Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
Item # C59496
Our Price: $168.87
Confirmed to Fit
2021 Mitsubishi Outlander
without factory tow package - PHEV models
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (106)
- Q & A (0)
- Photos
2021 Mitsubishi Outlander - Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Universal Fit
- 4 Flat
- Trailer Hitch Wiring
- CURT
- Converter
- 8 Feet Long
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your Mitsubishi Outlander's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Avoids overloading your vehicle's electrical system by connecting directly to your battery
- Power wire and fuse kit included
- Designed with safety in mind
- Guards against electrical shorts, mis-wire situations, and electrostatic discharge
- Splices into your vehicle's wiring with the included quick-splice connectors
- Color-coded wires ease installation
- Resists damage from shock and vibration for superior operation on rough roads
- Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction
- Includes durable, molded-rubber, female output socket with protective dust cover
Specs:
- Application:
- Vehicles with 2-wire or 3-wire electrical systems
- Trailers and vehicles with LED or incandescent lights
- 4-Way harness length: 58"
- Splice-in wire length: 17"
- Ground wire length: 17"
- Power wire length: 20'
- Maximum amperage:
- Turn lights and brake lights: 3 amps per circuit
- Tail lights: 3 amps per circuit
- Wire gauge:
- Power wire: 12
- Limited 1-year warranty
Do I Need A Tail Light Converter?
Some vehicles operate on a 3-wire system, wherein the brake signal and the turn signals run on separate wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) But most trailers run on a 2-wire system, which means the brake and turn signals travel along a single wire. You'll notice that, on your trailer, the brake light will flash for the turn signals.
If your vehicle operates on a 3-wire system, it will need to be converted so it will be compatible with the wiring system of your trailer. This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
Powered by Your Battery
This converter won't overload or cause damage to your system because it pulls power straight from your vehicle's battery. So you can be sure that your trailer lights will activate no matter what type of bulbs your vehicle has - or your trailer, for that matter.
Converter Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn |
| Brown | Tail lights |
| Black | Battery power |
| Red | Brake |
| White | Ground |
| Yellow | Left turn |
Powered Tail Light Converter Installation
This kit comes with all the wiring you'll need to convert your vehicle's lighting system to match your trailer's. The powered converter box has splice-in wires on one end and a harness with a 4-way flat vehicle-end connector on the other. It also comes with a power wire that will connect to your battery so your electrical system doesn't get overloaded.
To begin the installation, use the included circuit tester to double-check the function of each wire on your vehicle's tail light wiring harness. The color/function of the splice-in wires on this converter may not match the color/function of those on your vehicle, so you'll want to be sure to check all of the wire functions first. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in one of the taps and snap the cover down.
Using the included double-sided tape, stick the converter box to a flat surface inside your vehicle near the tail lights. It's helpful to clean the surface first so the tape can adhere fully.
Once the converter box is spliced in, you need to run the power wire up to your battery. Be sure to remove the fuse before connecting anything so you don't blow it! You can put it back in once everything has been installed. To hook up to your battery, you'll need to disconnect the negative cable from your battery and attach the power wire to the positive terminal with the included ring terminal.
Find a raw, unpainted metal surface to use as a grounding point and secure the white ground wire using the included self-tapping screw. Cleaning the surface before securing the white wire will ensure the converter is fully grounded. If you have a 2-wire system, the red brake wire will need to be grounded as well. You can do that in the same way, using an extra ring terminal (sold separately). Finally, secure the converter wires to your vehicle using included cable ties.
Quick Tips:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
Built Using Surface-Mount Technology
Curt builds each tail light converter using surface-mount technology (SMT). This construction method involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a smaller circuit board that provides more routing area and that offers superior performance, reliability, and durability.
Circuit boards constructed using SMT perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, increasing durability and lifespan. In addition, lower resistance levels ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
56496 Curt Mitsubishi Outlander Wiring Harness with Mitsubishi Outlander End 4-Pole Connector and Powered Converter Kit - 58" Long
55151 Powered Converter Wiring Kit
48705 Circuit Tester
Replaces 56146KIT
Installation Details
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit - C59496
Average Customer Rating: 4.7 out of 5 stars (106 Customer Reviews)
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.by: Patricia 02/20/2024
Complete converter. Perfect for my car. Made towing a trailer very safe and easy.
by: Chris 01/18/2024
2023 Ford Maverick
Also a must for newer vehicles with fine gauge wiring to assure adequate current is sent to the trailer lights. Easy to install and works great!!
