Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
(247 reviews)
Price: $467.46
Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
Retail:$710.00
Our Price: $467.46
You Save: $242.54
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meCustomers prefer these similar products
- All Info
- Reviews (247)
- Q & A (0)
- Photos
Reese Fifth Wheel Hitch
- Fixed Fifth Wheel
- Reese
- Aftermarket Below Bed Rails
- 16000 lbs GTW
- Standard - Double Jaw
- Double Pivot
- 4000 lbs Vertical Load
- 13-1/2 - 17 Inch Tall
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Wide-stance, 1-piece legs are stable and supremely easy to remove. Rails and installation kit sold separately.
Features:
- 2-Jaw locking system provides more jaw-to-king-pin contact than slide-bar models
- Less rattle
- Greater security
- 4-Way pivoting head eases hookup on unlevel ground
- 3-1/2" Height adjustment
- Simple installation and removal
- Wide stance, 1-piece legs offer excellent stability
- Black powder coat finish resists corrosion
- Locking handle has cushioned grip
- Above-bed rails and mounting kit sold separately
- Fits Curt, Valley, Draw-Tite, Hidden-Hitch and Reese base rails
- Cut installation time in half by using a vehicle-specific bracket kit instead of the universal kit
Specs:
- Gross towing weight: 16,000 lbs
- Vertical load limit: 4,000 lbs
- Installed hitch height (including rails): 13-1/2" - 17"
- Limited lifetime warranty
Note: This fifth-wheel trailer hitch will not fit pickups with beds shorter than 6' unless used with a Sidewinder. It also will not fit trucks with flareside/stepside bed.
Secure, 2-Piece Jaw
Unlike the more economical slide-bar models, the rounded, 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
30047 Reese Fifth Wheel Trailer Hitch - 16,000 lbs
Item # RP30047
Installation Details
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs - RP30047
Average Customer Rating: 4.6 out of 5 stars (247 Customer Reviews)
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Wide-stance, 1-piece legs are stable and supremely easy to remove. Rails and installation kit sold separately.by: Scott B05/14/2023
This product gets a three based on shipping condition only. etrailer customer service and shipping time was excellent as usual. The shipment arrived 2 days after the order was placed, as promised. However, as others have noted, the product packing is poor. The boxes arrived with significant damage resulting in cosmetic damage to several parts. I haven't put the hitch to use yet but I am assuming it will work correctly. I will leave a followup after I use it.
by: Joe01/04/2024
The hitch arrived nicely packed in two boxes. Very easy to assemble and install on my existing bed rails. I took the RV out for a first run with the hitch, and it performed as advertised. It was a no fuss transaction and the hitch arrived on-time!
by: Joseph04/16/2023
I damage my old hitch on Wednesday and ordered this one and it came very fast had it in on Saturday afternoon and was able to make my east bound trip.
As always etrailer came through for me again. Thank You
by: Tom09/30/2020
I like the pin being surrounded by the jaws instead of just a bar across the back of the pin. The 16K seems to hold the pin tighter and helping to reduce chucking while towing. I had a slider due to when I bought this last 5th wheel, it was kind of forced onto me saying they couldn't let me leave without a slider with a short bed truck. But after I got home, I ordered a Reece Sidewinder, of which I had one on our first 5th wheel back in 2007. This is my third sidewinder and wouldn't pull without one. The Reece 16K hooks up good and towing without the worry of turning to sharp when getting fuel are days gone by, thanks to these 2 combined together.
The first Reece 16k I received had something just not right and I was having a heck of a time trying to hitch up. Sent Nicole here at eTrailer a picture of the jaws a little misaligned. Nicole got back with me quickly and we had a short conversation, and just a few days later I received a replacement head. That's service!!
by: Bob08/09/2021
The first hitch arrived damaged in shipping. The dent was minor but it was on the receiver plate so I asked to return it.
A lot of vendors would have pushed back on an 89 pound box being sent back but the etrailer team set up the return and shipment of the new hitch. No problem.
