Replacement Fifth Wheel Bumper Installation Kit for Draw-Tite, Hidden Hitch and Reese

Ask the Experts about this Reese Accessories and Parts

• How Many Rubber Bumpers are Normally on a 5th Wheel Trailer Hitch Head
  On Reese models, for example, there are usually 2 bumpers. They can be placed in a couple of different positions. They are used to prevent the the head from contacting the hitch body abruptly which could damage it. Some hitches have additional holes so the bumpers can be moved. If your hitch only has one hole and a bumper in it, then it only requires one. The bumpers are usually located in the rear most holes (towards the back of the truck) since when coupling, the head is tilted forward.
  view full answer...
• Replacement Fifth Wheel Hitch Bumper Kit for Draw-Tite # 6001 Fifth Wheel Hitch
  The Replacement Fifth Wheel Bumper kit you referenced, part # 58089 will indeed fit a Draw-Tite 6001 15K capacity fifth wheel hitch.
  view full answer...
• Dimensions of the Bumpers in the Replacement Fifth Wheel Trailer Hitch Bumper Installation Kit
  I went to the warehouse to pull a Replacement Fifth Wheel Bumper Installation Kit, # 58089, to take some measurements. I have included a picture showing the measurements I took. The diameter of the bumpers at the bottom is 1 inch. They are bullet shaped so they are more narrow at the top as you can see in the pictures. The overall height is between 15/16 inches and 1 inch.
  view full answer...
• Replacement Rubber Bumpers for Pro Series 16K Sliding 5th Wheel Trailer Hitch
  It sounds like you are needing the Replacement Fifth Wheel Bumper Installation Kit # 58089. These are designed for specific model Draw-Tite and Reese 5th Wheel Hitches, but may work on your Pro Series Sliding 16K Hitch as well. The bumpers themselves do measure 1 inch in diameter and have an overall height of just around 15/16 inches. I have included an image with these dimensions labeled. I recommend seeing if this matches the dimensions on your existing bumpers to see if these will...
  view full answer...
• Replacement Crossmember Head Support for Reese 5th Wheel Trailer Hitch 16,000 lbs RP30047
  Actually both the # 30536 and the # 58089 would fit the Reese 16k Fifth Wheel Hitch you have # RP30047. Both of these part numbers are the same product, only difference is that the # 30536 is sold individually and the # 58089 is sold in a pair.
  view full answer...
• Availability of Replacement Rubber Bumper for a Pro Series 16K 5th Wheel Slider Trailer Hitch
  The rubber bumpers on the head of a 5th wheel trailer hitch like the Pro Series 16k, # PS30096, are designed to prevent and/or limit contact between components on the hitch. You can install 2 more but really only 2 are needed. Adding 2 more can limit the maneuverability of the head. They are normally placed in the holes towards the rear of the truck because the head has a tendency to want to tilt that way. Kit # 58089 will fit your hitch.
  view full answer...
• Will the Bumper Installation Kit # 58089 Fit a Reese Titan 16K 5th Wheel Hitch
  Yes, the Replacement Fifth Wheel Bumper Installation Kit # 58089 will fit your Reese 16K 5th wheel hitch whether you have the slider version part 30869 or the fixed version part 30867, both of which have been discontinued. I confirmed the fitment with my contact at Reese.
  view full answer...
• How To Reduce Noise With Pivoting Head of Reese Fifth Wheel Hitch Not Hooked to a Trailer
  The Reese 5th Wheel Trailer Hitch w/ Square Tube Slider part # RP30051 no longer has a lock out kit for the head available. I spoke to Reese and it was something they stopped manufacturing years ago. However, if you are experiencing a lot of noise then you want to make sure your rubber bumpers are not worn down. If you take a look at the exploded diagram of the hitch part 42 are the rubber bumpers that are meant to absorb the movement to reduce the noise. If they are worn out or missing...
  view full answer...
• How Do Rubber Bumpers of Reese 30047 Fifth Wheel Hitch Install
  The Replacement Rubber Bumper for Reese Fifth Wheel Trailer Hitch, part # 30536, attaches to the head with a screw that gets pressed down through the top of it and then is attached on the underside of the head with a nut. I have provided links to the installation instructions for this item as well as a video showing how it is put together. You can see the installation of the bumpers at the 1:35 minute mark of the video. If you needed the screw and nut you could get a Replacement Fifth...
  view full answer...
• Where Does Rubber Bumper Install in Reese 16k Fifth Wheel Hitch
  The Replacement Rubber Bumper for Reese Fifth Wheel Trailer Hitch, part # 30536, attaches to the head with a screw that gets pressed down through the top of it and then is attached on the underside of the head with a nut. I have provided links to the installation instructions for this item that shows how it is put together. If you needed the screw and nut you could get a Replacement Fifth Wheel Bumper Installation Kit for Draw-Tite, Hidden Hitch and Reese, part # 58089.
  view full answer...
• Replacement Rubber Bumpers for Reese 5th Wheel Slider Trailer Hitch # RP30051
  It sounds like you are talking about # 58089. But the L shaped one I am not sure of unless it is part of the handle that got caught in the elbow of the handle and formed an L. Like part # 58094. For the bumpers, on Reese model 5th wheel hitches there are usually 2 bumpers. They can be placed in a couple of different positions. They are used to prevent the the head from contacting the hitch body abruptly which could damage it. Some hitches have additional holes so the bumpers can be moved....
  view full answer...
• How Does the Replacement Rubber Bumper for Reese Fifth Wheel Trailer Hitch, part # 30536
  The Replacement Rubber Bumper for Reese Fifth Wheel Trailer Hitch, part # 35036, attaches to the head with a screw that gets pressed down through the top of it and then is attached on the underside of the head with a nut. If you needed the screw and nut you could get a Replacement Fifth Wheel Bumper Installation Kit for Draw-Tite, Hidden Hitch and Reese, part # 58089.
  view full answer...
• Troubleshooting Movement Side to Side on Reese 16K 5th Wheel Hitch
  For your Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs # RP30047 having play left to right, if you are talking about at the king pin, then you will want the Replacement Jaw Kit for Reese, Draw-Tite and Hidden Hitch Fifth Wheel Trailer Hitches # 58056. If your hitch is working well at the jaws, then the pivot beam # 30565 uses the Replacement Fifth Wheel Bumper Installation Kit for Draw-Tite, Hidden Hitch and Reese # 58089 to help with that issue. I've attached an explosion...
  view full answer...