by: Donald 02/02/2024
Haven't installed the harness yet
by: Matthew05/06/2022
2005 Volvo XC70
I installed this in about 1 hour mostly reading and discovering which wires to use. I went and tested on a standard trailer and all the lights work as expected. With the battery in the back of the Volvo xc70 2005 I didn't have to run the wire to the front so it was even easier to install than most vehicles
by: Daryl 11/14/2023
The hitch was easy to install. But the wiring harness I couldn’t install it. I didn’t want to split the wires.
by: Alan11/07/2020
2004 Mercedes-Benz SLK-Class
Very happy with the trailer hitch and 4-way tail light converter for my 2004 Mercedes SLK 320. I never thought anyone would make one for a sports car, but etrailer does and it works perfectly. I found the etrailer hitch on the "SLK World" website, where other SLK owners have also installed it, and would recommend going there if you have an SLK.
by: Ben05/30/2022
Easy plug and play install. Replaced old version that had a fried converter.
Second time buying from Etrailer, will buy again if necessary. Came in a timely manner.
Ben
5/30/2023
Still in good shape no issues
by: William 11/20/2023
2022 Genesis GV80
This harness worked great and very easy install.
by: Wordash Jones06/15/2023
Product was great! Fit perfectly on my 2022 Kia Sorento Hybrid S Model. I worked at a dealership so I got the hook-up for installation but the product and the service are unmatched at etrailer.
by: Al03/30/2023
I have an older but well maintained Class A RV. I wanted to tow with lights but found out my turn signals were not the same as my brake lights. etrailer had the solution for my problem. Been on 2 cross country trips with the lights module and everything works great !
by: Kelsey 05/14/2023
"Plug and play" towed multiple trailers with no lighting issues very happy with the product.
by: George Jetson04/30/2023
2021 Ford Bronco Sport
Mounted the receiver yesterday. Receiver is very well built. Instructions could have been better. Instructions are clear on where to trim the bumper cover but do not mention modifying the heat shield that is behind it.
Overall a good fit and a well made product.
by: Steve 07/07/2022
Looks to be of high quality
Steve
7/12/2023
100
by: Dave K02/14/2023
Not looking forward to the wiring installation, but the instructions look very good. Curt makes a really great hitch.
by: Erin 05/20/2023
works great!
plug and play!
by: Tim P.10/16/2018
2004 Dodge Sprinter
converter and flat 4 wiring was fine. for my application, the green RH turn signal wire was over 2 feet too short to cross from one tail light to the other. really, add 3 ft to the wire, much less hassle. the power wire from battery to converter is ALSO TOO SHORT, by more than 5 feet. Since that part of the kit is really only the fuse holder and the wire, this was a waste of money. NOT AT ALL WHAT I WOULD CALL A UNIVERSAL FIT.
Heather A.
10/27/2018
This wiring harness part C59496 is considered a universal fit because it is not a plug and play custom fit application. It can be hardwired into many different vehicles. If you needed extra wire for your vehicle, I recommend part # DW02412-1 for extra 14 gauge wire.
Helpful Links
by: Bryan 10/08/2022
2016 Volkswagen Jetta
Got this for a 2016 Jetta. Instructions say to run this outside and under the car, but found it easier to run up the left side in the interior, tucking under the trim pieces and through the steering boot to the fuse box. Works great!
by: Tony10/12/2023
Great customer service
by: David07/20/2023
Functional piece of equipment. Was easy to install.
by: Christopher 07/25/2023
Worked as advertised and easy to install
by: Steven04/27/2022
2008 Lincoln Town Car
The trailer lighter converter doesn't seem to work the brake lights after installation. I will be contacting customer service about this issue.
Sierra K.
5/4/2022
Before you test the harness with a circuit tester like item # PTW2992 can you please remove the fuse on the power wire for 30 minutes, then reinstall it. This fuse should be located close to the vehicle battery in a fuse box. If the powered converter box has engaged its circuit protection feature, this will reset the box unless it was overloaded and it was damaged.
