bing tracking image
Customer Service My Orders
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class II
  5. 3500 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2006 Dodge Durango
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SCHEDULE AN INSTALLATION
go
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: C12264
21 Reviews | 21 Questions
In Stock
$253.86
Retail:$409.95
You Save: $156.09
 Trailer Hitch
Not Confirmed to Fit

2006 Dodge Durango

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch receiver - custom fit class ii 1-1/4 inch
curt trailer hitch for towing receiver - custom fit class ii 1-1/4 inch
curt trailer hitch class ii c12264
curt trailer hitch c12264
curt trailer hitch class ii c12264

Show All (5) Product Images

Show Fewer Product Images

In Use/Installed

2008 dodge grand caravan trailer hitch curt for towing receiver - custom fit class ii 1-1/4 inch
2008 dodge grand caravan trailer hitch curt class ii c12264
2008 dodge grand caravan trailer hitch curt class ii c12264
2008 dodge grand caravan trailer hitch curt for towing c12264
2008 dodge grand caravan trailer hitch curt for towing receiver - custom fit class ii 1-1/4 inch
2008 dodge grand caravan trailer hitch curt for towing class ii on a vehicle
2008 dodge grand caravan trailer hitch curt c12264
2008 dodge grand caravan trailer hitch curt for towing on a vehicle
2008 dodge grand caravan trailer hitch curt class ii on a vehicle

Show All (9) In Use/Installed

Show Fewer In Use/Installed

Videos

Show All (18) Videos

Show Fewer Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SCHEDULE AN INSTALLATION
go
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12264 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (21)
  • Q & A (0)
  • Related Parts
  • Photos

CURT Trailer Hitch - C12264

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 3,500 lbs (GTW): Handles small campers, boats, and utility trailers safely
  • Holds up to 350 lbs (TW): Supports bike racks, cargo carriers, and Class II accessories
  • Bolt-On Install: Mounts using existing hardware—no welding or frame mods required
  • Durable Steel Build: Fully welded, square-tube design ensures long-term towing strength
  • Gloss Black Finish: Powder coat over protective base resists rust and road wear
Made in USA

Features to know about

Haul More Without Heavy Equipment: Class II 1-1/4" Receiver for Everyday Use

This Curt Trailer Hitch Receiver gives your vehicle some real utility for towing and carrying gear. With a 3,500-lb maximum gross trailer weight rating and a 350-lb maximum tongue weight rating, it’s built for light-duty towing and daily use. It’s ideal for mounting a bike rack, pulling a small trailer, or attaching a cargo basket when you need extra space. The 1-1/4" x 1-1/4" receiver opening gives you access to a wide range of Class II accessories without needing adapters.

Built Strong to Handle the Load: Fully Welded Steel with Protective Finish

This hitch uses a sturdy square-tube design and precision robotic welds that maximize strength and ensure a precise fit. The gloss black powder coat finish is layered over a protective base coat to guard against rust and road grime. The result is a durable hitch that stays solid season after season without flaking or corroding under the elements.

DIY Ready and Straightforward: Bolt-On Installation with Existing Hardware

You don’t need special tools or welding gear to get this hitch on your vehicle. It bolts directly to existing mounting points using your vehicle’s hardware, so you can install it in your own driveway with basic hand tools. The included installation instructions keep things simple from start to finish, making it practical for do-it-yourself setups.

Clean Look That Fits Tight: Concealed Cross Tube Design

With its concealed cross tube, this hitch keeps most of the structure tucked up underneath the vehicle so only the receiver is visible. That means you get the added function of a hitch without losing a clean, factory look at the back end.

Specs

Dimensions

  • Receiver opening: 1-1/4" x 1-1/4"

Weight and Capacity

  • Rating: Class II
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum tongue weight: 350 lbs

Warranty

  • Limited lifetime warranty

Technical installation diagram of Curt Class II Trailer Hitch Receiver C12264 showing mounting points and receiver placement under vehicle frame


12264 Curt Class 2 Trailer Hitch Receiver

Installation Details C12264 Installation instructions

This Product Fits The Following Vehicles






Customers Who Purchased This Trailer Hitch Also Bought...



Customer Satisfaction Score:

Ratings & Reviews

4.9

21 reviews
5 Stars
(18)
4 Stars
(3)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
2014 Dodge Grand Caravan
Product was delivered quickly and everything necessary for installation was present. Directions (especially video directions were very helpful and appreciated. We had our only problem disconnecting the circuit plugs from the taillights, otherwise all went sommothly.
John L. profile picture

John L.

