To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Thule TracRac SR ladder rack slides the full length of your truck bed, so you can set the crossbars exactly where you need them. Whether you’re hauling long boards, pipes, or a single kayak, the quick-release knobs let you loosen, move, and lock the uprights in seconds. When you don’t need the rack, it slides forward to clear the bed or can be removed entirely from the base rails. With a 1,250-lb carrying capacity, it handles serious work and weekend gear alike.
The rack is made from 6000-series aluminum that’s both strong and lightweight, so it won’t cut into your payload capacity. It’s naturally rustproof, and the dual-stage powder coat—an e-coat followed by a clear coat—adds extra protection against scratches and corrosion. The internal web structure in each crossbar boosts rigidity, keeping everything solid even under heavy loads.
Elliptical crossbars help air move cleanly over the rack, cutting down on drag and wind noise. Each bar has a built-in airfoil strip that blocks air from whistling through the T-slots, so you get a quieter ride whether the rack is loaded or empty.
Eight aluminum tie-downs come standard—four adjustable load stops that fit in the top channels of the crossbars and four side cleats on the uprights. The load stops have built-in strap loops and slide along the bars for quick setup, giving you solid anchor points for ladders, lumber, or boats.
The base rails drop right into the truck’s stake pockets, so there’s no drilling required. The wide bases on each upright add stability without extra bracing. The whole setup mounts over the bed rails, leaving your bed open for tools or gear while keeping the load supported above it.
Alternate Instructions
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Sierra K.
5/26/2022
In the instructions, it mentions removing the rack when not in use to keep it looking new longer. Using graphite or a dry lubricant around the locks and turning the locks periodically, so they will not get stuck, is also recommended.
Jeffrey
12/1/2024
he rack it self has been useful. As for the quality of the product my fears of the powder coating starting to bubble and flake has happened and isnt stopping. This started about month four of owning the Thule product. There are no scratches just corrosion under the powder coat and the cause of the flaking finish. It hauls well no doubt. If you are looking for it to hold up to the elements and look tasteful mine has not. Honestly I had expected the finish to let go but not so soon. powder coating aluminum and doing it correctly is hard to do. I would order a cheaper option next time as price did not dictate quality with this product. The rack is used to carry a kayak. It has done that very well.
James D.
7/2/2024
The bolts that keep the uprights from sliding seized on both sides. Had to cut off the plastic hand knobs to access the head of the bolts and use a pipe wrench to get the bolts out. Less than one year old. Other than that, happy with the rack.
Jenny N.
9/6/2022
I am sorry to see that this was rated at a one star. I wanted to ask to see how we could have made this a better experience for you.
John
9/22/2023
No issues except I replaced the holddowm ardwarew on the bedra because the were distorted and I couldnt take them off the truck when I wanted to install my camper
Nick S.
10/20/2025
That looks great on your truck! I am glad it has been working well for you. Where are you mainly taking that canoe out to?
Mike L.
11/4/2025
That's awesome, Louis! Great advice on the BAK cover....
Nick S.
11/24/2025
That is great to hear! I am glad the installation was a breeze and it works well for your application. What do you do for work hauling that material around?
Brooke M.
2/20/2025
Thanks for sending in the photo, it looks great! Is this a work truck? Its a really cool feature how youre able to slide the bars up like that.
Brooke M.
2/20/2025
Chris
8/5/2016
Im as happy today as I was the first day that I had the Rack. Its agreat product!!
Do you have a question about this Ladder Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Andrew N.
10/11/2022
You are in luck, because there are a few inside-bed-rail tonneau covers that fit your truck bed with the TracRac ladder rack. I would look at the Leer Soft Tonneau Cover - Roll Up - Vinyl and Aluminum # LE78VR which fits the 6-12 bed.
Helpful Links
Tonneau-CoversGMCSierra+New+Body2007LE78VR.html?VehicleID=20077001604