Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The 5-wire design of this kit is perfect for newer boat trailers with hydraulic brakes. Easy-pull connector housings make disconnecting a snap. They include built-in mounting holes and protective dust covers on both the vehicle and trailer plug.
Features:
Specs:
The 5-way flat connector is found on most newer boat trailers that have hydraulic brakes. The fifth wire in this model ties into the reverse lights on your vehicle so that a signal can be sent to your hydraulic brake actuator to disengage whenever the tow vehicle is put into reverse. To use this function, your actuator must have an electric reverse lockout with solenoid.
The 5-way design will also work with small utility trailers that have electric brakes. For this type of application, the fifth wire will need to be wired to correspond with your in-cab, electric brake controller.
California residents: click here
i like this 5 pin flat plug with covers.
Shiiped quickly product was just as described.
Ordering was easy and fast liked item and reordered a spare because it was a quality item and priced right!!!!
Excellent co to deal with. They even called me to make sure I wanted another item of the same type!!!!!!
highly recommed this CO!!!!!!!!!!!!!!!
PLACED AND RECEIVED MY ORDER IN A TIMELY MANNER WITH COMPLETET SHIPPING INFORMATION. I WOULD GREATELY RECOMEND THIS CO FOR FUTURE ORDERS.
GREAT SERVICE!!!!!!!!!!!!!!!
Have not had opportunity to put products to use yet. Products look like they should do the intended job well. Etrailer.com does have really fair pricing and shipping time is outstanding! Received complete order within 3 days of placing order. Will definitely use again.
etrailer is the only place I could find this item. It is much higher quality than other flat connectors, with weather covers and big finger/thumb grips to actually hold onto the connectors and easily separate them. I used the 'trailer' end in my adapter unit.
The female connector is attached to the swing arm of a motorcycle to provide lighting lighting for a trailer pulled by the motorcycle. This means that there is likely much more movement in the harness than for an automotive application. I've never had a problem with any part of the harness. I found this product to be exactly what I wanted, well made and easy to install. The protective cap functions well as it remains pliable (flexible) after a year of use, and while it has never fallen off in use, it is easy enough to remove before making the connection. It has done the perfect job of keeping mud and other detritus out of the contacts. The recessed nut holders also function well and is one of the reasons I chose this wiring kit. This wiring kit gets high regard and recommendation from me. All of my purchases from etrailer have been solid products delivered at reasonable cost.
The quality of this connector is great. I installed ea one end to the hitch platform on the motorcycle and bolted it down then did the same on the trailer. I used the old connectors to make a jumper between them. Works great and I don’t have to worry about wires getting damaged. Love it
Warren 
8/18/2020
Still working great
Amazing service
Marcos
6/6/2024
Great
With the help of Crystal I ordered this connector and a matching wiring harness for my motorcycle and trailer. I was unsure if these were the correct parts, but Crystal was able to locate the exact ones and ship them the same day.
I was very pleased with the fast service and knowledgeable staff. Even with standard shipping, my order arrived 4 days sooner than was projected.
To say I'm happy with etrailer is an understatement. They are great.
Replaced a round connector that was unreliable and would loose connection over the road. This flat 5 pin makes 100% connection every time and stays connected. The boot is also weather tite when connected or not so there's no corrosion. Great product.
Product was as described and fast shipping, great service!
I'm hoping to do much more business with etrailer! Thank you
Order was shipped promptly and the product was of great quality.
Don S.
5/27/2017
Product is working just fine
One year after installing the conversion of drum to disk brakes on my single axle EZ Loader boat trailer, the brakes continue to work perfectly. I've had no reason to seek assistance on service or warranty.
Worked perfect....the mounting was great and placed the wiring neat and clean by the hitch on my Street Rod ...........I have you bookmarked for future purchases.
All in all good service and fair price.
Forgot to let me know they were out of 1 of the things I ordered.
But did get to me fast after that .
Life's to short to as it is Don't worry.
Thank you.
THEY KNOW WHAT YOU NEED AND WHAT YOU WANT. SHIPPING IS FAST !!!!
Much better quality and more heavy duty than other plugs I have used. Should last a long time
The Hopkins Endurance 5-way flat trailer wiring Kit PN HM47890 and wiring clips PN 464600 arrived ahead of the time scheduled and are of a higher quality than we expected. Thanks a million!
Delivered very fast. Top quality mercha ndise.
Excellent service and product was just what I needed,Thx again.
Great product quality. Very well made. Buy with confidence.
Excellent shipping time & speed. All that I ordered was in stock.
Thank you
Great product, great videos
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob S.
2/7/2018
It works, still. Does the job I need it to do. Not much more to say. In general, I tend to like the stuff that Hopkins makes.