The new hitch arrived in good shape this afternoon. It took me about a half hour to install with normal tools and a torque wrench. Directions were clear, the parts fit, and I appreciate having the knowledgeable people at etrailer to fall back on.
There are a lot of things owners can fix themselves with the support of quality products, knowledge, and great customer service etrailer delivers.
by: Joe H.03/31/2019
Delivery was fast and packaged well.
This is my first 5th wheel hitch and has worked great for me pulling a shorter camper with a long bed 3/4 ton truck. Nice height adjustability to match the truck with the trailer. Good solid feel while pulling.
by: Ralph07/08/2020
Product is good quality as it appeared --5th wheel itself was not delivered with rest of kit--arrived three days later. Installation easy.
Installation kit fits perfect-easy installation. Only variable was I had pre-existing air springs , so I had to mark and drill the frame brackets and install the air springs on the outside of the brackets--no big deal--worked out fine
by: Louis03/16/2020
I spent a whole day installing the Reese 16k hitch and custom quick mounting rails in a 2020 F150. Video was great and I advise you to watch it a couple of times before installing. Paper instructions not so good. If you have a 36 gallon fuel tank, I recommend you to do this install on a lift. I do not recommend you to install on your garage floor especially if you are 67 years old, still sore from laying on my back. You must remove spare tire and heat shield. I installed with tires on and very tight working around large fuel tank area. Going on a test drive to see if everything holds together.
by: Marcus03/31/2022
Because it was a new model truck, finding the right hitch became a challenge. etrailer was very helpful in sorting it out. 4,000 miles later we are happy campers
Marcus
4/1/2023
Very well
by: Greg 04/11/2024
I very much appreciate the expedited shipping and the follow-up. Appears all made it in good shape. Have put you guys on my favs along with Harbor freight,
Home Depot, Cabella's, and Big 5.-----Tell more when installed. Will only use on occasion at Tree Farm.
by: Daniel03/10/2018
Looks like this is going to be a perfect fit for what I need to pull my 2011 Rockwood Signature Ultra Lite 8265WS, 5th wheel trailer with the Revolution pin box. Just had it installed & after many years of driving truck with a 5th wheel, I can tell this is a good sturdy 5th wheel & looks good too.
by: Gary 03/05/2023
Excellent hitch for pulling my 5th wheel. Unhooks a lot easier than my last hitch. My last hitch would bind up and pin would not release at jaws. I would have to move truck up or back to get it just right for it would release. I’m not having that issue with this hitch. Major plus for me!! E trailer is good to work with. It was back ordered a few weeks but overall happy with the hitch.
by: Nancy04/19/2023
Legs were not as heavy and our original 15k. Difficulty getting one of the legs into the original rails. Slight difference in center to center. Release does work much smoother than our old hitch As for etrailer, the hitch arrived in three days, No shipping charge. Great service.
by: Terry07/24/2023
The hitch had several large scratches on the front leg decals and a lot of smaller scratches and dings on the painted surfaces. This was caused by inadequate packing materials. The parts should be packaged so they are not allowed to touch and rub against each other during transit. One of the mounting pins did not have a machined groove for the locking clip. I had to use an old pin I had from the hitch I replaced. I would like to get a replacement pin that has a groove for the locking pin as the one I'm using is 20+ years old. I had to drill out the hole for the cotter pin that attaches the handle. The pin would not go through until I drilled it out. On the flip side the hitch is what I expected it to be and seems to be well built and should do what I need it to do. I gave you 3 stars due to the packaging issues and the pin with no groove.
by: Adam04/09/2021
Nice hitch, relatively easy to assemble & install, took about 1 1/2 hours. Will be trying it out this weekend.
by: Stan04/21/2024
Everything is good
Hardware bag broke open being shipped
Couple #8nuts where missing
Everything go to go
by: Troy 07/20/2021
The hitch was installed on Valley Rails which was previously installed on my 2004 Silverado 3500. The hitch fit on the rails and during the first pull performed outstanding. I pull a 41ft 5th wheel and I am impressed with the double jaw lock.
