See what our Experts say about this Inno Roof Rack

• Recommended Square Bar Roof Rack Mounts For Ski and Snowboard Rack for 2007 Saab 9-3
  For your 2007 Saab 9-3 with factory rails, I recommend the Evo Raised Rail Feet for Thule Crossbars - Factory Raised Rails - Qty 4 # TH710401 which is compatible with the bars you mentioned, that are often simply referred to as square bars even though they are rectangular by measurement. I also recommend the Thule One-Key System Lock Cylinders - Qty 4 # TH450400 for increased security. The manufacturer suggests using 50 inch bars which have been discontinued with this system. You can...
  view full answer...
  
• Is There Square Crossbar that Can Fit Thule 460 Foot
  Hey Dar, so I have good news. The Inno square bars are the exact same dimensions as the old Thule bars so for a set that would fit the 460 feet you have you could use the part # INB127 for a 50 inch set.
  view full answer...
• Thule Roof Rack Recommendation for 2012 Toyota Camry
  For a new Thule roof rack that fits your 2012 Toyota Camry the Wingbar Evo rack part numbers # TH711420, # TH710501, and # TH145149 would be a great choice confirmed to fit the vehicle and the bike racks you have as well as long as they can fit aero shaped bars.
  view full answer...
• Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar Rack
  Thule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options. For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
  view full answer...
• Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan Maxima
  The SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
  view full answer...
• Roof Rack Capacity for a 2017 Ford Fiesta
  The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
  view full answer...
• Roof Rack Recommendation for 2008 Honda Fit for Carrying Kayak Carrier
  For your 2008 Honda Fit the Inno roof rack part numbers # INB127, # INSUT, and # INK219 is a confirmed fit and would do a great job carrying a kayak carrier. For the carrier we have the Thule Hullaport part # TH849000 which will do a great job and is compatible. It's padded, can fold down when not in use, and can be expanded to carry a second kaya if ever needed.
  view full answer...
• Roof Rack Recommendation for 2006 Chevy Uplander
  Thule does not make a roof rack solution that fits the naked roof versions of the 2006 Chevy Uplander. Closest thing would be the Inno brand roof rack that consists of part numbers # INB127, # INSUT, and # INK585. This won't reuse any of your Thule roof rack but your roof carriers will fit this same square bar style of rack that you had.
  view full answer...
  
• Cost Effective Roof Rack Recommendation for 2011 Honda Accord
  What we've found with the Sportrack Semi-Custom roof racks like the part # SR1002 is that they don't always fit the best. Reason being they are designed to fit as many vehicles as possible which means they don't fit everything perfectly. The price makes these hard to not be tempted by, but your best option is a fully custom fit roof rack like the Inno part # INB127, # INSUT, and # INK745 otherwise you'll have to get somewhat creative to get the Sportrack to fit right.
  view full answer...
• Foot Pack And Fit Kit For Mounting Square Roof Rack Bars On A 2024 Toyota RAV4 With Flush Rails
  Hi James! You are correct in what you are needing for your 2024 Toyota RAV4. Well, as long s you currently have square bars from a previous Inno or Thule roof rack and your RAV4 has factory flush mounted rails on the roof (this give you those fixed mounting points). Not sure why you couldn't get to the fit kit, but I have both parts linked below for you: Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR Inno Feet for Square Crossbars - Track Systems...
  view full answer...
• What Foot Pack Can I Use to Fit My Older Thule Square Bars on My 2014 Subaru XV Crosstrek?
  If you have older, pre-channel Thule SquareBars, I do have some option for you. If you happen to have raised factory rails on your 2014 Subaru XV Crosstreck, a compatible foot pack that will work is the Inno Feet for Square Crossbars - Raised Side Rails # INFR. This is because the Inno Square Crossbars like # INB127 have the same 7/8" tall x 1-1/4" wide dimensions as the Thule bars. With that being said, there is no solution if you have a bare roof. The only other option is to purchase...
  view full answer...
• Roof Rack Recommendations for the Thule Hullavator # TH898 on a 2010 Toyota FJ Cruiser w/Bare Roof
  The absolute best option to mount a Thule Hullavator # TH898 onto your 2010 Toyota FJ Cruiser is by using Inno Square Crossbars. The length of the Inno Square crossbars you need depends on the measurement between the top of your driver's-side door surface to the top of your passenger's-side door surface. This is where the Inno Feet # INSUT mount onto your roof to hold up the crossbars. For example, for the Inno Square 50" Crossbars # INB127 to be the correct size for the Hullavator to...
  view full answer...
  
