bing tracking image
  1. Watersport Carriers
  2. Malone
  3. Kayak
  4. Roof Mount Carrier
  5. Aero Bars
  6. Elliptical Bars
  7. Factory Bars
  8. Round Bars
  9. Square Bars
Malone SeaWing Kayak Roof Rack w/ Load Assist and Tie-Downs - Saddle Style - Clamp On
Malone

Malone SeaWing Kayak Roof Rack w/ Load Assist and Tie-Downs - Saddle Style - Clamp On

In Stock
$242.95
Retail:$269.95
You Save: $27.00
Watersport Carriers
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This saddle-style kayak carrier with lift assist lets you easily load and transport 1 kayak on your roof rack. The slide-out lift assist lets you push the kayak onto the carrier without lifting the boat over your head. Great Prices for the best watersport carriers from Malone. Malone SeaWing Kayak Roof Rack w/ Load Assist and Tie-Downs - Saddle Style - Clamp On part number MPG113MD can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (112)
  • Q & A (0)
  • Photos

Malone Watersport Carriers

  • Kayak
  • Roof Mount Carrier
  • Aero Bars
  • Elliptical Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Saddle-Style
  • Malone
  • Clamp On
  • Load Assist
  • Rear Loading

This saddle-style kayak carrier with lift assist lets you easily load and transport 1 kayak on your roof rack. The slide-out lift assist lets you push the kayak onto the carrier without lifting the boat over your head.


Features:

  • Saddle-style carrier lets you transport 1 kayak on your roof rack
  • Integrated rear-loading, lift assist lets you easily load a large kayak onto your vehicle's roof
    • Slide the lift assist out and rest the bow of your kayak on the raised platforms
    • Push the kayak onto your vehicle's roof and then slide the lift assist back under the carrier
  • Cradles with rubber padding hold your kayak on its hull, protecting it from scratches and scuffs
  • Tie-down straps and bow/stern tie-downs secure your kayak to your roof rack and to your vehicle
    • Anchor kit (sold separately) creates temporary mounting points for bow/stern tie-downs
  • Quick and easy clamp on installation on most crossbars - no tools required


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
  • Carrier capacity: 1 kayak
  • Weight capacity: 75 lbs
  • Dimensions:
    • Carrier: 27-1/2" long x 7-3/16" wide x 4-3/4" tall
    • Load assist: 25-1/8" long x 10-1/2" wide x 5" tall
  • Strap length (each): 11'
  • Carrier weight: 15.6 lbs
  • Limited lifetime warranty


Malone Crossbar Specs

Saddle-Style Carrier w/ Rear-Loading Lift Assist

Saddle-Style Kayak Carrier Load Straps InstalledMalone Load Strap Loops

This rear-loading, saddle-style carrier has an integrated lift assist to help you load a large kayak onto your vehicle's roof. To load a kayak onto the carrier, simply slide the lift assist out from under the rear cradle and set your kayak's bow on the raised platforms. Then, raise the boat's stern to your chest and push the kayak over the lift assist and onto the carrier. Once the kayak is positioned where you want it, slide the lift assist back under the rear cradle.


Malone SeaWing Padding

The Malone SeaWing's V-shaped cradles are lined with rubber padding to protect your boat from scratches and scuffs while loading and during transport. This padding also creates friction while you're pushing your kayak onto the carrier, making it less likely that you'll push the kayak too far and potentially have it fall off the carrier and hit your vehicle.


Load Straps and Bow/Stern Tie-Downs

Malone Kayak Carrier Bow Strap

The carrier includes 2 cam-buckle straps to secure your kayak to the carrier. Cutouts on the outside edge of the SeaWing help keep the straps in place while loading and transporting your kayak. A set of bow/stern tie-downs are also included to secure the kayak to your vehicle's front and back bumpers or underneath the hood. A foam anchor kit (sold separately) provides extra security by allowing you to attach the bow/stern tie-downs to the creases in your vehicle's hatch and hood.


Tool-Free, Clamp-On Installation

Malone saddle-style installed

The carrier clamps to most crossbars without the need for tools. Simply set the carrier on your crossbars, slide the mounting brackets over the bolts, and secure them with the T-knobs.



