See what our Experts say about this CURT Trailer Hitch

• Trailer Hitch Recommendation for a 1989 Chevy K1500
  The Curt 3-Piece Trailer Hitch Receiver # C15511 will fit a 1989 Chevy K1500 if it's the cab and chassis model. Since you have a pickup we need to find a different hitch. If your Chevy has the standard or step bumper then I recommend checking out the etrailer hitches; part # e88AR if you have a crew cab or part # e29KR if you don't have a crew cab. These are lower capacities than the Curt hitch you currently have but it matches more closely to what your truck is really capable of pulling. If...
  view full answer...
• Will Curt Trailer Hitch Fit 1963 Ford F-100 4x4
  Hey Joe! Yes, the Curt Trailer Hitch # C13099 will fit your 1963 Ford F-100 4x4. The only requirement for fitment is that you have the deepdrop bumper on your truck. What will you be using the hitch for?
  view full answer...
• 1985 Chevy C10 Trailer Hitch Recommendation for Good Ground Clearance
  Good to hear from you, Ivan! I have 2 different hitch options for your 1985 Chevy C10 pickup depending on what bumper you have on your truck: - Standard/Step Bumper # 13028 - Deep drop Bumper # C13099 These are designed to hide the crosstube under your vehicle so the only part visible is the hitch receiver. If you check out the attached photo it was taken by a customer who installed the 13028 on their '86 C10 just to give you a reference.
  view full answer...
• Recommended Hitches for a 2001 Ford F-150 and a 1993 Ford F-150
  No, sorry William those hitches will not be compatible. The 1993 Ford F-150 was part of the 9th generation which spanned from 1992–1997. The 2001 was part of the 10th generation that went from 1997–2004. Ford made some major changes between those two generations. Those trucks went from being big, square, and boxy to narrow and round. Completely different frames and rear ends so nothing carried over. For a 1993 Ford F-150, we've got two options depending on what bumper you have. For a Deepdrop...
  view full answer...
• Trailer Hitch Receiver Fit For 1965 Ford F-250 With Custom Bumper
  Outstanding photos thank you so much for sending them, and based on that we do have a hitch that can fit your 1965 Ford F-250 with a custom bumper. Since the frame is clear from any interference with the bumper, all you need to do is measure from the frame to the bottom of the bumper and see what that distance is. If that distance is 7-1/4 inches or less there is a hitch you can use: - Curt Trailer Hitch Receiver # C13099 The reason why is the Curt # C13099 measures 7-1/4 inches from...
  view full answer...
  
• Trailer Hitch Recommendation for a 1987 Chevy C/K 1500 With a Deep Drop Bumper
  A deep drop bumper is a bumper that hangs further below the frame than a standard bumper. Check out the photo that I attached showing a deep drop bumper compared to a standard bumper and a step bumper. We have three frame mount trailer hitches that will work with a deep drop bumper on your 1987 Chevrolet C/K 1500. You could install the Curt Hitch, # C13099 or the Draw-Tite Hitch, # 41504. These are all Class III trailer hitches that have a towing capacity of 5,000 lbs and a tongue weight...
  view full answer...
  
• Hitch Recommendation for a 1976 Ford F150 with a Deep Drop Bumper
  A roll pan bumper is a bumper that basically makes the rear bumper look as if it does not stick out further than the rest of the truck and that is molded into the rear of the truck. Its basically a cosmetic modification that you see on a lot of lowered and/or show trucks. What you have is definitely a deep drop bumper. Check out the FAQ article I attached on bumper types for you to check out. With that being said, you will need a hitch designed for trucks with deep drop bumpers like the...
  view full answer...
  
• Hitch for 1985 Chevy C10 with Deep Drop Bumper
  We have hitches that fit your 1985 Chevy C10 that has a deep bumper with the Curt hitch part # C13099. Your setup would definitely not be too low to tow with. A rise ball mount would make up for a lower hitch as well. I attached a help article
  view full answer...
• Availability of a Class III Trailer Hitch to Fit a 1997 Chevrolet K1500 Truck
  I have a solution for you, but the Curt Class III Trailer Hitch, # C13029, that you referenced will not fit the 1997 Chevrolet K1500 truck. If your truck has the standard or step bumper, then the Curt Class III Trailer Receiver Hitch, # C13042, will fit you truck. If your truck has the 10 inch deep drop bumper, then the Curt hitch, # C13099, is confirmed to fit. See attached picture to see the difference in bumpers.
  view full answer...
  