• What Roof Rack is Compatible with My 2015 Toyota Camry's Bare Roof?
  For a great economic option that will securely fasten to your bare roof of your 2015 Toyota Camry LE, I suggest the following parts: - Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 # INB127 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK872 With this roof rack system, you can leave the crossbars on after installation even when they are not in use. However, I recommend removing the...
  view full answer...
• Roof Rack Compatible With The Most Roof Mounted Accessories
  The majority of rooftop mounted accessories such as bike racks and kayaks carrier are universal meaning that a Thule bike rack will work on a Yakima roof rack and vice versa. If you are looking for a roof rack that is compatible with the greatest variety of rooftop mounted accessory, I recommend using the Inno Square Crossbar System part # INB127, part # INSUT, part # INK758 as square crossbars are generally compatible with a greater variety of rooftop accessories in comparison to round/aero...
  view full answer...
• Installation Method for Inno Square Bar Roof Rack on 2016 Lexus GX 460
  If the flush roof side rails on your 2016 Lexus GX 460 do not have a fixed-point mounting system, but rather have tracks like those shown in the linked photo, then the rack crossbars' position will be adjustable. If you see one specific mounting point in the rails then this means the car is intended for a fixed-point rack installation. This Inno rack, composed of parts # INB127, # INTR and # INTR134, works for both roof configurations.
  view full answer...
  
• Roof Rack For 6th Generation Honda Accord (1998) Sedan
  The sixth generation started with the 1998 model year per my research, so if yours is the sixth generation you'll need a roof rack that fits the '98 models. There is one option for that, from Inno: - Inno Square Crossbars # INB127 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK249
  view full answer...
• Installing an Inno Roof Rack on a 2007 Saturn Ion
  The Inno Roof Rack with bar part # INB127 will install its clamps over the trim into the door of the vehicle. Your fit kit, part # INK124 will hook over your door frame and install the foot pack into the bases over the side of your roof's lip. I've included the illustrations from the instructions as a point of reference to how this should look installed. I've included an installation video for the 2017 Nissan Maxima so you can see an installation process on a similar 4 door sedan.
  view full answer...
  
• Is It Okay To Have The Crossbars Not Perfectly Level On My Roof?
  It isn't uncommon at all to have crossbars # INB127 aren't perfectly level. That being said, this won't pose a problem when loading up accessories.
  view full answer...
• Carrying A Previous Generation Thule Hullavator On A 2011 Subaru Forester
  Your least expensive option would be to go with an Inno roof rack. Your older Thule Hullavator was designed to go with either square crossbars or round crossbars. The Inno rack uses square crossbars that are the same dimension as Thule's square crossbars. Your rack will consist of the following; Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127 or Inno Square Crossbars - Steel - Black - 58" Long - Qty 2, part # INB147 and Inno Feet for Square Crossbars - Raised Side...
  view full answer...
  
• Inno Roof Rack Fit on 2016 Lexus GX 460
  The Inno square bar roof rack for your 2016 Lexus GX 460 with flush-mounted roof siderails does consist of parts # INB127, # INXP and # INTR152 and it is a complete roof rack system. No other parts are needed to install it. The crossbar spacing for this system on your Lexus is adjustable and the maximum bar spacing is 49-inches between bar centers. You can check the spacing of the installation hardware on your Thule cargo box to confirm that it will be compatible with this bar spread....
  view full answer...
• 2006 Toyota Corolla Roof Rack ad Kayak Carrier Recommendations
  I have the perfect solution for transporting a kayak on the roof of your 2006 Toyota Corolla! I recommend using the Inno square bar roof rack (parts listed below) with the etrailer J-Style Kayak Carrier # e98878 because they both come with everything you need and they have good quality at a great price-point. Inno Roof Rack Parts 50" Square Crossbars - # INB127 Feet for Square Bars - # INSUT Fit Kit - # INK701 I'm attaching some installation videos of these kits for you to check out.
  view full answer...
• Recommended Roof Rack for 2010 Dodge Caliber
  I recommend using the Inno Roof Rack Kit for Dodge Caliber that uses parts # INB127, # INSUT, # INK555 which will give you a nice roof rack at a good price. The Inno kit uses durable square crossbars and will attach to naked roofs to provide you with a solution that allows you to carry cargo carriers, ski racks and bike racks, plus a variety of other roof rack mounted accessories. I've linked a short review and installation video of this kit for you to check out.
  view full answer...
• What Inno Square Bars do You Carry over 50 Inches Long for My 2022 Chevy Equinox?
  Yes! We do carry longer Inno Square Crossbars than the # INB127. For longer sizes, here is what we carry: - Inno Square Crossbars - Steel - Black - 58" Long # INB147 - Inno Square Crossbars - Steel - Black - 65" Long # INB165 - Inno Square Crossbars - Steel - Black - 71" Long # IN434 - Inno Square Crossbars - Steel - Black - 79" Long # IN436L It is important to note that Inno recommends the 50" # INB127 maximum crossbar length for your 2022 Chevy Equinox. If you go with longer crossbars,...
  view full answer...
• Roof Rack Fit For 2013 Honda Crosstour
  I was able to find a roof rack that fits your 2013 Honda Crosstour, and in fact there are two, both from Inno. One is an aero bar roof rack and the other is a square bar rack. I'll list out the options for both, and I did verify these fits directly with the manufacturer for you. Aero Crossbar Roof Rack - Inno Aero Crossbars # INXB123-130 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK587 Square Crossbar Roof Rack - Inno Square Crossbars # INB127 - Inno Feet for...
  view full answer...
• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...
  
