See what our Experts say about this Valterra RV Water Inlets

• Can Valterra Water Inlet Kit be Keyed Alike to RV Compartment Doors?
  Hey Tom, thanks for reaching out! The Valterra Lockable Dual RV Water Inlets # A01-2004VP can't be keyed to your current compartment doors, but you might be able to swap out the lock core with your current one if it has the same cylinder design. Does your current compartment have a locking cylinder like this one?
  view full answer...
• Replacing Water Inlet Check Valve For a 2003 Bigfoot 30MH27DSL Motorhome
  We do have the B&B RV Water Center # BM58MR which is similar to the Valterra # A01-2004VP unit you found. It does have the brass check valve on the city water connection. The Check Valve # P23402LFVP you found is designed to attach in line with 1/2" female and male pipe thread connections. It does not have a method for attaching it to a water inlet door.
  view full answer...
• Recessed and Lockable Gravity Water Fill Ports For a Camper
  We actually have a selection of recessed gravity fill ports that you can use on your camper that are lockable. I will list them for you below. Slide-Out RV Gravity Fill Inlet with Lockable Latch - Polar White # 37237525 Valterra Lockable RV Gravity Fill Water Inlet - White # A01-2002VP Valterra Lockable RV Gravity Fill Water Inlet - Black # A01-2002BKVP Valterra Lockable Dual RV Water Inlets - City Water and Gravity Fill - Plastic Valve - White # A01-2004VP Valterra Lockable Dual RV Water...
  view full answer...
• Lockable Cover for 2018 Keystone Bullet Crossfire Water Inlet
  We have one smaller locking hatch than the Valterra City Water Inlet and Lockable Hatch # A01-2004VP which fits rough opening cutouts of 5-7/8" wide x 4-3/4" high. It is the Valterra Universal Inlet and Lockable Hatch # A01-2002VP. It has overall dimensions of 6" wide x 6-1/2" high and fits both 4-1/4" wide x 4-3/4" high and 4" wide x 3" high cutout openings. If that doesn't work, can you give me the dimensions of the rough opening you are looking to fit? We may need to get more...
  view full answer...
  
• Check Valve for Valterra City Water Inlet # A01-2004VP
  We have check valves like the part # CAM23303 which will fit the 1/2 inch diameter fitting of the Valterra City Water Inlet and Lockable Hatch for RVs # A01-2004VP but it does not come with a check valve.
  view full answer...
• Locking Water Hatch Compatibility with Current Cutout on 2018 Keystone Bullet
  For your 2018 Keystone Bullet, I don't know what cutout dimension is behind the 7-1/2 by 5-1/4 inch mounting of the # A01-2001VP. The lockable cover that replaces this is the Valterra City Water Inlet and Lockable Hatch for RVs - Plastic - White - Gravity Fill # A01-2004VP. This system has overall dimensions of 7-5/8" wide x 6-1/2" high but it only requires a cutout of 5-7/8 inches by 4-3/4 inches so enlarging the opening may not be necessary.
  view full answer...
• How to Determine Water Hatch Inlet for RV
  While we do have replacement water hatch inlets available (but not gas hatches), there are none for specific RVs so we wouldn't know if they are the same as newer models. In order to determine the correct water inlet you just need to know your water line and cut out size. For example, if it was a city water inlet and you had a 1/2" MPT tank connection and your cut out was 5-7/8" wide x 4-3/4" high you would use the Valterra City Water Inlet and Lockable Hatch for RVs # A01-2004VP. I...
  view full answer...
• What Kind Of Hose To Use With The Gravity Fill Connection On The A01-2004VP
  For the gravity fill inlet on the # A01-2004VP you can use really any flexible 1-1/4" diameter (or smaller) hose. That is, as long as it is made of non-toxic plastic that is safe for drinking water. Unfortunately, we no longer carry any hoses with a 1-1/4" diameter. I was able to find a picture showing an example of a compatible 1-1/4" hose which I have included below. I imagine you could find something like this at a local hardware store or plumbing supply store.
  view full answer...
• Does the Water Inlet Panel # A01-2001VP Fit a 2000 Chinook?
  While we did provide the cutout dimensions for that neighbor that you are referring to, we did not hear back from them to confirm whether the Valterra City Water Inlet for RVs in White # A01-2001VP fit their 2000 Chinook. The size you need truly depends on your cutout. If you have a 5-1/2" x 3-1/2" cutout for your inlet panel, these models fit what you have. Like the previous answer, you may have to re-route your hoses to match your inlet depending on your city water inlet's position. As...
  view full answer...

Do you have a question about this RV Water Inlet?