations. If you have to park close to another vehicle in a storage lot, for example, there might not be enough clearance to deploy your steps. With other fold-down steps, this means you can't deploy the steps and now they are blocking your entryway. The MORryde steps can be easily attached when you need them and detached and stored when the situation calls for it.
Second, the MORryde steps are fitted securely to their frame, with no folding points like on the Brophy scissor steps or the TorkLift GlowSteps. This makes them extra sturdy and less likely to bounce or move when you step on them. The camper won't rock as you climb in and out and you won't feel as though you may take a tumble at any moment while on the steps.
Snap-on steps are typically installed on travel trailers and 5th wheels. The Quick Connect steps from MORryde have two brackets that mount beneath your camper's door frame. The paddle latches allow you to clip the steps onto the brackets and to detach them for storage inside your camper.
Step 1: Measure the Entry Height
Measure from the doorway threshold to the ground. For these steps to work, you will need an entry height between 35-1/2" and 44".
If you find that you have a smaller entry height, there are other step assemblies that fit entry heights ranging from 2-1/2" to 36". (See table below)
Step 2: Measure the Mounting Space
Measure the space beneath your camper's door frame. You will need a minimum distance of 1-3/4" from the bottom of the door frame to the bottom of the camper to attach the mounting brackets.
If, after taking your camper's measurements, you find that these steps will not work for you, use the table below to determine which part number you need.
| Mounting Space | Entry Height | etrailer Part Number |
|---|---|---|
| 1-3/4" | 21-1/2" - 27-1/2" | MR85HR |
| 1-3/4" | 27-1/2" - 36" | MR63RR |
| 1-3/4" | 35-1/2" - 44" | MR25HR |
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Steps are great! Exactly what I was looking for. Only drawback was the hardware to mount didn’t work properly. I had to get hardware that fit right. Other than that it’s good.
We bought a new trailer and could not access it because of the solid steps that came with it. So, fortunately, with the MORryde Quick Connect RV steps, we were able to address that issue and make accessing our trailer while it's parked possible and easy.
I was sent the wrong directions with the package. I got directions for the hinged type steps not the quick connect.
Customer service staff was easy to work with and order from. Advised on which rv steps would best fit our needs. Product arrived on time. Have not installed it yet and will next week.
These steps are very Durable and they added a sense of safety that our 1984 Kit Companion camper desperately needed! Easy to install - 15 minutes total! It didn’t come with the pins that keep the legs from sliding out. We purchased these at hardware store. The directions were not good either. For these 2 reasons we gave it 4 stars!
We are so pleased with your customer service and you quick response to help us when you learned of the problem- we will be telling all our camping and RV friends about you. Customer service is the top decision in most people’s decisions on where they shop, and you definitely have that perfected! Thank You!
VERY VERY well built. Sturdy and safe. Great USA made product. I made the right choice for my cargo car trailer.
Easy installation. Great product. Haven't traveled anywhere yet but this seems 100% better than the original steps. Safer than the block on uneven surfaces.
Really enjoy the new MORryde quick connect steps on my Rockwood Roo 233s. No more bouncing stairs. Dealing with etrailer.com has been a great experience.
Great product! Due to my “RV” door on my cargo trailer, the steps that fold in door would not work so I found these quick connect stairs. Love the stability of these steps. Very easy install.
MAJOR IMPROVEMENT over the factory fold-out steps. The stability improvement is incredible, not just for the steps themselves but for the entire camper due to the fact that these contact the ground. I prefer the quick connect style as opposed to the fold-in design due to the fact that there was no door trimming required. Construction and styling of the steps is top notch. Installation is super easy. Line up the brackets and make 4 marks, drill 4 pilot holes and attach with 4 included screws. So simple. Takes 30min or less from unboxing to installed. This is by far the best upgrade I've made to my camper so far. etrailer is awesome!!
It is definitely a great upgrade from the original steps. No more bouncing. I wished I had ordered the fold up version. I wasn’t sure it would fit with the specs online. No regrets. I just set the steps right inside the door.
Wrong instruction booklet but I’m sure I can install with out it
Gave it a 4 star because they sent installation directions for a hinged mount step and not the latch system I have. Yes, I can figure it out myself, but some hints or suggestions would have been nice.
I purchased slightly damaged stairs. I was able to repair and install them on our trailer. Thank you for your great products. Photo attached.
These are the nicest and sturdiest stairs that I have found on the market for RV's .
Ordered a different set from you had a kinds of problems but thse are perfect
all good. This ladder is awesome!!!
Condition: Missing Parts
Notes: Item is missing the screws and brackets. The fram is slightly bent on one side at the bottom. Otherwise unused.
Condition: Badly Dinged
Notes: There are dings and scratches on the steps. All hardware is included.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.