Troy
7/20/2022
After a year The Hitch is performing outstanding! I have pulled my RV approximately 2000 miles and no issue. RV is a 42 ft 5th wheel.
by: Roger T.03/03/2016
After getting the rear rail installed, I used the hitch to set the front rail. I worked perfectly. I can remove the hitch without any binding. This was a problem with my old hitch on my old truck that was installed by the service department where I bought my original 5th wheel trailer.
This is basically the same hitch as I had before on my old truck and I had no problems with it after towing approximately 37,000 miles over 15 years so I expect that this hitch will give me the same service.
Roger T.
3/3/2017
This hitch is now in my 2016 RAM 3500 and functioning perfectly.
by: Ron01/05/2017
The hitch has worked as expected. I would expect nothing but from Reese. During our last trip the hitch started to creek so I removed the top and applied a little grease. This unit is working in conjunction with a Revolution king pin box on our 5th wheel. We are very pleased with this unit for our application.
Etrailer has been our go to place for many trailering items. I would recommend them overall for customer and product performance
Ron
1/6/2018
Wow, thanks for the product follow up. We have used the Reese hitch a lot this past year traveling out west into South Dakota, Wyoming, Colorado etc. Hitch has worked perfectly. For a while I did take advantage of the RVs revolution hitch but found that it was to stressful on the hitch and more difficult to connect to the hitch so I have gone back to a standard 5th wheel configuration. etrailer is my go to supplier for RV stuff unless I have an emergency and need to act on a failure immediately.Anyway thanks for the follow up. Everything is working well here. Just trying to keep warm
by: Philip 01/27/2023
I'm sad reese is made in CHINA! the one leg is not drilled on both sides, i can fix it myself Etrailer is awesome!
by: Lance07/08/2023
Another case of Reese's failure to package their products properly. What used to be bright and shiny delivered scratched, covered in areas of the paint rubbing on cardboard. Screws missing, release handle bent to where it wouldn't slide over the rod. Hammer marks on the legs which would seem to indicate someone already tried to mount it and returned it. 30 minute job turned into 2hrs of cussing. But at least it showed up in two days. I hope whoever bought out Reese brings a better process to the market, but the chances I'd buy it are pretty slim.
by: Shawn08/28/2019
Great fifth wheel hitch for the money. Gives a much smoother ride than my previous Reese than only rotated front to back. The customer service from etrailer was second ton none. I will definitely purchase from these folks again.
Shawn C.
8/29/2020
Still satisfied
by: Greg 08/19/2018
Great 5th wheel hitch and best price I could find. It fit into the rails on my 2012 Ford F250 perfectly. Very pleased with ETrailer's fast delivery and reliable products.
Greg
8/19/2019
I’ve used this hitch to tow my 36 ft 5th wheel over 5000 miles. It has been a very solid and reliable hitch. I’m very pleased with it.
by: Rick04/08/2023
etrailer blows the competition away! I don’t even know how it’s possible to order and receive a product as fast as I did. Thank you etrailer. You have all my future business.
by: Pat 04/13/2020
Hitch arrived well packaged. Easy assembly and it fit right in to my existing rails for the Lil Rocker hitch I was replacing. I haven't towed with it yet but look forward to the security of the jaw clamp over the slide bar.
Pat
4/15/2021
No issues with the hitch after many trips with it.
25
247
Show More Reviews
See what our Experts say about this Reese Fifth Wheel Hitch
- Replacement Crossmember for Reese 16k 5th Wheel Trailer Hitch 30047According to my contacts over at Reese replacement crossmember # RP58147 does fit hitch # RP30047 along with some other Reese hitches so it will work for you. Any time you start to see that egg-shape appear that means it is time to replace the worn parts so good eye!
view full answer... - Will Reese 5th Wheel Trailer Hitch # RP30047 Fit 2014 Ram 3500 Dually Without Factory Rail KitYes, the Reese 5th Wheel Trailer Hitch # RP30047 and custom-fit bracket kit # RP56010-53 that you referenced are compatible with your 2014 Ram 3500 Dually without the factory 5th wheel rail kit. The install kit will save you time (and drilling) as compared to universal-fit install kits and the linked article will give you installation tips.
