bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118465
lowest price pledge
Our Price: $49.95
You Save: 43%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 0.8 lbs
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Powered Converter 118465
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system. 1-636-306-4830 to order Tekonsha custom fit vehicle wiring part number 118465 or order online at Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (195)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118465

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.


  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Tow harness with 4-way connector plugs into connection point in rear cargo area
    • ModuLite connects beneath dash
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5.6 amps per circuit
  • 1-Year limited warranty


This custom-fit T-One connector plugs into your vehicle's wiring harness. The connection point for the 4-way tow harness is located in your rear cargo area, on the driver's side. The ModuLite plugs into the factory wiring harness beneath your dash, on the driver's side. Once you've plugged in the ModuLite, insert the included fuses into the built-in fuse holders.

Once installation is complete, the 4-way flat connector will be stowed within the spare tire compartment of your rear cargo area.

It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.

ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.

With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.

T-One InstallationT-One Installation

T-One InstallationT-One Installation

118465 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118465 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118465

Average Customer Rating:  4.9 out of 5 stars   (195 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.


This is a great piece of equipment, simple, useful... I keep myself way of electrical issues, and this Wiring Harness protects your car and yourself.

The Honda Element makes it easy to plug trailer lights and etrailer takes go use of this configurations.

Here one of the beautiful things of this Connector: I lost my trailer lights, I didn’t realize until I stop for gas... I checked the wiring, and it did have power, so I open my driver fuse box and check the Etrailer Connector, well it has fuses, and the fuses were burned out, it looks like I was having a short on the lights, I changed the fuses, reconnect the trailer harness and the fuses burned out again.

That means that I have a problem with the trailer lights. I had to purchased some emergency trailer lights, change the fuses again and voila, it works... so there was a "short" in the trailer wires and the Connector protect my car wallet by cutting the short on the fuses of itself and not let it go all the way to the car fuse box, or computer or battery. That is a great product.

2007 Honda Element

Perfect product. Very simple installation. No tools required. The module plugged into the grey connector under the dash with a zip tie to hold it up. The rear 4 wire connector plugged into the trailer plug in the spare tire well and that was it. Highly recommend this!

Perfectly I could not be happier.
Chandler - 08/30/2022


Plug and play and you're good to go. I'm glad I splurged for the T-one harness. No splicing required.

2008 Honda Element

This is my 3'rd different hitch from and I am once again very pleased! Everything on their website is easily researched and the ease of install was amazing. I backed my SC up on car ramps to make this install extra easy. Two things I would add after my install, (1) Someone had recommended that you install the forward two bolts and all associated washers first. This was a lifesaver! I taped the inner washers on and used those two bolts to pivot the hitch up for marking the small notch that was needed for the SC install. I was then able to cut that notch and keep pivoting it up to check for clearance. Once I hooked up my small trailer, it was perfectly level with the 2 3/4" rise I used for the 2" ball. All bolts lined up easily and were very easy to install by myself. A word of caution,,,, I can open my lower back hatch with the hitch and ball on without issue, you CANNOT open that same lower hatch if the trailer is attached without the bottom door hitting, and probably denting, the door! (2) After installing the two parts of the wire kit, (again, previous installers saved me time,,,, GRAY coupler under the dash! NOT the GREEN one!) I notched the spare tire cover so I can leave the wires out without pinching them. You can run the back wire either out the top hatch or out the bottom. It seems to work better out the top when hooked up to keep the wires from hitting the ground.
BTW,,, my wire hookup didn't work right on first try,,,, It was not lighting up with brakes, or lights, and the turn signals would blink both trailer lights. It turned out to be the ground wire on my trailer was corroded and partially broken! After cleaning and repairing that wire, all was good!! The Master Lock was perfect fit to this hitch receiver and had just enough room to be able to lock, use the rubber cover, and still get the safety chains to attach.
I can recommend this exact setup of parts for anyone looking to add a light trailer hitch to their 2008 Honda Element SC.