• Replacement Lock Cover for Inno Feet
  Hi Scott; sorry for the delay on this it took a while to hear back from Inno. The part you need is the Replacement Lock Cover Set for Inno Roof Rack Feet Stays for Bare Roofs # IN97YV. This replaces the lock and cover on the # INSUT. However, this will be a random lock so more than likely it won't match the others on your roof rack. We don't have a way to get a specific lock core for it to remain keyed alike.
  view full answer...
• Thule Roof Rack Recommendation for 2012 Toyota Camry
  For a new Thule roof rack that fits your 2012 Toyota Camry the Wingbar Evo rack part numbers # TH711420, # TH710501, and # TH145149 would be a great choice confirmed to fit the vehicle and the bike racks you have as well as long as they can fit aero shaped bars.
  view full answer...
• Parts Needed to Install Older Thule Square Bars 2012 Toyota Camry
  Hey Brian, you are on the right track for a solution to allow you to continue to use the older Thule square bars on your 2012 Toyota Camry as thankfully Inno decided to make their square bar racks to fit the exact same bar size. I am not sure how Thule feels about this haha... So what you need is the feet kit part # INSUT and the fit kit part # INK872 and you'd be set!
  view full answer...
• Parts Needed to Install Old Thule Square Bars on 2000 Toyota Tundra Access Cab SR5
  Hey Chris! To install your Thule square bars on the roof of your Tundra you will need the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK153. What will you be using the solar for?
  view full answer...
• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar Rack
  Thule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options. For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
  view full answer...
• How to Use Older Thule Square Bars with 2017 Toyota Highlander with Naked Roof
  Hey John, I do have a solution for you but the Thule square bar roof racks changed a few years ago and now their current feet don't work with the older style of crossbar. The new crossbar has a channel that runs along the bottom of it whereas old style did not have this. But we have found is that the Inno square bars are exact same dimensions so you can use their feet and fit kit with the bars you have now. For that you'd need the part numbers # INK666 for the correct fit kit and part...
  view full answer...
• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
  view full answer...
• How To Determine Crossbar Placement On A 2024 Ford Maverick
  Hello Warren, I can definitely help. Roof rack manufacturers test vehicle roofs to determine the strongest points. They develop their fit kits to fit in this predetermined spot. So, this measurement will vary from vehicle to vehicle. For a 2024 Ford Maverick, the front crossbar will be placed 12-1/4" back from the top edge of the front windshield. The rear crossbar will be placed about 27-1/2" behind the front crossbar. There may be a bit of front/back wiggle room, but generally you will...
  view full answer...
• Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan Maxima
  The SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
  view full answer...
• Roof Rack Capacity for a 2017 Ford Fiesta
  The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
  view full answer...
• Roof Rack Recommendation for 2008 Honda Fit for Carrying Kayak Carrier
  For your 2008 Honda Fit the Inno roof rack part numbers # INB127, # INSUT, and # INK219 is a confirmed fit and would do a great job carrying a kayak carrier. For the carrier we have the Thule Hullaport part # TH849000 which will do a great job and is compatible. It's padded, can fold down when not in use, and can be expanded to carry a second kaya if ever needed.
  view full answer...
• Roof Rack Recommendation for 2006 Chevy Uplander
  Thule does not make a roof rack solution that fits the naked roof versions of the 2006 Chevy Uplander. Closest thing would be the Inno brand roof rack that consists of part numbers # INB127, # INSUT, and # INK585. This won't reuse any of your Thule roof rack but your roof carriers will fit this same square bar style of rack that you had.
  view full answer...
  
