1. Home
2. RV & Camper
3. RV Slide Out Parts
4. Hydraulic Partsx

We do; the correct replacement for the 1510000236 is the Replacement Auto-Programmable Controller Panel #LC26TF.

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

Greetings David, thanks for reaching out. The Replacement 18:1 Tuson Motor for Lippert Through-Frame Slide-outs #LC125802 is the correct replacement for the Thomson 7828696. The #TUS24FR you mentioned is similar, but according to Lippert this is not…

Thanks for the info you listed. Based on that the correct replacement motor is the part #LC295380.

Hi Jenny, For a PowerGear slide out motor #524907 you would need the Replacement Gear Motor Assembly for Lippert Slide-Out #LC27VR that you were already looking at.

The Fixed Dual Rack Repair Kit #LC84FR goes on the left side of the slide as you look at the slide out from the outside of the camper. So on the drivers side it will be the front of the slide. The Floating Dual Rack Repair Kit #LC26VR is going to be…

We have had this question before and according to Lippert the replacement for your actuator and slide out motor 131903 is the Lippert Venture Actuator and High Speed Slide-Out Motor item #LC168956 or the Replacement 18:1 High Speed Motor Assembly…

Hey John, thanks for reaching out! Aside from the Motor #LC132682 operating slower than the Motor #LC295380, there shouldn't be any problems or possible damage because these have the same 18:1 gear ratio and power settings.

Is this an interior trim piece or a the skis that are on the outside of the slide out like what the part #SR68RR is designed to replace?

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

The piece you're referring to in the #LC26VR kit is called a "shoe". This part is plastic with foam pads on each end that helps cushion the motor bracket as it slides back and forth to either end of the track.

In regards to the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs, the float side is on the right part #LC26VR and the fixed is on the left part #LC84FR.