Still no issues after a year parking outside on the Florida coast and all the salt air!
Larry M - 04/13/2020


It took a little bit of searching but I eventually found the plug adapter under the front dash. I was able to plug right in and attach the module with the included zip tie. Attaching to the rear was easier. I struggled to remove the plug cover but I eventually figured it out. I just back from testing and everything is lighting up.

2007 Honda Element

Incredibly easy to install. Thanks in part to Honda putting accessory wiring in easy to reach places, and Tekonsha for making this kit for a vehicle as specific as the Element.


I’m so happy my lights now work on my trailer and it was so easy to install! I can now go kayaking with friends this summer and haul all my camping gear without having my kayaks hanging out of my Honda Element! Thank u so much!!!


You did very good. The product looks good. The video's on the tracking page are great. I have not installed it yet. The box did end up with a whole in it with the hitch popping out.


Good materials and workmanship, instructions allowed easy installation. Like all this type product, the slip-in coupler rattles when the tongue weight is small, like with an empty trailer. Turn up the stereo.


After a year of owning the wiring harness all is well and still functioning from the day 1.

2007 Honda Element

Great product, arrive in a timely matter as told, installation was a bit tricky even thou instructions were very simple to read, keep in mind readers aftermarket products are not factory so many times it will take a bit of twitching to make it right, in this case i had to use 8 washers to make it a tight fit instead of the 4 provided... Not a big deal ... Again it is to expect in an aftermarket product... Very satisfied with the hitch electrical was a breeze to install .. Definitely recommend this product..

2010 Honda Element

The plug is above the brake; next to the outside wall; wrapped with blue tape; very easy to find.

The module box is attached behind the brake on the front wall; no problem.

In the rear the wire is very easy to find. No problem


Worked exactly as it was supposed to. Easy to install . Only took a few minutes

2005 Honda Element

The service was excellent. Shipped quickly, but the delivery was delayed 2 days because of UPS. This was not an etrailer problem, but a UPS problem. Anyway, my item arrived and now I can get my Honda Element wired and move my trailer. Thanks etrailer. Great service.


It was necessary to drill the holes bigger to fit, otherwise easy to install.

2008 Honda Element

Installation PhotosHere are some photos of the under-dash installation of the 118465 module in a 2008 Honda Element.

Wish Id read this review BEFORE installation. Folks, that grey connector is ALL THE WAY LEFT against the left side of the drivers compartment - the directions make it sound like its just to the left of the steering column - its not.
-- comment by: Ross - 06/16/2013


Easy installation. Works as advertised.

I was concerned that the wiring harness would rub on the edge of the interior of the wheel well, but after using it regularly for a year it is still like new. I use it about three times per month.
JDN - 01/13/2022

2010 Honda Element

Once i figured out how easy it was to install it, things were simple after that. Duh me, yay you! It works!


Easy install and flawless performance

Honda Civic

Your Factory OE Type Kit Works like a champ!! The hookup was easy - the instructions where laid out well and I appreciate the quality of the material like 'OEM' all the way. Customer Service is great too!

This being my second Honda Element I had a Trailer Dealer wire the previous vehicle. Against my wishes, they ran some wires underneath the vehicle and tied them directly to the battery using scotch lock clips which I detest - then the same way to the rear lights - crap job - Avoid a crap job and use E Trailer Products!

Recommended E Trailer to a friend and she bought one of your trailer hitches for her Civic - Loves it and the customer service too!

Peter J - 07/09/2020

2008 Honda Element

The trailer hitch for a 2008 Honda Element that we put on our son's car last year has worked perfectly. Used three times to haul trailers. The cost of buying the hitch through etrailer and then paying a local garage to install it was less than half of any quote I got from the other retailer, the dealership or any other commercial concern. Online videos made the installation easy for the mechanic, and could be installed EXACTLY as described. Highly recommend and will do this for any future cars that need no-drill hitch installations. Great job, etrailer!