• Cost Effective Roof Rack Recommendation for 2011 Honda Accord
  What we've found with the Sportrack Semi-Custom roof racks like the part # SR1002 is that they don't always fit the best. Reason being they are designed to fit as many vehicles as possible which means they don't fit everything perfectly. The price makes these hard to not be tempted by, but your best option is a fully custom fit roof rack like the Inno part # INB127, # INSUT, and # INK745 otherwise you'll have to get somewhat creative to get the Sportrack to fit right.
  view full answer...
• Roof Rack for 2013 Ford Focus
  Roof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
  view full answer...
• Roof Rack Options For A 2024 Honda CR-V
  Hey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
  view full answer...
• Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting Points
  If your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
  view full answer...
• What is the Inno Roof Rack Weight Capacity for My 2016 Toyota Tacoma Limited Double Cab?
  Hello Dana, Yes, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2 # IN79TR will be a great fit for your 2016 Toyota Tacoma Limited Double Cab without factory rails. As for the weight rating, you are only as strong as the weakest link, the feet are actually rated for 132 pounds, so I cannot recommend putting more weight on the roof rack than that. As you already know, you will want to check your owners manual to see what Toyota says you can put up there, based on my...
  view full answer...
• Parts Needed To Mount Thule Square Crossbars On 2016 Honda CR-V
  Hello Chad, thanks for reaching out. I do have a solution for you, but first I will need to know exactly what kind of Thule square bars you have. Basically there are new-style and old-style bars. The new-style bars have a bottom channel for mounting the towers. The old-style bars are just a solid bar and do not have a bottom channel. We have solutions for both, just select from the following depending what kind of bar you have. New Style bars: - Evo Clamp Feet for Thule Crossbars - Naked...
  view full answer...
• How to Adapt Old Thule Square Bars to 2015 Toyota Prius V
  Hello KMc; I don't think a fit kit is available but you can still install those old Thule bars on your Prius. The Thule square bars match the current Inno square bars. You can use the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK870. The full Inno roof rack # IN54XR comes with 50" bars so I would double check the length of your current crossbars to make sure they're appropriate for your vehicle.
  view full answer...
• How to Mount Old Thule Square Bars to 2020 Toyota Camry
  Thanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
  view full answer...
  
• Can Old Thule Square Bars Be Mounted On A 2008 Honda Civic 4-Door LX?
  Hey Matt, thanks for reaching out. There is a solution for using the old-style Thule square crossbars on a 2008 Honda Civic, and it involves using parts from an Inno roof rack. The Inno square bars have the same dimensions as the old Thule bars and they do not have a bottom channel, so they mount the same way. To mount them on your 2008 Civic, you will need the following: - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200, XS250, and...
  view full answer...
• Thule Roof Rack Recommendation for 2012 Toyota Camry
  For a new Thule roof rack that fits your 2012 Toyota Camry the Wingbar Evo rack part numbers # TH711420, # TH710501, and # TH145149 would be a great choice confirmed to fit the vehicle and the bike racks you have as well as long as they can fit aero shaped bars.
  view full answer...
• Parts Needed to Install Older Thule Square Bars 2012 Toyota Camry
  Hey Brian, you are on the right track for a solution to allow you to continue to use the older Thule square bars on your 2012 Toyota Camry as thankfully Inno decided to make their square bar racks to fit the exact same bar size. I am not sure how Thule feels about this haha... So what you need is the feet kit part # INSUT and the fit kit part # INK872 and you'd be set!
  view full answer...
• What Roof Rack is Compatible with My 2015 Toyota Camry's Bare Roof?
  For a great economic option that will securely fasten to your bare roof of your 2015 Toyota Camry LE, I suggest the following parts: - Inno Square Crossbars - Steel - Black - 50" Long - Qty 2 # INB127 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK872 With this roof rack system, you can leave the crossbars on after installation even when they are not in use. However, I recommend removing the...
  view full answer...
• Recommended Roof Rack for 2016 Toyota Camry
  I reached out to my technical fit contact at Thule and she said that the fit for Thule Aero 400 feet stopped in 2011 so there are no compatible fits past that date. For your 2016 Toyota Camry, I recommend the Inno system consisting of crossbars # INXB138-2, feet # INXS250, and fit kit # INK872. This is a complete system with Aero Bars compatible with your vehicle. If you want a Thule roof rack, I recommend the Thule SquareBar Crossbars - Steel - 43" # TH712100, the Evo Clamp Feet...
  view full answer...
• Roof Rack for Carrying Kayaks on a 2013 Toyota Camry
  To build a roof rack, you'll need to follow our fit guide to ensure that you are getting the right kit to mount the crossbars. I've included a link to the full selection for you below, but I have a recommendation for you based on size and need. All roof racks designed to fit your 2013 Toyota Camry's naked roof use a clamp style attachment. This is because the roof does not include fixed mounting points or any other way to mount a roof rack. The clamps hook into the door jamb of the Camry...
  view full answer...
• Cost Effective Option To Carry Two Kayaks On a 2013 Toyota Camry
  In order to haul two kayaks on a 2013 Toyota Camry you will need a roof rack and side carrier. The reason you must use a side carrier is because this is the only way that they will both fit. I recommend the Inno Square Crossbar System part # INB127, part # INSUT, and part # INK872 for the roof rack and the Inno Kayak Carrier w/ Tie-Downs part # INA455 for the kayak carrier. I understand this may be more than you are looking to spend but this is one of the most cost effective options we...
  view full answer...
• Roof Rack Recommendation for 2016 Ford Fiesta Sedan
  The best value roof rack we have for your 2016 Ford Fiesta that has a naked roof is the Inno rack part numbers # INB127, # INSUT, and # INK872. This will fit MUCH better than the Sportrack you tried as it is a custom fit rack and what you tried is only semi-custom and is a design that would most likely at least partially transfer to a similar future vehicle. Then for a 2 kayak carrier the Thule Compass part # TH890000 fits this rack and would be an easy way to carry your kayaks. It's padded...
  view full answer...
  