MPG113MD Malone Sea Wing Stinger Combo Kayak Carrier and Stinger Load Assist - V-Style - Universal Clamp On

Item # MPG113MD

Installation Details MPG113MD Installation instructions


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.5

111 reviews
This saddle-style kayak carrier with lift assist lets you easily load and transport 1 kayak on your roof rack. The slide-out lift assist lets you push the kayak onto the carrier without lifting the boat over your head.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Excellent product. Easily installed



by:

they were what they said they were, gre at



by:

Great Quality



by:

Delivery was really fast and the product quality is outstanding. Thank you it was a pleasure to be a first time customer.



by:

Nice design, seem durable, easy to install and use.



by:

easy install, easy order and will be just what we need to haul our kayaks to the lake!


25
111
Show More Reviews

See what our Experts say about this Malone Watersport Carriers

  • Solution for Carrying 2 Kayaks on 2018 Mazda CX-5 With Factory Roof Rack
    You can use a carrier with load assist like the Malone SeaWing Kayak Carrier # MPG113MD or the Malone DownLoader Kayak Carrier # MPG114MD-351XL with your factory crossbars that do not extend beyond the feet. The problem you have is the lack of space to use two. The best solution for carrying two kayaks on your 2018 Mazda CX-5 would be to use the Thule Compass Kayak and SUP Carrier w/ Tie-Downs # TH890000. Although it does not have load assist, it will fit on your existing crossbars and...
    view full answer...
    Image 1 for
  • Could Two Malone SeaWing Kayak Carriers # MPG113MD Fit on 2018 Nissan Rogue
    What you'd want to do is compare the width of your two kayaks as they sit next to each other to the length of the crossbars on your roof. Since the Malone SeaWing Kayak Carrier and Load Assist # MPG113MD can overhang pas the ends of the crossbars you shouldn't have a problem at all fitting two of them next to each other but without knowing how wide your crossbars and how wide your kayaks are it's harder to say.
    view full answer...
  • Will Malone SeaWing Kayak Carrier and Load Assist Avoid Contact With Satellite Radio Antenna
    The Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs - Rear Loading - Clamp On # MPG113MD will allow you to mount the carrier to one side of your vehicle to avoid the antenna. When your kayak is loaded, the height of the rack and mount as well as the curve of your kayak should easily clear a Satellite XM radio antenna or at lease be able to avoid contact with it on your 2017 Subaru Outback Wagon. The load straps have padded buckles to prevent any scratching and can be adjusted...
    view full answer...
  • Recommended Crossbars for a 2020 Honda Ridgeline w/ a Leer Cap and Thule Tracks
    Hey Kent, thanks for the information! Yes, the Malone SeaWing Kayak Roof Rack w/ Load Assist and Tie-Downs item # MPG113MD will indeed work for your kayaks. You will need to tilt your Oldetowne Flint fishing kayak when you mount it though. It looks to be a bit wider than the carrier. For a set of crossbars and towers that will attach to the Thule tracks on your Leer truck cap, you'll want the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars item # Y02-490B-NT. These 59"...
    view full answer...
  • Can I Use The Thule Hullavator On Factory Crossbars With No Overhang?
    The Thule Hullavator # TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that have some overhang. Since your 2023 Subaru Outback already has the factory installed rails running front to back, you will be able to mount crossbars using these rails. I recommend the Yakima JetStream Roof Rack, which will consist of the following parts: Yakima...
    view full answer...
  • Is There A Minimum And Maximum Kayak Width With The Malone MegaWing Or SeaWing
    With both the SeaWing # MPG113MD and MegaWing # MPG207 being saddle-style carriers there isn't really a minimum or maximum width like you'd have with a J-Style carrier. You're really only limited by the length of the tie-down straps and weight capacity of the carriers.
    view full answer...
  • Can Two Malone SeaWing Kayak Roof Rack Fit on OEM Crossbars of 2020 Kia Sportage
    If you offset both of the Malone SeaWing Kayak Roof Rack w/ Load Assist and Tie-Downs # MPG113MD on the furthest parts out of the crossbars you'd be able to fit two of these on the roof of your 2020 Kia Sportage at the same time.
    view full answer...
  • Can Malone SeaWing on Round Crossbar be Prevented from Rotating on Bar