view full answer... - Is A Slider Hitch Needed When Towing A 1998 Coachman Catalina With A 2006 Chevy Silverado Short BedOn your 2006 Chevrolet Silverado, if you have the 6-1/2 foot short bed you will want to use a slider hitch like the Reese 16K Fifth Wheel Trailer Hitch with Round Tube Slider, part # RP30075, and the Reese Quick-Install Custom Base Rails and Installation Kit, part # RP50064-58. When a short-bed truck (under 8 foot) is used to tow a fifth-wheel trailer, it is recommended that a slider fifth wheel hitch and an extended pin box be used to help compensate for the reduced turning clearance....
view full answer... - Installation Video for Reese Universal 5th Wheel Trailer Hitch Installation Kit for Ford Super DutyWe have a video showing the Reese universal installation kit # RP30035 being installed on a 2002 Ford F-250 that might help, but none on a 2008. Custom kits are easier to install because they require less drilling and are contoured to the truck frame rails and designed to go around any obstacles in most cases. You could save some money and go with a Curt custom installation kit # C16448-204 which will accept Curt, Draw-Tite, Hidden Hitch, Reese, Pro Series, Valley and Husky 5th wheel hitches...
view full answer... - Can a Standard 5th Wheel Hitch be Used in a Ford Truck with 5th Wheel Prep KitThe Ford 5th wheel prep kit is designed to be used with the Reese M5 Series 5th Wheel Trailer Hitches, like part # RP30921. You can install an above bed fifth-wheel hitch that fits into standard above bed rails, like part # RP30928, in the Ford 5th wheel prep kit, with the addition of an adapter, # RP30156. Most standard fifth-wheel hitches will work in this adapter, as long as the tab spacing on the fifth-wheel legs is 20-5/8 inches or 29 inches on center, see photo link.
view full answer...
- Reese Hitch Recommendation for a 2007 Toyota Tundra 5.5 Bed Towing a Open Range Light TrailerI did a little research on the pin box that is on the Open Range Lite fifth wheel and it does look like you could tow one of their trailers with your 2007 Toyota Tundra with a short bed. For a hitch for your 2007 Toyota Tundra with a 5.5 ft bed I would recommend you get a Reese 5th Wheel Trailer Hitch # RP30047 and Reese Rail Kit # RP30035-309. This hitch provides excellent jaw-to-king-pin contact with a 2 jaw latching system. If you were to ever try and tow a different trailer you will...
view full answer... - Rail Adapters Needed For A Reese Hitch In A 2016 Ford F-250 Super Duty With OEM Prep PkgIf you want to use the Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000lbs Item # RP30047 and drop into the factory puck system you'll need the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches - 20,000lbs Item # RP30156. Since you do have a 6-3/4' bed I do recommend switching to a sliding hitch or a sidewinder pin box. For the sliding hitch I recommend the Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000lbs # C16521 with the Adapter Rails...
view full answer... - Troubleshooting Hard to Close Jaws on Reese 16K 5th Wheel HitchThank you for the photo of your Reese 5th Wheel Trailer Hitch # RP30047. The regular maintenance of this 5th wheel hitch calls for using a lubricated skid plate or grease on the surface of the hitch and then also engine oil to lubricate pivot points of moving parts within the hitch prior to each use. You should also be checking the hardware for every 1,000 miles of use. If you haven't been keeping up with the maintenance then you'll want to try to work some oil in the moving parts and...
view full answer...