The product continues to work perfectly. Have referred two other friends for etrailer hitches for similar scenarios. BIG savings over dealer or trailer specialty shops. Thanks again, etrailer.
Pamelyn - 07/25/2018


works perfect!


Element SC owners: Very easy to install, but Watch the Video! Made the mistake of finding the wrong 10-pin and calling to question the thing, but customer service put me back on track, and recommended the video, which helped a lot, the correct 10 pin is buried on the far left of the console in my SC, and then the whole shebang took about 5 minutes to install. Easy! Going to drill and caulk a hole for the wiring, so I don't have to ghetto drape the harness out the window.

Thank you!!

What do you mean by 10 pin?
-- comment by: Cody B - 04/07/2013


The reference material was very helpful to read even before my hitch and wiring harness arrived. Especially helpful were the reviewers' comments giving their experiences. The hardest part in the installation was finding the jack under the dash but I only had to look a second time.

Wonderfully. I turned one of my neighbors onto it as well. He has the same vehicle and saw how easy it was especially with the detailed instruction. Used it twice this past weekend.
Glenn W - 07/09/2014


Fast shipping and ez install plug n play

Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Will T-One Vehicle Wiring Harness 118465 Fit a 2008 Honda Element SC
    The T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, part # 118465, is a custom fit part for the 2007-2009 Honda Element SC. I am completely confident it will fit your vehicle. The connection points are located under the dash to the left of the steering column and in the spare tire compartment see instructions.
    view full answer...
  • Location of Under Dash Connector for Installing T-1 Harness on a 2009 Honda Element
    You are having a common difficulty with this wiring harness. You have found the wrong connector. There is another connector which is also wrapped in blue tape several inches to the left of the access panel opening. You will have to reach in and look further to the left.
    view full answer...
  • How Do I Wire My 2008 Honda Element for Trailer Lights and Why is There a Converter Under The Dash
    Your 2008 Honda element is set up differently than most vehicles and has a 10 pin connector under the dash to connect the converter to. This connection is essentially a loop circuit that powers the vehicles tow package wiring to the rear spare tire compartment. The converter that is attached to the under dash 10 pin connector is there to protect the vehicles wiring and convert the 5-wire system on the Honda to a 4-wire trailer lighting system. Once you have the part connected under the...
    view full answer...
  • Connector Location for the Converter Box on a 2008 Honda Element for T-One Trailer Harness 118465
    You may have found the wrong connector. It may be difficult to see, but under the access panel, look all the way to the left driver side wall. You will see a gray connector there, but again it may be difficult to see. We also have a video of a 2007 Element that makes note of the location, but even with our video, it is difficult to see because of the location of the connector. I have added a link to the video below.
    view full answer...
  • Where Does a Trailer Wiring Harness Install on a 2006 GMC Savana Van
    The trailer wiring harnesses that fit your 2006 GMC Savana van, see link, plug in line with the vehicle tail light wiring located behind the trim panels in the cargo area on the driver's and passenger's sides. I recommend going with Tow Ready harness # 118392. I have linked a video showing an example installation for you.
    view full answer...
  • Trailer Wiring Kit Recommendation for 2007 Honda Element
    For your 2007 Honda Element the best trailer wiring kit we offer is the Tekonsha kit part # 118465. Of the three brands of kits we offer for your vehicle the Tekonsha kits can handle the most amperage and tend to be the most reliable.
    view full answer...
  • Is a Friction Sway Control a Good Choice for 2007 Honda Element Towing Camper
    A friction control sway bar like the part # 83660 wouldn't hurt your towing setup on your 2007 Honda Element, but if you were asking about a weight distribution system the hitch you have (and all hitches that fit your vehicle) are not rated for weight distribution. Friction sway control units do a great job fighting sway that comes from high winds and passing semis but wouldn't stop persistent sway.
    view full answer...