    Round crossbars are a challenge since they do allow roof accessories like the Malone SeaWing part # MPG113MD to rotate on them pretty easily. Getting the hardware tighter can help somewhat but there's really no way to totally prevent the rotation. Taking extra care when setting the kayak onto the carrier is really the only thing you can do.
    view full answer...
  • Should you Use the Malone SeaWing or the MegaWing for a 75-LB Kayak
    The Malone SeaWing with Stinger Load Assist, part # MPG113MD, has a maximum capacity of 75 pounds. On the other hand, the MegaWing has a capacity of 150 pounds. I recommend the MegaWing. The reason is that though the SeaWing can technically handle your 75-pound kayak, that's pushing the carrier to its absolute limit. It can handle it, but when you push anything to its limit, they stand a much higher chance of failing (breaking) sooner. The MegaWing is a much safer option as 75-pounds is...
    view full answer...
  • Does Malone SeaWing Kayak Carrier Load Assist w/ Tie-Downs # MPG113MD Fit 2019 Toyota Highlander
    The Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD does fit the factory crossbars of your 2019 Toyota Highlander and as long as you load the kayak/canoe to either side of the shark fin antenna you'll be fine. The Toyota Highlander I attached pictures of and an install video for has a very similar antenna and we were able to load to either side of it.
    view full answer...
    Image 1 for
  • Can I Use Thule Hullavator On Factory Bars and How To Determine Vehicle Clearance When Loading Kayak
    Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading part # TH898 can be installed on factory cross bars as long as they are square, aerodynamic or round bars. You do want to have 4-8" of bar overhang in order for the Hullavator to be lowered when you load the kayaks. I have attached a photo to help explain. If you do not have the appropriate amount of clearance the Hullavator may come into contact with your RAV4 in it's load assist position. If your factory...
    view full answer...
    Image 1 for Image 2 for
  • Can Tow Malone SeaWings Be Mounted Side-By-Side To Haul Two Kayaks On A 2018 Toyota 4Runner
    Yes, the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs - Rear Loading - Clamp On # MPG113MD can be placed side by side. We actually have a picture of this on the product page that I've also attached below. The carriers are 27-1/4" in width so I recommend going with the 60" Yakima Crossbars # Y00426 and # Y33TR to ensure a comfortable fit for both kayaks. That being said, due to the design of your 12' Hobie Passport kayaks I do not recommend using the # MPG113MD. Since the cradles...
    view full answer...
    Image 1 for
  • Can I Put Two Malone SeaWing Kayak Carriers On My Roof?
    The Malone SeaWing # MPG113MD is about 27-1/2" wide. When you mount these on your roof, just be sure to slide each SeaWing as close to the edge as possible so they both fit!
    view full answer...
  • OEM Crossbars or Malone AirFlow2 with Malone SeaWing On Our 2020 Honda Odyssey?
    I recommend using the eTrailer Raised Side Rails # e99034 then use the Malone Air Flow 2 # MPG216 because you can then position the bar wherever you like on your roof to meet the needs of you and the Malone SeaWing # MPG113MD. Having the space to adjust the roof rack rails is much better than having fixed points on the roof. Fixed points limit you to accessories in some cases but using the Malone Air Flow 2 with our Raised side rails is going to give you a clean look, install and allow...
    view full answer...
  • Can I Use the Thule Hullavator on a Gobi Safari Style Rack on a 2005 Jeep Wrangler
    I may have a solution for you, but the Thule Hullavator # TH898 requires that your crossbars extend 4"-8" outside of the side rails, so your safari style rack won't work for this carrier. Instead, you may want to consider using the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs - Rear Loading - Clamp On # MPG113MD, which has a load assist feature and can be used on the round bars of your 2005 Jeep Wrangler TJ with a safari rack and soft top. I've linked a short review video...
    view full answer...
    Image 1 for
  • Could Two Malone SeaWing Kayak Carrier with Load Assist fit on Bars of 2015 Subaru Outback Wagon
    If you mounted two of the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD on the outside most portion of your load bars you'd be able to fit both on the roof easily based on the dimensions you gave of what you have.