8/9/2017

works well. no problems

by:
2014 Dodge Grand Caravan
Following the instructions this was an easy install which I did myself and I'm 71. Ya, you have to move the exhaust pipe to the side, but that was no big deal.
I'm real happy about no modification was needed to the rear fascia. The receiver fits tight to the fascia and is hardly noticeable.
Unless you look close most people don't notice it's even there, which is why i like it, plus it does exactly what a hitch should do.
Another great product from Curt.....thank you !
by:
2014 Dodge Grand Caravan
Installed this trailer hitch on my wife's minivan Mother's Day morning 2016. Instructions were easy to follow and it fit without having to notch the bumper cover. Total installation time was about 90 minutes. Wife wasn't as excited about it as I thought she would be, so stopped and bought her some flowers, on the way home from fishing.
by:
I finally got around to putting on the hitch!! Only had it a month! It took probably 20 minutes or so. Hardest part was dropping the exhaust system. Take it off from behind the muffler and back. Set hitch on floor jack, have helper hold it while you jack/guide it into place. Bingo, it's done, well, put in bolts first then you are done!
by:
It took about 50 minutes to install from start to finish. Most of the time was preparation, fitting it in place, and picking up my tool. The fit was perfect with the necessary attaching bolts in the auto frame. The video was a nice heads up to loosen the tail pipe.

I needed to use an 18mm box wrench for the front bolt above the tail pipe, otherwise a 1/2 inch ratchet wrench with a 13mm, 15mm, and 18mm worked. The tail pipe holder was a 1/2 socket.

I installed the hitch without raising the van. I put the hitch in place on the garage floor under the van and used a jack stand on each side to hold the hitch in place on the frame. I needed to raise the right side of the hitch and slide it in from the back as the tail pipe obstructed a straight up lift. On the left side there was no restriction. So fit the right side in place first. I always fit an accessory in place and hand tighten all the bolts before snugging and the final set. I put a few drops of medium (blue) Threadlocker on my bolts.

I received the hitch by UPS three days after I placed the order, using the free shipping option.
Thank you
Don J
by:
2006 Chrysler Town and Country
This was my second purchase from etrailer.com. Both times I ordered a Curt hitch receiver and both times I have been completely satisfied with the product and the service.

Thanks guys, you're doing a great job!
by:
SO glad to have etrailer within driving distance! Pay a very competitive cost on the trailer hitch and etrailer installs it for no charge. Does it get any better? Thank you for a job well done!
by:
this is a great product. I have purchased nad installed this on 3 diferent vans to use for my bike rack.
by:
2014 Ford Edge
Very easy installation on our 2014 T&C but I must admit my friend has a garage so we used his lift & pneumatic tools. I know I could have done it in my driveway but power tools made it so much easier. We just haul bikes so this Class II 1 1/4" is perfect. It sits just under the back bumper and back a couple inches from the edge so it's not sticking out at all. No trimming of the bumper was needed. All in all a great choice!
by:
2014 Chrysler Town and Country
good part, good delivery
it fit on my 2014 town and country. I use it for boats and small trailers
by:
I appreciate the installation video however you may want to point out that the hanger bolts are small and can break when trying to remove

And alternate method is to pop out the rubber part of the hanger instead of tying to unscrew the hanger bolts
by:
2014 Chrysler Town and Country
Very sturdy, well finished. Easy install. Quick shipping.
by:
Great product and easy to install. The video was a great help.
by:
Very happy with the hitch. I do wish I had purchased the 2" model, but what we purchased has been adequate.
by:
I installed it my self it went very well toke me 2hrs even with the wiring
by:
Well satisfied with product.
by:
2015 Dodge Grand Caravan
by:
by:
by:
by:
21
21
true

