Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Throw this storage cover over your truck camper to protect it from rain and snow while you're storing it in between camping trips. Cover wraps around the bottom corners and secures with integrated straps so it won't flap in the wind.
Features:
Specs:
You're worried about your truck camper getting wet and dirty in storage before your next camping trip. Whether you're storing your camper in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your camper will be protected. When you keep your camper covered during the winter, you are less likely to need to wash and wax it in between trips. And if you want to trade your camper in for a newer model later down the road, this cover will help maintain that resale value.
The 3-ply SFS AquaShed top panel reduces moisture buildup that can damage your camper over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your camper. And when the rain stops, the fabric dries quickly to minimize the development of mold and mildew. The top panel blocks the roof of your camper from mild sunlight as well, protecting the cover from cracking and fading.
How to Measure Your Truck Camper
To determine if this cover will work for you, measure the overall length of your camper from the front to the rear bumper, making sure you're accounting for any spare tire carriers and ladders on the back. Then measure the overall height from the bottom of the camper to the top. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.
Securing the Cover onto Your Camper
The included ladder cap helps prevent the cover from splitting on that area of the camper so install it first. Then unroll the cover and carefully spread it evenly around your camper, making sure you don't pull too hard and tear the fabric. Wrap the elasticized hem around the bottom corners of your camper and pull on the cinch ropes on the front and rear of the cover. These remove any excess slack in the material, especially if your camper is slightly shorter in length. Then toss the weighted straps underneath your camper to the other side and buckle them together, which keep the cover secure on your camper and prevents it from flapping in the wind and damaging the paint job.
And if you need to grab supplies, you can use the zippered panel on the back to easily access the interior of your camper without having to completely remove the cover.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Paul S.
3/14/2022
update: Although Id give etrailer ten starts for helpful, prompt,proactive customer service, the cover failed. I had it on my camper for just under 1 year and it was reduced to shreds by the sun. I had it stored outside in So Calif, not a particularly hostile environment. just typical direct sunshine and temps as high as 90s seldomly, usually in 70s. Little wind. anyway the thing was in shreds literally 1 week before the one year anniversary. It had a 2 yr warranty and to their credit, Adco sent me a new one. So now Ive got another year to go before I have to deal with it again. I wont buy this one next time.
Mike L.
11/9/2018
A little further down on the product page, we list the length and height dimension of the cover Overall dimensions: 213 long x 104 wide x 104 tall Fits truck campers 8 - 10 long with queen size bed. We also provide a diagram showing the important dimensions.
Rudy
8/4/2023
I have rips on the back lower area. The rest of the cover seems ok. This is after an extreme winter. I may have to get another one next year.
David A.
10/26/2021
This cover continues to hold up well after 2 winters. Did develop small tear due to a sharp edge on camper. Repaired with duct tape and put foam on sharp edge. I would still purchase again.
Katrina B.
3/23/2023
Awe no! You should have kept it! This item has a 2 year warranty.
Rich
11/11/2022
Worked well over the winter months and just put it on again for this winter and it still looks good as new
Jenny N.
12/19/2022
Sounds like the wind did a number on the cover. If you still have the cover then it does have a two-year warranty and I can send you the details if you are interested. When it comes to wind and the sharp corners of the trailer, we have found that using pool noodles on the sharper edges of the trailer can help the cover to have a longer life.
Jenny N.
10/26/2022
You mentioned that the RV cover was peeling apart and that you had sent in pictures. I apologize as we did not receive the pictures, however, I am happy to take a look at them.
Brooke M.
9/7/2021
Thank you for the review! Our Customer Service Team will be reaching out to you in the near future about the missing items.
Do you have a question about this RV Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
10/15/2026
That's no good, Richard! Our Customer Service folks are already working on getting the proper replacement sent out!