See what our Experts say about this Redline Accessories and Parts

• What Hardware Does the Valterra Replacement Window Frame Use?
  Hey Mike. I didn't see an order for a camper window, just a fender, so I am not sure what window you bought. Our Valterra Replacement Window Frame item # A77008 uses #6 flat head x 1-1/2" long screws like item # A7704612. Do you have a part number for the window frame you bought?
  view full answer...
• Torx Screws with Stainless-Steel Material for a Trailer Skin
  Hey Casey, thanks for reaching out! We have a few different screws for a trailer lining like the 1-1/2" Long Screw # TFX150 or the 1" Long Screw # WLS100, but the problem is that none of them have a stainless-steel material. You are more than welcome to use any of these options, but you might have an easier time finding exactly what you want by speaking with your local hardware store and seeing if they have or can order something that matches what you reference. Would either of the lengths...
  view full answer...
• Fasteners for Attaching Marine Plywood Decking to Snowmobile Trailer
  Thank you for the photo of one of the original decking fasteners from your aluminum snowmobile trailer. It appears your fastener has a taper at the point; but then again this might be erosion from exposure to winter road salts. We do offer several lengths of Torx fasteners, including some specifically for ACQ-Treated wood, ranging from 1-inch (part # WLS100), 1-1/2-inch (# TF01150 that you referenced) to 2-1/4- and 2-1/2-inch lengths. The key for your proper replacement size is the depth...
  view full answer...
  
• How Does A-Frame Trailer Tongue Tool Box Mount to the Trailer Frame?
  The RC Manufacturing T-Series Trailer Tongue Toolbox - A-Frame - Steel # 313-TM362016M is just the steel box. Most people drill into the bottom of the box to hold the box to the trailer frame with self-tapping screws like # WLS100. You can weld it if desired, but that is not how most choose to attach the box to their trailer frame.
  view full answer...
• What Bolts Are Needed For Installing T-Strap Hinge # PLR2008-SSP on a Trailer?
  Based on your picture it appears your trailer currently uses some screws like the 1" Long Black Torx Wall Liner Screw # WLS100. I do recommend verifying the correct bolts needed with the trailer manufacturer as the T-Strap Hinge # PLR2008-SSP you found may require a through bolt and nut depending on how your trailer is constructed. You will likely need to source that hardware locally to find the correct length.
  view full answer...
  
• Recommended Screws for Installation of Plywood on Enclosed Trailer Wall
  The 1" Long Black Torx Wall Liner Screw # WLS100 is the best option for the plywood installation. These screws are fine thread and made for metal studs. They have a tapping edge but often a starter or pilot hole should be drilled. You can then use the Torx Head Screwdriver Bit for WLS100 Wall Liner Screw # TX425 to snug the head flush.
  view full answer...
• Screw Recommendation for Securing E-Track to Metal Plate Under Trailer Floor
  That is going to depend on the thickness of the floor on your cargo trailer. I attached a link to a page that has all of the self tapping screws you could use for E-tracks. You will want to select the length you need from the filters on the page and the correct length screws would be listed. There are screws from 1 inch to 2-1/2 inches in length like the # TFX250ACQ.
  view full answer...
• How Many 1 Inch Long Black Torx Wall Liner Screw are in a Pack
  The Redline 1" Long Black Torx Wall Liner Screw, part # WLS100, is sold singly. This way you can order just as many as you need. If you need a screwdriver bit for these screws you will want part # TX425.
  view full answer...
• Self Tapping Screw Recommendation for Installing Exterior Light on Trailer
  Self tapping screws like the part # WLS100 which has a Torx head or a part # FA1131822 which is a hex head style bolt would work well. We don't normally see people seal the lights to the trailer as most light assemblies are a weather proof or waterproof design and don't require it. For a sealant we recommend the # 0160297 for sealing trailer roof vents. This would work well for a light assembly as well.
  view full answer...
• Availability of Torx Self-Tapping Screw for Exterior Panels of Haulmark Enclosed Trailer
  The closest we have to what you need is the part # WLS100 which is a 1 inch long Torx screw with the self-tapping head.
  view full answer...
• How are the Long Black Torx Wall Liner Screws Measured
  The 1" Long Black Torx Wall Liner Screw part # WLS100 is measured from the head to the tip, so it is 1" long from the highest point to the lowest point. It uses a T25 bit like part # TX425. We do have the Long Black Torx Wall Liner Screws available in 1-1/2" long part # TFX150, 2-1/4" long part # TFX225, and 2-1/2" long part # TFX250 but these use a T30 bit like part # TX430-1.
  view full answer...
• Availability of a White-Headed Wall Screw for a Cargo Trailer
  We have several wall liner screws such as # WLS100 (1-inch) and # TFX225 (2-1/4 inch) to name a couple. Unfortunately, none that are white-headed at this time but you could paint over the head with a hard enamel because it air dries to a hard, usually glossy finish. I included a link showing you all of the wall screws we currently offer.
  view full answer...
• Recommended Hardware to Attach the Full Size Locking Steel Flush Door Latch
  The Full Size Locking Steel Flush Door Latch part # L3980 can be mounted with a variety of different types of hardware. As you mentioned, pop rivets or carriage bolts would be the most secure. You could also use something like the Long Black Torx Wall Liner Screw part # WLS100 as torx bits are more of a speciality tool. The correct bit for this screw is part # TX425. If you have a metal door you could weld it on as well.
  view full answer...