  • Will T-One Wiring Harness 118465 Fit a 2005 Honda Element
    The T-One Wiring Harness, part # 118465 will not fit a 2005 Honda Element. It will only fit newer models of the Honda Element. You will need to hard wire your 2005 model. We recommend the hard wiring kit, part # 119178KIT, because it provides all the parts you will need to complete the hard wiring installation yourself. I attached installation instructions for you to review also.
    view full answer...
  • Running Trailer Wiring Connector for the 2010 Honda Element to the Outside of the Vehicle
    Yes, you can run the vehicle side trailer connector to the outside of the vehicle if there is a grommet available in the back of the spare tire well. Just make a small slit in the grommet and run the smallest end of the harness through the hole. If you decide to do so you may want to install a mounting bracket to keep the 4-Way connector from dangling behind the vehicle. I would recommend the Mounting Bracket 4-Pole Flat, item # 18144, along with the No-Drill Mount Bracket, Short, item...
    view full answer...
  • Trailer Wiring Recommendation for a 2006 Honda Element
    The # 119178KIT actually replaced the 119175KIT a few years ago, so for your 2006 Honda Element you would want the # 119178KIT. I attached a video that shows this kit being installed on a 2006 Honda Element just like yours for you to check out.
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2011 Honda Element
    Basically the Tow Ready Harness part # 118465 and the Curt Harness part # C56029 are two different manufacturers take on the same wiring harness. Either will work and will accomplish the same thing. I like the Curt wiring harnesses better though as they use a more modern circuit board with makes them a bit more reliable.
    view full answer...
  • Trailer Wiring Harness for 2006 Honda Element
    For your 2006 Element, you will need to use a hardwired converter, like part # 119178KIT. The converter will tap into the factory wiring harnesses feeding your taillight assemblies. The best place to tap the wiring in would be directly behind the tail light assemblies. You would use the circuit tester included with the kit to probe the wires feeding each taillight assembly to determine which wire carries which circuit. Activate the left turn signal, and then probe the wires feeding the...
    view full answer...
  • Does Draw-Tite Hitch # 75659 for 2007 Honda Element Come with Wiring Harness
    The wiring harness is sold separately. I recommend the Tow Ready Custom Fit Vehicle Wiring for the Honda Element # 118465. This harness provides a 4-way flat trailer connector at the back of your Honda Element to power your trailer's signal lights. I have included a link to the instruction details and a video of the trailer wiring harness installation. If you need a ball mount I recommend part # 989900. I have included a link to a video review of this the kit. You will want to check...
    view full answer...
  • Trailer Recommendation to Carry a Motorcycle with a 2010 Honda Element LX
    Since your vehicle has such a low towing capacity you only really have one option for carrying a motorcycle with your 2010 Honda Element. You will have to go with a small trailer since your vehicle would not have the tongue weight capacity for a motorcycle and carrier. For trailer wiring you are going to want the Tow Ready harness part # 118465. For a ball mount you could use the part # 2923 and then for a 2 inch ball part # 63845.
    view full answer...
  • Hitch Recommendation for a 2007 Honda Element to Tow a Motorcycle Trailer
    We have a 2 inch hitch that is confirmed to work on your 2007 Honda Element, Hidden Hitch part # 75659. This should work well to tow a motorcycle trailer with your 2008 Kawasaki KLR 650 loaded on it. For trailer wiring you would want part # 118465. Install video attached. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
    view full answer...
  • Trailer Wiring Recommendation for a 2006 Honda Element
    Since you have a 2006 Honda Element the port you are looking for behind the access panel you are trying to remove isn't there so there would be no reason to remove it. The harness # 118465 is not the correct harness for your vehicle as it would only fit the 2007-2011 models. You will need to use a hardwire trailer wiring kit part # C59496 which would not require you to get behind that panel. I attached installation instructions and an install video for you to check out as well.
    view full answer...
  • Hitch Recommendation for a 2010 Honda Element
