Viper RV Sewer Hoses
- Drain Hoses
- 20 Feet Long
- Viper
- 26 Mil - Extra Thick
Built for the on-the-road lifestyle of full-time RVing, these extra-heavy-duty, 26-mil-thick sewer hoses offer maximum protection from crushes, punctures, and UV rays when emptying your tanks. 4-In-1 clear elbow adapter fits 4 sizes of sewer inlets.
Features:
- Sewer hoses let you drain your RV's black-water and gray-water tanks at a dump station
- Ideal for full-time RV living
- 2 Separate hoses allow you to adjust the length to fit your setup
- Use standard 10' hose at most campgrounds
- Connect 10' extension hose if extra length is needed to reach dump station
- EZ Coupler 4-in-1 elbow adapter easily connects to the dump station's sewer inlet
- Fits 3" diameter slip and 3", 3-1/2", and 4" diameter threaded sewer inlets
- 90-Degree elbow keeps hose from sharply bending and wearing down
- Clear plastic lets you see when tanks are empty
- Extra-thick, 26-mil TPE resists crushing, punctures, and UV damage
- Internal wires help hose spring back into shape, even if stepped on
- Flexible and easy to manuever, even in temperatures below freezing
- Swivel fittings rotate to eliminate twisting and keep hose laying flat
- Internal seals help prevent leaking
- Hose collapses for storage
- Gray and red color
Specs:
- Hose diameter: 3"
- Hose length (each):
- Extended: 120"
- Collapsed: 50"
- 1-Year warranty
![Choose your hose length]()
These sewer hoses come with everything you need to empty your holding tanks at a dump station, particularly one that you're parked far away from. The 2 separate hoses let you adjust the length based on your setup. Use 1 hose when you're close to the dump station or connect both together for twice the length. Each extra-heavy-duty hose is made of 26-mil-thick TPE for maximum durability. The 90-degree elbow adapter prevents the hose it's attached to from bending too sharply at the sewer inlet, and because it's clear, it lets you see when the tank is empty too. The elbow adapter also makes it easy to connect to the dump station with its 4-in-1 fit capability.
Customizable Length Fits Every Trip
![2 Hoses]()
Two hoses are included - a standard 10' drain hose and a 10' extension hose - to give you up to 20' of length when connected together. A typical 20' hose can be bulky and difficult to stow in your RV. Even worse, waste can get trapped between the coils of longer hoses, causing nasty odors. With 2 hoses, you get the best of both worlds. Use the standard 10' drain hose to reach the sewer inlets at most campgrounds. Connect the included extension hose to get a full 20' of length to reach inlets that are further away. And when you're done dumping your tanks, you can separate the 2 hoses for easy storage in your RV.
4-in-1 Elbow Adapter Fits Any Sewer Inlet
![Valterra 4-1n-1 sewer adapter]()
The included 4-in-1 elbow makes connecting the hose to the dump station inlet fast and easy. The adapter is designed to fit 4 sizes of dump station inlets. It easily slides into 3" diameter slip inlets, and it can be screwed into a 3", 3-1/2", or 4" diameter threaded inlet.
![Valterra 90-degree RV sewer hose fitting]()
Also, the 90-degree design ensures that there isn't a sharp bend in the hose when you connect it to the dump station inlet, which makes for a longer lasting hose. And the clear plastic construction of the elbow makes it easy to see when the water moving through your system runs clear, signaling that your tanks are empty.
![Valterra 4-1n-1 sewer adapter installed]()
To hook up the adapter, slide or screw the elbow into the dump station sewer inlet, then connect the lug fitting on the end of the hose to the bayonet fitting on the adapter. It's that easy.
Extra-Heavy-Duty TPE Material Resists Crushing and Punctures
![TPE hose]()
The RV hoses in this kit are made of 26-mil-thick thermoplastic elastomers (TPE) to provide maximum durability when you're dumping your tanks. The material is puncture and abrasion resistant, so you don't have to worry about springing a leak if the hoses get damaged from being dragged on the ground. TPE can also handle both hot and cold weather. UV resistance protects the hoses from sun damage, but the material also stays flexible in temperatures as low as -30 F. Finally, the wiring that runs around the hoses helps them to retain their shape, even if crushed or stepped on.
Swivel Fittings Eliminate Twisting
![Valterra swivel lug fittings]()
The swivel fittings on each end of these hoses rotate independently. This means that, when you're screwing them onto the connection points, the entire hose will still lay flat. So when you're dumping your tanks, waste can easily flow to the sewer inlet. No twisting, no binding, no problem.
D04-0475 Valterra Viper Drain Hose with 3" Bayonet and Swivel Fittings for RVs - 4-in-1 Elbow Adapter - 20' Long x 3" Diameter - 26 mil TPE - Gray and Red
Item # D04-0475
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.