Helpful Links
Steven
5/4/2022
I wish to apologize thinking there was an issue with the converter when there wasnt, the next day I did a check and because I infact thought I needed to connect the brake red wire directly to the brake switch and not the multi-purpose red and green wire on my 08 Lincoln. It works great when you wire it correctly.
by: Juan04/20/2021
The Curt trailer hitch has been perfect- i also purchased the light system to connect to the trailer - it took me a whole day to install and i am thankful for the detailed videos for the hitch and lights. I only got help with the hitch when lifting it into position as i do not have a hitch jack. I think the hitch is top quality and I am confident to pull anything-
by: Ej02/12/2019
2017 Mercury Tracer
Contains all you need to make this work. Used it on my 2017 GLE350 that has LED tail lights using combined brake and signal lights. Figuring out the correct wires to connect to was a bit trial and error. Running the wire from the module to the fuse box below the rear passenger seat took some time as well. But the setup works without a problem.
Wires:
Brake (red): connect to ground.
Lights (brown): right tail light, white with blue tracer.
Right turn: right tail light, gray/black wire
Left turn: left tail light, gray/black wire.
Ground: at rear of the car, between tail light and spare wheel well.
12V power: below rear passenger seat, using the big screw connector/cable visible there.
Good luck!
by: KPT07/10/2022
Works well - installation isn't hard after you figure out where to mount the unit and identify which wires in the vehicle harness are needed to attach the converter.
The tester probe is pretty much useless as it's hard to see. I ended using my own test tools (multimeter) to confirm its operation.
Rather than drill holes in the vehicle. I keep the harness inside the vehicle and pull it out when needed.
by: Walt 04/05/2023
Great looking product can't wait for in stallation
25
106
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Trailer Hitch Recommendation for 2008 Chevy Express Van with Cutaway ChassisFor your application I recommend checking out the Multi-Fit Motorhome Trailer Hitch # 5350 which can fit frames up to 24" - 46" wide and has bolt holes that measure 8-5/8" apart on center (see attached). All of the custom fit hitches for a 2008 Chevy Express Van won't fit the cutaway chassis which is why you need to look into more of a universal fit like this. The mounting brackets for this hitch are adjustable to fit different applications so you'll need to make sure this works for your...
view full answer...
- Trailer Hitch, Wiring, and Accessories for a 2013 Ram 1500 SLTFor your 2013 Ram 1500 I recommend Class IV trailer hitch # 14374. It is rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight. When used with weight distribution it is rated for 1,200/12,000 pounds. Check the truck owner's manual for the truck's capacities and go by the lower of the 2 ratings, the hitch or the truck. I also recommend etrailer ball mount kit # EBMK2416. It comes with a ball mount with a 3 inch rise or 4 inch drop It also includes a 2 inch ball, 2-5/16...
view full answer... - Trailer Hitch Recommendation for a 2003 Saab 9-3 ConvertibleThe Curt Hitch part # C11326 is listed as a fit for your 2003 Saab 9-3 convertible unless it is the SportCombi model or unless it has dual exhaust. For trailer wiring you would the part # C59496. For a ball mount part # 36053 and then for a 2 inch ball # 19258 or 1-7/8 inch ball # 19256.
view full answer... - Trailer Hitch Recommended for 2020 Mitsubishi Outlander Plug In HybridWe do indeed have a hitch for your vehicle. According to Curt, their # C13398 Class III hitch is a fit for all models of the 2020 Mitsubishi Outlander PHEV (plug-in hybrid), including the GT model. If you'll be using the hitch for towing purposes, you'll also need a trailer wiring harness like # C59496 if the vehicle isn't equipped with the factory tow package or # C77KR if it IS equipped with the tow package. If you're not sure how your vehicle was equipped, your Mitsubishi dealer should...
view full answer... - How To Install Tekonsha Prodigy P3 Trailer Brake Controller on 2013 Cadillac SRXI do have an option for you but there is no trailer brake controller port under the dash on a 2013 Cadillac SRX. In order to install the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 you will need to hardwire using a few different parts. I have attached a list with these below. Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 56096 (With Tow Package) Curt Upgraded Circuit Protected Powered Tail Light Converter part # C59496 (Without Tow Package) Universal...
view full answer... - How To Install Trailer Brake Controller and 7-Way Trailer Connector on International 4300I have a few different options for you, an air controlled trailer brake controller like the Hayes Air Actuated Trailer Brake Controller part # HA100400C or an electric controlled trailer brake controller like the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. If your local state laws require the brake lights to be illuminated when the engine (jake) brake is activated then you'll want to go with an air controlled trailer brake controller as this is the only option that will do...