• Fit of Curt Class V Receiver Part # C15300 on 1992 Ford F250 with 10 Inch Drop Aftermarket Bumper
  According to my contacts at Curt Manufacturing, the Class V Receiver you referenced, part # C15300 will work with a stock bumper only. Your 10 inch bumper comes down too far for the receiver opening to clear the bumper. I am told that the Class III Receiver, part # C13099 will most likely work with your bumper. The top of the receiver opening is 7-1/4 inches below the top of the mounting flanges. To confirm that it will work on your truck, measure down 7-1/4 inches from the bottom of...
  view full answer...
• Recommended Trailer Hitch Receiver For a 1972 Chevrolet C10 Pickup
  If your 1972 Chevrolet C10 pickup has a standard bumper you will want the etrailer Trailer Hitch Receiver # e88AR. Otherwise we have the Receiver # C13099 which fit the deep drop style bumper. Both these receivers are class III and rated for 6,000lbs of trailer weight using a standard Ball Mount # EBMK4. If you use a Weight Distribution Hitch # EQ37100ET the capacity of both receivers increases to 10,000lbs of trailer weight with a tongue weight up to 1,000lbs. For the trailer wiring...
  view full answer...
• Recommended Trailer Hitch for 1993 Chevrolet K3500 Pickup with Deep Drop Bumper
  The Curt Trailer Hitch Receiver part # C13099 is a confirmed fit for a 1993 Chevrolet K3500 Pickup and it is designed for models with a deep drop bumper so it will work great for you. It offers a 5,000 lb weight capacity with standard 2" receiver. It does require drilling for installation.
  view full answer...
• Is Modification Necessary for Curt Multi-Fit Hitch on 1996 Ford F-150
  I reached out to my contact at Curt and he said for your 1996 Ford F-150 the Curt Trailer Hitch Receiver # C13902 would require some pretty significant modifications on the truck for installation. Even when considering that the actual custom-fit options for your F-150 also require drilling into the frame rails, he does not recommend this multi-fit option for your truck unless it's an absolute emergency (just need to mount something in a pinch). He has installed the hitch before and it's...
  view full answer...
• Trailer Hitch for a 1996 Chevy K1500 with Roll Pan Bumper Installed
  What you will want to do is look at the hitches available for the 1996 Chevy K1500 with 10 inch deep drop bumper. These hitches come down lower and could work for you. Curt hitch # C15317 has the highest capacity of the options at 2,400 pounds tongue weight capacity and 16,000 pounds gross trailer weight capacity. But it measures 7-1/4 inches from the bottom of the frame to the top of the receiver. Check your truck to see if your could get away with 7-1/4 inches. If it will not work then...
  view full answer...
• Recommended Trailer Hitch Receiver For a 1979 F-150 Lifted 9" With 38" Tires
  The Curt Trailer Hitch Receiver # C13099 will fit your 1979 Ford F-150 with the deep drop rear bumper. This receiver is a class III rated for towing up to 6,000lbs of trailer weight with up to 600lbs of tongue weight. It can tow up to 10,000lbs with up to 1,000lbs of tongue weight by using a weight distribution hitch. To tow a trailer you will most likely need a hitch like the Gen-Y Adjustable 2-Ball Mount # 325-GH-317 which has a 15" drop. When not towing you can add the Step # GY79VR...
  view full answer...
• Goosneck Hitch Recommendation for 1983 Chevy C20 Pickup Truck
  You can indeed install a gooseneck hitch on a 1983 Chevy 3/4 ton C-Series truck. B&W offers a compatible Turnover Ball gooseneck hitch which is part # BWGNRK1400. One of the very nice features of the Turnover Ball hitch is that it also provides an attachment point for the excellent B&W Companion 5th wheel hitch like # BWRVK3400-5W for short bed trucks or # BWRVK3500-5W for long bed trucks. If you'd like to install a 7-way trailer connector in the truck bed so you don't have to run the...
  view full answer...
• Where to Connect 4-Way Flat Trailer Connector For a 1993 Ford F-150?
  We have the Curt T-Connector Vehicle Wiring Harness # C55316 that will easily plug into the factory connector on your 1993 Ford F-150. This connector is located on the drivers side behind the rear bumper. This would also be the best place to tie into if you decided to use a hardwire kit like Item # 18252 on your F-150. The Mounting Brackets # 18144 and # 18140 will allow you to secure the 4-way to a Receiver # C13099 without having to drill into your truck to secure the connector.
  view full answer...
• Parts Needed for Towing with a 1983 Chevrolet C20 Pickup
  The Curt Curt Trailer Hitch Receiver # C13099 that you referenced will fit your 1983 Chevrolet C20 if it has an 8 foot bed and came with a deep drop bumper. This trailer hitch is rated for 5,000 lbs Gross Towing Weight (GTW) and 500 lbs Tongue Weight (TW). When used with a Weight Distribution (WD) system those capacities are increased to 5,500 lbs GTW and 550 lbs TW. If you have an 8 foot bed with the standard or step bumper then you will want to go with the Curt # C14082 instead. This...
  view full answer...
• Trailer Hitch and Wiring for a 1977 Chevy C10 Pick-up with 6 Foot Step Side Bed
  We do have trailer hitches that will fit your 1977 Chevy C10 short bed but # C13099 is only for long bed models. For your truck you can use Curt trailer hitch # 13028 unless it has the 10 inch deep drop bumper. If it does have the deep drop bumper you can use # C15511. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball...
  view full answer...
• Trailer Hitch Recommendation for a 1966 Ford F-100 With a Standard Bumper
  I have included a picture of what a deep drop bumper is going to look like for you. If your bumper looks more like the standard bumper, pictured in the FAQ I have linked for you, then you do not have the 10 inch bumper. You would then need a trailer hitch that is designed for the regular bumper, like # 41001. I have included a link to the installation details for both hitches. I also recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch...
  view full answer...
  