    I believe I found the review online where a single customer said he had a problem installing the Curt Hitch part # 13574 on his 2010 Honda Element. I wish I knew more about the issue he was having, but I checked with Curt and they have said that as long as the 2010 Honda Element is not an SC model this hitch should work well and haven't heard of any issues beyond that. So based on that I can safely recommend this hitch for you. I attached an install video for you to check out as well. If...
    view full answer...
  • Class III Trailer Hitch Fit for 2008 Honda Element SC
    Yes, the Draw-Tite 2-inch Class III hitch # 75659 is a confirmed fit on your 2008 Honda Element SC, and it also fits non-SC versions too. This hitch offers no-drill installation, it includes all required hardware and detailed instructions and a helpful video are linked for you to show you the process. If you also need a wiring harness to operate a trailer's lights then you can use 4-pole wiring kit # 118465 which offers plug-and-play installation - no cutting or splicing required! An...
    view full answer...
  • 2006 Honda Element Trailer Wiring Recommendation
    For trailer wiring for your 2006 Honda Element you would want the # 119147KIT as it is a fit. The part # 118465 fits newer Honda Elements and would not work for yours. I wish we had a custom fit harness that did fit your 2006 model but currently we only have the universal type fits.
    view full answer...
  • Trailer Hitch Recommendation for a 2008 Honda Element SC
    For your 2008 Honda Element SC I would recommend the Draw-Tite Hitch part # 75659 which is a confirmed fit and has a 2 inch opening which will give you better capacities and more hitch accessory flexibility. For trailer wiring you would then want the part # 118465 which is also a confirmed fit. I attached an install video for this for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one...
    view full answer...
  • Will T-One Wiring Harness Fit 2006 Honda Element With Trailer Wiring Ports
    I called my contact at our supplier and asked about your 2006 Element. There may have been a change when the car was manufactured and the trailer wiring was added to your vehicle but we really have no way of knowing. Our records indicate the trailer wiring harness for your Element is a hardwire installation. For that you would want part # 119147KIT. If you wish to try installing the T-One Harness, part # 118465 it may work just fine. We cannot guarantee this will work because it does...
    view full answer...
    Image 1 for
  • Trailer Lights Stopped Working When Connected to 2004 Honda Element
    It may not be a fuse that is blown but it could be a converter box. The trailer wiring harnesses for the 2004 Honda Element, see link to the right, all have converter boxes. If there is a short on the trailer wiring or in the vehicle wiring that can blow the converter box. It can also happen if the trailer lights draw more power than what the harness is rated for. A regular plug and play type of harness # 118336 just plugs into the factory connection point. Be sure to check the connection...
    view full answer...
  • Trailer Wiring Harness for a 2006 Honda Element
    That very well could be a connector for trailer lights that you have found on your 2006 Honda Element. However none of the available wiring harnesses for your Element plug into that connector. They are all hardwire options that require splicing into the vehicle tail light wires. But what you can do is use a circuit tester such as # 40376 or a meter if you have one to test the pins or the wires of that connector you found while someone sits in the vehicle to operate the lighting functions....
    view full answer...
    Image 1 for
  • Installing Wiring for Prodigy P3 Brake Controller on a 2010 Honda Element
    The pigtail that comes with the Tekonsha Prodigy P3 # 90195 connects to the following functions: Blue - 7-Way Output to Trailer Black - 12V Power White - Ground Red - COLD Side of Stop Light Switch (only gets hot when brake pedal is pressed) If the vehicle you are installing this on is the 2010 Honda Element that you put in for your vehicle info then you will need a 4-Way connector like the T-One # 118465 and then the Universal Wiring Kit # ETBC7. The blue from the brake controller will...
    view full answer...
    Image 1 for

< Previous

Do you have a question about this Custom Fit Vehicle Wiring?

  • Why

    At we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Shane T
Test Fit:
Shane T
Employee Andrew S
Test Fit:
Andrew S
Employee Alan C
Video by:
Alan C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.