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?
  • Longer Ball Mount that Fits 1-1/4 inch Trailer Hitch
    A longer ball mount would be a decent idea I would think but since its going to be a Class II 1-1/4 inch ball there aren't super long options. Mostly everything will be about same length with some variations. If you can determine the rise/drop you need I can let you know what longest option would be.
    view full answer...
    Image 1 for
  • What Size Locking Hitch Pin Fits Different Class Trailer Hitches
    On a Class I or II 1-1/4 inch trailer hitch you will need to use a 1/2 inch hitch lock such as # e98879. This lock has a 2 inch span which is the usable length of the pin. I have included a link to a video review for you. For a Class III or IV 2 inch trailer hitch as well as Class V 2-1/2 inch trailer hitches you will need to use a 5/8 inch diameter pin such as # e98881 which has a span of 3-5/8 inches. I have included a link to a video review of this lock as well.
    view full answer...
  • Does Install of Curt Hitch on 2012 Chrysler Town and Country Require Fascia Trimming
    Trimming the fascia of your 2012 Chrysler Town and Country for the install of the Curt hitch part # C12264 will require you to lower the hitch to access the fascia. I know that's what you were wanting to avoid but it will be easier than trying to trim the fascia with the hitch installed. It also will allow you to do a much better job that will look nicer and more professional. I'd use a utility knife for this.
    view full answer...
  • Does Curt Trailer Hitch FIt 2020 Dodge Grand Caravan With Stow & Go Seating
    Hi Ed, Yep, the Curt Trailer Hitch Receiver # C12264 does indeed fit your 2020 Dodge Grand Caravan with Stow & Go seating. I also wanted to mention that if you need trailer wiring, the correct fit for your Dodge is the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56331.
    view full answer...
  • Trailer Hitch Receiver With the Highest Ground Clearance for a 2012 Chrysler Town and Country
    We have actually installed both Curt Trailer Hitch Receivers, parts # C12264 and # 13364, as well as both Draw-Tite Trailer Hitch Receivers, parts # 36455 and # 75579, on similar 2012 Chrysler Town and Countrys. Out of all 4 of those choices the Draw-Tite Class II 1-1/4 inch receiver # 36455 offers the most ground clearance at 13 inches. This receiver has a max Gross Trailer Weight of 3,500 lbs and a max Tongue Weight of 300 lbs. If you need wiring for your Town and Country I recommend...
    view full answer...
  • Are Trailer Hitches for 2008 Dodge Grand Caravan and 2014 Grand Caravan the Same?
    The hitches that fit a 2008 Dodge Grand Caravan are indeed the same hitches that fit a 2014 Grand Caravan, the Curt Class III # 13364 and Class II # C12264.
    view full answer...
    Image 1 for Image 2 for
  • How Exact Does Rise/Drop Figure Need to be For Ball Mount
    Getting the correct rise/drop is important but if you can't get it totally exact it's not that big of a deal. Getting it pretty close is often times just as good. This is why there aren't ball mount rise/drop figures available in every possible height. On a vehicle like your 2012 Chrysler Town and Country that is going to have some suspension sag when the weight of the trailer is put on the hitch it typically works out the best to have the rise/drop from the ball mount on the higher side...
    view full answer...
  • Can You Tow A Camper With Class II Trailer Hitch Receiver On 2013 Dodge Grand Caravan
    It sounds like you have the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12264 on your 2013 Dodge Grand Caravan which has a 350lb tongue weight rating, and 3500lb trailer weight rating. As long as the trailer you choose on stays under these capacities you will be fine. If you find you need a trailer hitch receiver that is a little heavier duty I recommend taking a look at the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75579 which has a...
    view full answer...
  • Curt Class II Hitch and Trailer Wiring that Fit 2012 Chrysler Town and Country
    The correct Curt Class II hitch that fits your 2012 Chrysler Town and Country Touring with a 3.6 liter engine is the part # C12264. There isn't any frame modification required to install this hitch on your vehicle. Then for trailer wiring the Curt kit part # C56331 installs the easiest and has the most reliable converter box so it is what I would recommend. It installs by plugging inline with the taillight connectors at the rear of the vehicle and does not require any cutting or splicing. I...
    view full answer...
  • What Tools are Needed for Installing Curt Hitch C12264
    To install the Curt hitch part # C12264 that you referenced Curt states you will need the following tools: 3/8 inch ratchet 18 mm socket 15 mm socket 13 mm socket torque wrench screw driver/punch utility knife
    view full answer...
  • Trailer Hitch and Wiring for a 2017 Chrysler Pacifica