    view full answer...
  • Kayak Load Assist Options for Malone SeaWing Kayak Carrier
    The Stinger Load Assist # MPG350 actually uses the mounting hardware from the Malone SeaWing Kayak Carrier # MPG107MD to secure to the crossbars so you would have to remove the Stinger with the kayak loaded which isn't something I recommend using. If you want the Stinger for both sets of the SeaWing then you'll need 2 sets of the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD. We do have some alternative options so that you're only using 2 sets of the SeaWing without...
    view full answer...
  • Which Malone Kayak Carrier Will Work Best For My Hobie Outback Kayak & My 2022 Subaru Forrester?
    The 75-lbs weight limit for the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs # MPG113MD is the total weight limit that rack can handle (both pieces). Since you mentioned that your Hobie Outback weighs 85-lbs, you're going to want to use the: -Malone MegaWing Fishing Kayak Carrier with Tie-Downs # MPG207, which has a maximum weight capacity of 150-lbs. This is the much better option and will ensure that you have plenty of capacity for your Hobie Outback. Attached are a...
    view full answer...
  • Are The Rhino Rack Vortex Aero Bars Compatible With The Malone Seawing?
    The Malone SeaWing # MPG113MD will fit round, square, aero, elliptical, and most factory crossbars. So it will work with your Rhino Rack Aero Crossbars. Just make sure that the measurement from the center of the front crossbar and the center of the back crossbar is at least 24 inches. I've included a video for you to watch to see how it installs and how it works! Be sure to check that out!
    view full answer...
  • Will the Malone SeaWing Fit on Thule Roof Rack Crossbars
    Yes. The Malone SeaWIng # MPG113MD is designed to fit on square, round, aero and most factory crossbars, so this system will fit on your Thule crossbars that are 3-1/2" wide.
    view full answer...
  • Can Two Thule Hullavators Be Used On A 2021 Toyota RAV4?
    I have a different kayak carrier option for you, but the Thule Hullavator # TH898 you mentioned are 36" long each and while a bit of them will hang over the end of the crossbars the longest crossbars available for your 2021 Toyota RAV4 are 55" so you will not have enough room. Instead I recommend going with the Hullavator on one side of the vehicle, and a standard carrier such as the Malone SeaWing W/Load Assist # MPG113MD one the other side as it is much lighter and quite a bit narrower. The...
    view full answer...
  • Recommended Kayak Carrier For Native Slayer Propel 10 Fishing Kayak and Yakima Jetstream Bars
    I really like the Malone MegaWing Fishing Kayak Carrier with Tie-Downs - V-Style - Clamp On - 150 lbs # MPG207 you were looking at if you're ok with loading your kayak from the rear of the vehicle, and it will fit on your Yakima Jetstream bars. It's a simple to use and install kayak carrier that won't break the bank and it will work well with your Native Slayer Propel 10 kayak. With that said, I actually recommend using the Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs -...
    view full answer...
  • Will the Malone SeaWing w/Load Assist # MPG113MD Fit My 1-1/4" Square Crossbars?
    Yes, the Malone SeaWing and Load Assist # MPG113MD will fit your 1-1/4 inch Thule square crossbars.
    view full answer...
  • Can the Hullavator be Used on a 2019 Mazda CX-5 with Factory Crossbars
    The Thule Hullavator Pro, part # TH898, requires some amount of the crossbar to extend past the feet. It needs to be between 4" and 8". The factory crossbars on your 2019 Mazda CX-5 don't seem to have this extension. Instead, I recommend using the Malone SeaWing with Load Assist, part # MPG113MD. It's a rear-loading carrier as opposed to the side-loading Hullavator. It doesn't have the gas struts, but it greatly eases the burden of lifting the kayak. I've linked to a video review of it below.
    view full answer...


< Previous
123. . .4



Do you have a question about this Watersport Carrier?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Hayden R
Installed by:
Hayden R
Employee Daron K
Edited by:
Daron K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Kyle M
Video by:
Kyle M
Employee Jonathan S
Written by:
Jonathan S
Employee Jessie B
Updated by:
Jessie B
Employee Isabelle B
Updated by:
Isabelle B
Employee Ashley K
Updated by:
Ashley K
Employee Clayton O
Test Fit:
Clayton O
Employee Evangeline M
Test Fit:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<