view full answer... - Install of Draw-Tite Class III 76183 on 2019 Audi Q5The Draw-Tite Class III hitch, part # 76183 is a confirmed fit for your 2019 Audi Q5. We can complete the installation at our facility in Wentzville, MO if you find yourself passing through the St. Louis metro area. I don't have any specific recommendations for your area, but any trusted mechanic should be able to complete the installation for you without difficulty. I've linked to the install instructions and an install video. If you'll be towing with the hitch, you'll also need a trailer...
view full answer... - 4-Pole Wiring Harness for 1999 GMC JimmyIf your 1999 GMC Jimmy does not have a round U.S. Car connector tucked up under the bumper or spare to allow you to plug in a part like # 118384, or a bundle of wires you can connect to a 4-pole part like # HM41225 you can still install a trailer harness by splicing to the signal wires at one of the tail lights. The best option is to hard wire a universal powered harness like # C59496 which will isolate and protect the truck's wiring from any potential shorts on the trailer. This is a...
view full answer... - Recommended European 7-Way Round to 4-Way Flat Wiring Adapter for 2006 Porsche CayenneIt sounds like you will instead need the Tow Ready # 118710. This plug adapter will fit into the 7-way round European-style trailer connector with recessed sockets and adapt it to the 4-way flat you desire. The only catch is that this harness will only work for combined wiring so you will want to check your factory harness by testing the pins with a circuit tester like # PTW2993 to see if both the brake and turn signal are carried on the same pin. If they are then this adapter will work...
view full answer... - Class 2 Or Class 3 Hitch For 2020 Mitsubishi Outlander PHEV For your 2020 Mitsubishi Outlander PHEV the Curt Trailer Hitch Receiver Part # C13398 is going to be your only option at this time. It is rated as a Class 3 hitch that provides a tongue weight rating of 350 pounds, and a maximum tow rating of 3500 pounds. Although I would not recommend towing more that the manufacturers tow rating for your vehicle. If you are planning on towing a trailer, I also recommend the Curt Upgraded Circuit Protected Powered Tail Light Converter Wiring Kit Item...
view full answer... - 2017 Nissan Armada SV Trailer Wiring RecommendationSince your 2017 Nissan Armada does not have trailer wiring currently what you'll need is a hardwire style 4-way kit tested as a fit for your vehicle like the part # C59496. This taps into the taillight circuits of your vehicle to give you the 7-way you need. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller....
view full answer... - Availability of Brake Controller Harness for 2018 Jeep JL Wrangler UnlimitedI spoke with my contact at Tekonsha regarding your 2018 Jeep JL Wrangler Unlimited. At this time, there is not currently a Plug-In Brake Controller Harness available for this model Jeep. He was not sure if the JL model is even equipped with a factory port that a plug-in harness would connect to. You can check beneath the dash of your Jeep to see if one is present. Your only option right now will be to simply hardwire a brake controller to your Jeep. If you do not already have a trailer...
view full answer... - Can the Curt Trailer Hitch Part # 13333 Be Used for a 3,500 Lb Boat on a 2018 Ram 1500 ExpressThe Curt Trailer Hitch Receiver part # 13333 is a confirmed fit for your 2018 Ram 1500 Express and will be more than capable of allowing you to pull your 3,500 lb boat as it has a 6,000 lb gross trailer weight (GTW) rating. You will not need to use a trailer hitch that attaches directly to the frame like the Curt Trailer Hitch Receiver part # 13374. I have attached an install video on the above hitch for you which as you can see, is very simple and straightforward. If your Ram did not...
view full answer... - 4-Way Trailer Wiring Harness Recommendation for a 2000 Chevy SilveradoFor your 2000 Chevy Silverado if you do not have any trailer wiring present on your vehicle you will need to hardwire in a 4-way with the part # C59496 that has been confirmed as a fit. I wish there was a custom fit plug-in style of connector for your truck, but this will be your only option.
view full answer... - Recommended 2" Hitch for a 2010 VW Jetta SportWagen Yes, there is a 2" hitch for the 2010 Jetta SportWagen. It is the EcoHitch item # 306-X7284. This hitch is custom fit and bolts to your VW with included hardware. It fits both the standard gas and diesel models. I have linked an installation video below. If you are planning on towing you will also need a wiring harness item # C59496 and a ball mount kit item # C45534.
view full answer... - How to Install a 7-Way Wiring Harness and Brake Controller on a 2008 Land Rover Range Rover HSEI have everything that you will need to install a 7-way trailer connector on your 2008 Land Rover Range Rover HSE but they do not make any direct plug and play kits if that is what you are looking for and you will need to use an adapter. For starters, you will first need to hardwire a 4-way trailer connector into your tail lights and for this I recommend using the Vehicle Wiring Harness Kit part # C59496. Once this is installed you will then need to use a 4 to 7-way adapter like the 7-Way...