• Hitch Recommendations for a 1985 Chevy C/K Series Pickup Truck
  This will fit your 1985 Chevrolet C/K Series Pickup as long a you have an 8 foot bed and a deep drop bumper. You will have to drill six 7/32 inch holes in order to install this Curt Trailer Hitch, part # C13099, but you will not need to do any welding. If you had a 6 foot bed, you would want a Curt Trailer Hitch, part # 13028. I attached installation instructions for all of these hitches below for you to check out also.
  view full answer...
• Westin Fey Bumpers for 1985 Chevrolet C/K Series Pickup
  We offer a number of aftermarket Fey bumpers for your 1985 Chevrolet C/K Series Pickup so long as it is NOT a flareside/stepside type bed. These appear on the page I linked for you and they include 3 chrome-finish models as well as silver and black bumpers too. The chrome bumper parts we can offer you are: Westin Fey Surestep Deluxe XLT # 21007-92230 Westin Fey Surestep Rear Bumper # 21002-92230 Westin Fey Diamondstep Rear Bumper # 21000-92230 All of these bumpers offer no-drill installation...
  view full answer...
• Recommended Hitch for a 1995 Ford F-150
  All available hitches for a 1995 Ford F-150 require drilling to install. Thank you for the information but I am sorry there are no other options. The Curt Trailer Hitch item # 14001 you were looking at is a great hitch. It fits the 1995 F-150's that have a standard or step bumper. This hitch is made in the USA and has a 10,000 lbs towing capacity that can be increased to 12,000 lbs when used with a weight distribution system. I have linked an installation video below. If your truck...
  view full answer...
• Recommended Trailer Hitch for 1992 Ford F-150
  Depending on the type bumper you have on your 1992 Ford F-150, we have a hitch that will work for you. If you have a deep drop bumper on your truck, I recommend the Curt Class lll Hitch, part # C13099. This hitch has a 2 inch receiver opening. If your F-150 has a standard bumper installed, I recommend the Curt Hitch, part # C15300. This is also a Class lll hitch, and has a 2 inch receiver opening. The hitch you referenced, part # 87115, is not designed to fit your truck. The ball...
  view full answer...