    The Curt Class II hitch that fits the 2017 Chrysler Pacifica is # C12180. But if you want to use this hitch for an accessory such as a bike rack or cargo carrier Curt requires the use of stabilization strap # 18050 per their warranty requirements. To avoid having to use the strap I recommend using Draw-Tite hitch # 36798 which does not have the strap requirement. If you plan on doing some towing the recommended ball mount is # 36071. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball...
    view full answer...
  • Does Ball Mount Length Need to be Factored When Picking Out Ball Mount with Curt Hitch 12264
    Boat trailers typically have pole tongues which typically don't have any issues with turning clearances. Typically even a-frame trailers aren't prone to clearance issues unless it's just a really short tongue and a really wide trailer. The Curt hitch part # C12264 is in a pretty standard location under the rear bumper so I would not anticipate any issues with the trailer hitting the vehicle with turning. Typically it's the rise/drop figure that is more important as that's what allows the...
    view full answer...
  • Availability of Class I Trailer Hitch Receiver for 2009 Dodge Grand Caravan
    Although there are no Class I hitches for the 2009 Dodge Grand Caravan, you can use a Class II like the Curt # C12264. This has the same 1-1/4" receiver and a higher capacity compared to Class I. Unless you absolutely need a 1-1/4" receiver for some reason, I recommend getting a Class III hitch with a 2" receiver instead. The # e98854 will give you more options for accessories and towing since you won't be limited by the 1-1/4" receiver size. I have attached some installation videos below...
    view full answer...
  • How Far Will Hitch Pin Hole of Curt Hitch # C12264 Be Recessed Under Bumper of 2014 Grand Caravan
    When we installed the Curt # 13364 on a 2014 Grand Caravan, we found that the receiver was recessed under the vehicle so that there was four inches between the hitch pin hole and the furthest rearward point of the back bumper. According to Curt, the receiver tube on the Curt Class II # C12264 is of the same length as the 13364, so it should also be recessed by 4 inches. If you'll be using the hitch for towing, you'll also need a trailer wiring harness, part # C56331, a ball mount, a...
    view full answer...
  • Hitch Pin Hole to Bumper Dimension for Curt Hitch part # C12264
    The distance from the center of the hitch pin hole of the Curt Hitch part # C12264 to the furthest point out on the rear bumper of your vehicle would be right at 5 inches. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
    view full answer...
  • Can Trailer Hitch On 2008 Chrysler Town and Country Fit 2016 Honda Pilot
    The Curt Trailer Hitch Receiver, part # C13146 is confirmed as a fit on 2014 and up Acura MDX, and 2014 and up Honda Pilot, and what I recommend for your 2016 Pilot. It is not listed as a fit for your 2008 Town & Country. Trailer hitches are designed specifically for automobiles frames and should not be used on vehicles they are not made for. I have 2 trailer hitches made by Curt that are designed for the 2008 Town & Country. They are part # 13364 and part # C12264.
    view full answer...
  • Trailer Hitch Receiver and Trailer Connector Kit for a 2009 Dodge Grand Caravan
    The Draw-Tite Class III Trailer Hitch, part # 75579 is a fit for the 2009 Dodge Grand Caravan. The Curt Class II hitch, part # 12264 and the Curt Class III hitch, part # 13364 also fit a 2009 Dodge Grand Caravan. Since a Class III has the more common 2 inch receiver opening, and the Draw-Tite Class III is a bit less expensive than its Curt counterpart, I'd recommend the Draw-Tite model. For a plug-and-play wiring application for your 2009 Dodge Caravan, use # 118552. To complete your...
    view full answer...
  • Distance from Ground to Top of Curt Hitch Opening for 2012 Chrysler Town and Country
    When we installed the Curt hitch part # C12264 on similar 2011 Chrysler Town and Country we found that from the ground to the top of the hitch opening the distance was 11 inches.
    view full answer...
  • Hitch Pin to Use with Curt Hitch # C12264
    Hitch pin size doesn't matter that much I would say. As long as the pin fits through the hitch pin hole and the accessories hitch pin hole you'd be fine. That said, if you were looking at the Curt hitch part # C12264 the # F-4 is an easy solution for a hitch pin and clip.
    view full answer...
  • Weight of the Curt Hitch part # C12264
    The Curt Hitch part # C12264 that you referenced weighs 47 lbs.
    view full answer...
  • Does Curt Ball Mount # C45015 Have Clearance with Curt Hitch 2012 Chrysler Town and Country
    From the center of the hitch pin hole of the Curt ball mount part # C45015 to the back of the ball mount platform measures 8 inches. This would easily have enough clearance with the Curt hitch part # C12264 you have installed on your 2012 Chrysler Town and Country.
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Video by:
Andrew K
Employee Andrew L
Video by:
Andrew L
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.