• Inno Square Bar Roof Rack that Fits 2017 Ford Fiesta Sedan
  For a square bar Inno roof rack that fits your 2017 Ford Fiesta 4 door sedan you'd want the part numbers # INB127, # INSUT, and # INK872 instead actually. This will fit much better than the Sportrack you tried.
  view full answer...
• Roof Rack for 2015 Toyota Camry and Thule Portage Canoe Carrier
  There are many roof racks you could use on your 2015 Toyota Camry that would be compatible with the Thule Portage canoe carrier # TH819. It doesn't even have to be a Thule roof rack. The most cost effective roof rack for your Camry is from Rhino-Rack using the following parts: # INB127, # INSUT, and # INK872. If you wanted the equivalent Thule square bar system you would need the following: SquareBar crossbars # TH712100 Evo Clamp Feet # TH710501 Evo Fit Kit # TH145149 To sure to consult...
  view full answer...
• Why is the SportRack Semi-Custom Roof Rack Recommended To Be Removed When Not Used?
  The SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 50" Long # SR1002 are recommended to be removed when not in use because they are not a custom fit. The semi-custom fit means they have a good fit for a variety of vehicles so if you left the rack on your vehicle you would want to check it regularly to make sure nothing has slightly loosened. A custom fit roof rack would be a precise fit for your vehicle and wouldn't require removal so you could keep the rack...
  view full answer...
• Economical Roof Rack and Cargo Basket Recommendation 2017 Toyota Camry
  For an INNO roof rack confirmed as a fit for your 2017 Toyota Camry the parts you would need are # INB127, # INSUT, and # INK872. See install video for more info. For an affordable roof basket, I recommend using the SportRack Vista Roof Mounted Cargo Basket part # SR9035. The SportRack Basket has dimensions of 44" Long x 39-1/8" Wide x 4-1/2" Deep.
  view full answer...
• Roof Rack Recommendation for a 2013 Toyota Camry
  The Sportrack Semi Custom Rack part # SR1002 is a fit for your 2013 Toyota Camry, but since this is a semi-custom rack it wouldn't be my recommendation. Instead I would recommend a custom rack by Inno that consists of part numbers # INB127, # INSUT, and # INK872. Semi-custom racks are notorious for not fitting well. If you only plan on using the rack maybe once or twice total the Sportrack would do the trick. If the rack will see regular use I would strongly recommend going with the Inno.
  view full answer...
• Will the Rhino-Rack Cargo Basket Work with Inno Aero Crossbars?
  When the product says that the Rhino-Rack Roof Mounted Steel Cargo Basket - 47" Long x 35" Wide # RMCB might not fit low-profile roof racks, it is talking about the distance from the top of your vehicle to the very bottom of the mounting brackets of the basket. The brackets of the Rhino-Rack basket are about 1-inch tall. The basket will be able to mount on the Inno Aero Crossbars # INXB108-2 when paired with the Inno Flush Feet for Aero Crossbars - Naked Roofs # INXS200 and the Custom...
  view full answer...
• Roof Rack Fit on a 2014 Camry
  The Rola 59733, is not a confirmed fit for your 2014 Toyota Camry. The good news is, there are a number of options available to you, and I recommend the Inno Crossbars # INXB138-2, Feet # INXS250, and Fit Kit # INK872.
  view full answer...

Do you have a question about this Roof Rack?