view full answer... - Does Curt Trailer Hitch for 2000 Lincoln Town Car Come with the Mounting HardwareYes, all of the hardware needed for installation is included with Curt trailer hitch # C12130. If you plan on doing some towing you can use the nifty Curt Euro ball mount # C45592 for a 2 inch ball or # C45591 for a 1-7/8 inch ball. And for trailer wiring you can use # C59496 to add a 4-Way flat to the rear of the vehicle.
view full answer... - Curt Trailer Wiring Harness part # 56146KIT Recommendation to Convert Separate Signal to CombinedYes there is, you would need to install the Curt Trailer Wiring harness part # C59496 on your ambulance and it will convert the separate trailer wiring to a combined signal that would work well on your trailer. I attached installation instructions and an install video that shows a typical installation to show you how to test the circuits and install this harness.
view full answer... - How Do I Wire a Trailer Light Converter to a 1994 Toyota Pickup 22REYou do need a converter for that vehicle. We have a T-1 connector, part # 118379 that would simply plug in behind the tail lights of your truck, with no cutting or splicing required. You could always cut off the 4 way flat connector and wire in the 4 way round, if you wish. Just make sure the vehicle side and the trailer side are wired the same.
view full answer... - Wiring Harness for 1996 Cadillac Fleetwood Brougham Hearse for Use with LED Trailer LightingWe offer 4 Pole Harness # C59496 for your 1996 Cadillac Fleetwood Brougham Hearse. This hard-wire converter includes a circuit tester to assist you in identifying the vehicle wires to connect. This converter will safeguard itself and the tow vehicle against harmful electrical shorts and mis-wire situations. It will work with LED trailer lighting. I have linked the written instructions.
view full answer... - 7-Way Wiring Harness for 2013 Ram 1500Yes, the Pollak 7-Pole and 4-Pole Trailer Connector # HM40975-11998 could be hardwired to your 2013 Ram 1500 but we do offer no-splicing direct plug-in 7-way 5th wheel harness kits like # PK11893-11932 that fits the Ram with factory 7-way. We also offer just a 7-way/4-pole socket, part # HM40975 that connects to a round U.S. Car connector. If your truck has neither a factory 7-way nor a 4-pole you can instead use 4-pole kit # C59496 and then add our # ETBC7 7-way kit. Together these two...
view full answer... - Do I Need to Run the 12v Power Wire to the Battery When Installing the C59496I do strongly recommend running a separate power wire from the # C59496 directly to the vehicle battery. A wiring harness must have its own dedicated circuit directly to the battery since the 12 volt accessory circuit was not designed to support the additional load of a trailer wiring harness. We have seen many instances where customers have tapped into a 12 volt accessory circuit, like a 12v power supply at the rear of the vehicle, and the harness failed. We have also seen instances where...
view full answer... - Trailer Hitch Fit for 2000 Pontiac BonnevilleThe Curt # C13900 multi-fit hitch is a fit for full sized trucks and SUV's as well as some compact trucks and vans, and therefore wouldn't be a good fit for your 2000 Pontiac Bonneville. I'd recommend going with a custom fit hitch like part # C12044 which is a fit for all 2000 Pontiac Bonneville models except for the SLE. If you have a SLE model, use the Draw-Tite # 36309 hitch. If you'll be using the hitch for light duty towing, you'll also need a ball mount like # 36063. For a trailer...
view full answer... - Recommended Trailer Hitch and Trailer Wiring Harness for 2004 Subaru Impreza WRXThe Curt # C11497 Class I hitch you looked at would be a great choice for your 2004 Impreza WRX. It has the same weight ratings as the Draw-Tite and Hidden Hitch and would install in the same manner. Don't let the reasonable price fool you, Curt makes a great product so you wouldn't sacrifice anything by going with the least expensive option. If you'll be towing with the hitch, you'll also need the following items: Trailer wiring harness, part # C59496 Ball mount, part # C45022 1-7/8...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Jonathan Y
Video by:
Dustin K
Video by:
Chris R
Video by:
Thomas T
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Noah M
Updated by:
Sabrina W
Written by:
Amanda M
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Matthew
5/7/2023
Its been on a year now and I love the ability to pull a 4x8 trailer with my xc70.