- Parts Needed to Add Reese 5th Wheel & Firestone Ride-Rite Air Bags to 2015 Toyota Tundra CrewMaxWe can get your 2015 Toyota Tundra CrewMax set up to tow a 5th wheel trailer with a 16,000 lb Reese 5th wheel hitch and Firestone Ride-Rite air bags. These are great choice as Reese is well-known for the quality of their 5th wheel hitches, and the Ride-Rite air bags are compatible with 5th wheel hitch so your Tundra is going to get the support it needs. Here are all the parts that will fit your Tundra so you can get hitched up and hit the road: - Reese 5th Wheel Trailer Hitch # RP30047 -...
view full answer... - Can a Sidewinder be Used with Pullrite SuperGlide Hitch in a 2016 Toyota Tundra with 5-1/2 Foot BedA regular air ride pin box doesn't give you any additional clearance but a Sidewinder does. It will move the pivot point of the trailer back 22 inches so that it is always turning 22 inches back. The only problem is that a Sidewinder cannot be used with a SuperGlide hitch since that hitch slides automatically. If you can lock out the SuperGlide to keep it from sliding it could work but Reese still does not recommend it. So you could change the hitch but your SuperGlide is the standard...
view full answer... - How To Install The Reese Replacement Spring, # 30776, On A Reese 16K Fifth Wheel HitchUsually, these springs should not have to be replaced unless they are damaged. You will want to check the Reese Replacement Spring, # 30776, and make sure it is not damaged and check the Reese 16K Fifth Wheel Hitch, # RP30047, to make sure that there is no other damage to the hitch. The springs are located in the head assembly. One goes from one side of the hitch jaws to the other side. The long side of the spring (hook furthest from the coils) attaches to a pivot point on the flat rod...
view full answer... - Best Slider Fifth Wheel Hitch Recommendation for 2004 Dodge Ram 3500Since your 2004 Dodge Ram 3500 is a short bed you will need a slider hitch to allow you to make tight turns. Since you will have to hitch up at an angle occasionally that means you won't be able to use an automatic sliding hitch. The Curt A16 slider part number # C16521 with the custom install kit part # C16420-204 would be a great choice. Not too heavy and a solid choice for a hitch with a custom install rail kit. The Reese 20k Slider hitch part # RP30083 is one of my favorite choices....
view full answer... - How to Determine Which 5th Wheel Trailer Hitch Works Best on a 2012 Chevy Silverado 1500If you happen to have an 8 foot long bed, I recommend the Reese fifth wheel trailer hitch # RP30047 because of the 2-jaw latching system. The gross towing weight is 16,000 pounds and tongue weight is 4,000 pounds. If you happen to need a rail kit, you can use the custom kit # RP50064-58. If you have a 6-1/2 foot bed, the sliding hitch # RP30051 will provide 10-inches front to back travel for better turning clearance. It will also have the 2-jay latching system providing you more jaw to...
view full answer... - Recommended Sidewinder and 5th Wheel Hitch Combination for 2016 Ford F350 & Grand Design SolitudeFor your 2018 Grand Solitude 310GK and your 2016 Ford F-350 short bed, I recommend the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP50026-58 which are a perfect fit for your truck. Then I recommend the Reese 5th Wheel Trailer Hitch - Dual Jaw - 16K # RP30047 which only weighs 97 lbs. Finally you will use the 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder and Turret - 16,000 lbs # RP61422 for a cushioned ride with turning...
view full answer... - Fifth Wheel Hitch Recommendation that Allows at Least 18 inches of Vertical Height AdjustmentYou would want to go with a fifth wheel hitch that has a height range that will allow your trailer to be towed level. If you need 18 inches to allow the trailer to tow level you would need to go with a taller hitch than the part # RP30051. The part # RP30047 would be a much better option that would also allow the trailer to tow level. This hitch also has a cushioned head, a 360 degree jaw design, and a round tube slider that would operate much smoother than a square tube. Between this...
view full answer... - Are Jaws Open Or Closed On Reese Fifth Wheel Hitch When Hooking Up To TrailerIf you have a Reese 16,000-lb 5th wheel hitch you will just need to remove the locking latch on the handle with the jaws closed. If you have a Titan 5th wheel hitch then you move the handle into the vertical position with the jaws closed. Wither the jaws closed and the hitches in the appropriate position you can hook your trailer right up as the jaws will open for the king pin on contact.
view full answer... - Sidewinder with 5th Airborne Recommendation for Grand Design 303RLS 32The 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder and Turret # RP61412 is the correct replacement for you Lippert 1621 that you have installed on you RV, but you have to use a standard fifth wheel hitch with this like the Reese # RP30047 as you cannot use an Andersen Ultimate Connection.
