Buyers Products RV Backup Camera System w/ Night Vision - License Plate Mount - 7" Screen

Buyers Products RV Camera System - 3378883010

Whether your campsite is hit by a rainstorm or a cold front, this waterproof camera and heated lens will withstand harsh environments. Built-in microphone and speakers help you communicate with a friend outside your RV as you back into a tight space.

Features:

• Wired backup camera system improves rear-view visibility for your RV or camper
  • Minimizes blind spots and helps prevent accidents
  • Supports up to 3 wired cameras (additional cameras sold separately)
• Included CMOS camera creates digital video in full color
  • 120-Degree viewing angle gives you optimum visibility
  • Heated camera lens prevents frost build-up in cold climates
• 8 Infrared LEDs surround the camera lens to provide nighttime vision up to 45'
• 7" Full-color LCD monitor has color-coded, rear assist marker lines that show distance from other objects
  • Brightness, color, contrast, and image orientation can be easily adjusted
  • Removable sunshade reduces glare on monitor screen
• Integrated microphone and speaker make it easy to get help backing up
  • Microphone on camera picks up your friend's voice outside the RV
  • Speakers on monitor let you clearly hear your friend's instructions
• Durable metal housing is waterproof and dust resistant
  • IP68 rated to protect against dust and water submersion in up to 5' for 30 minutes
  • Impact rated at 20G for vibration and 10G for shock
  • Sealed thread-and-collar 4-pin connector keeps dirt and moisture out
• Bolt-on installation with existing factory hardware - drilling required
  • Monitor sticks onto, recesses into, or permanently mounts to your dashboard
  • Camera installs directly to your RV's license plate with existing factory hardware
• 1 Camera, monitor, 3 monitor mounts, wireless remote control, wiring harness, and 65' cable are included

Specs:

• Monitor dimensions: 7" wide x 4-3/4" tall x 7/8" deep
• Screen size: 7"
• Camera dimensions: 7-1/2" wide x 1" tall x 1" deep
  • Mounting hole spacing (center to center): 7"
• Pedestal mount dimensions: 4" wide x 3" tall x 3-3/4" deep
• U-bracket dimensions: 7-3/8" wide x 3-1/2" tall x 1-3/8" deep
  • Mounting hole spacing (center to center): 5"
• Recessed mount dimensions: 7-15/16" wide x 5-5/8" tall x 13/16" deep
  • Mounting hole spacing (center to center): 4-3/4"
• Resolution:
  • Monitor: 800 x 480
  • Camera: 656 x 492
• Voltage: 12V - 24V DC
• Cable length: 65'
• 2-Year warranty

After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wired, license plate-mounted backup camera system gives you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.

Easily Communicate from Outside Your RV

Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.

Avoids Collisions White Backing Up

No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.

And because this camera has 8 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 45' should you arrive at the campsite after dark and need to back up into your parking spot.

Withstand Multiple Climates and Environments

If there's a torrential downpour, the waterproof, IP68-rated camera will be protected against water submersion for up to 30 minutes, and the sealed thread-and-collar, 4-pin connector ensures that moisture won't seep in. If you're driving through rough country roads, the camera will resist dust and dirt and prevent malfunction due to excess shock and vibration. And if it freezes over while you're camping up north, the heated lens prevents ice from building up on the camera, which means you won't need to defrost it by hand.

Installs Onto Your Dashboard and License Plate

This camera system includes 3 different mounting options for the monitor, depending on how you want to display it on your RV's dashboard. If you want a permanent mounting solution, drill the pedestal mount or the U-bracket into the dashboard. Or, if you want to be able to re-position the monitor later on, you could stick the pedestal mount onto the dashboard with the included adhesive backing. And if you want the monitor to have a custom, factory look, recess the third mount into your dashboard. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.

The slim camera housing installs directly to your RV's license plate for a clean, out-of-the-way look. Using your license plate's existing mounting holes, bolt the camera down with the existing factory hardware. Then once the connections to power, ground, and the monitor have been made, wire the camera to the reverse lights if you solely want it to back up out of tight spaces. Or wire it to ignition power if you want to keep an eye on your rig while you're driving down the highway.

8883010 Buyers Products Hardwired RV Backup Camera for RVs - Night Vision - License Plate Mount - 7" Screen

Installation Details