view full answer... - Can Only Standard Fifth Wheel Hitches be Used with Sidewinder Pin BoxSidewinders cannot be used with the Andersen Ultimate Connection part # AM3200 that you mentioned. You'd have to go with a standard fifth wheel hitch like the # RP30047 for use with a Sidewinder. Typically 6-1/2 foot beds are the standard "short bed," but there are a few manufacturers that make truck beds that are 5-1/2 feet long. The Sidewinder is the only way to tow a trailer with a truck that has a 5-1/2 foot bed. Sidewinders are pin box specific so you will first need to know what...
view full answer... - Can Same Fifth Wheel Hitch be Used with Short and Long Bed TrucksShort bed trucks typically require a slider hitch to allow for turning clearance. The shorter distance between the axle of the truck and the cab makes it hard to make a tight turn without the nose of the trailer hitting the cab of the truck. So a slider like the Reese part # RP30075 can slide back when in a parking lot to give you the clearance you need. Whereas if you have a long bed you wouldn't need a slider and a part # RP30047 would work fine. That said a slider hitch can be used...
view full answer... - Towing Capacity and Fifth Wheel Hitch Recommendation for 2018 Ford F-150Since the sticker on the truck says you have a towing capacity of 12,700 lbs you really are fine as long as you keep the weight of the trailer and everything below that figure. I'd maybe look for trailers with a dry weight under 10k, but it really just depends on the needs you have for the trailer. If you have a long bed truck you can use a stationary hitch like the Reese # RP30047 which has a 16k capacity and would work well. For a rail kit you'd then want a custom install kit like the...
view full answer... - 5th Wheel Trailer Hitch and Installation Kit Recommendation for a 2007 Toyota Tundra CrewmaxThe first important thing to mention is that if using a Sidewinder, you would use a stationary hitch and not a slider. A slider could essentially be used if it remained locked in the towing position at all times, but then you just end up with a stationary hitch. The reason a sidewinder and slider cannot be used together is because the amount of stress on the trailer, hitch, and truck would be too great. You can certainly use the Reese 16k 5th Wheel Trailer Hitch, # RP30047. You would need...
view full answer... - Sliding Fifth Wheel Hitch for a 2017 F-250 Super Crew with 6 3/4 BedSince you have a Keystone trailer with the Turn Max technology you don't need a slider at all actually. Manual or automatic slider would not be needed. With fifth wheel hitch you actually don't really need them to sit higher than the bed rails of the truck. It's actually the opposite in nearly every situation that the hitch sits below the top of the bed rails. The pin box of the truck extends down far enough to compensate for that. The Reese fifth wheel hitch part # RP30047 is a similar...
view full answer...
- Replacement Spring for Fifth Wheel Trailer Hitches Installation InstructionsDue to the location of the springs in the head of the fifth wheel it would be very difficult to get a picture that would be helpful to you. I can describe where they are located in a hitch and how to install Replacement Spring, part # 30776. The springs are located in the head assembly. One goes from one side of the hitch jaws to the other side. The long side of the spring (hook furthest from the coils) attaches to a pivot point on the flat rod closest to the jaws. The spring then goes...
view full answer... - Recommended 5th Wheel Hitch and Custom Rail Kit For 2015 Ram 1500For your 2015 Ram 1500, I recommend the Reese Quick-Install Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches, # RP50142-58. There is no frame drilling required with this custom rail mount kit. The installed rails are rated to meet vehicle manufacturer's tow ratings. For your hitch, I recommend an option with a dual jaw design to ensure greater contact with the king pin to reduce jarring and chucking, the Reese 5th Wheel Hitch # RP30047. I also recommend the Bargman...
view full answer...
Do you have a question about this Fifth Wheel Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Updated by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Shane H
Video by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
5/18/2023
I hate to see the imperfections on the hitch. I will have our Customer Service team reach out. I recommend touching up the hitch with a rust resistant paint like Rustoleum. Over time the hitch is going to experience nicks and scratches from use.