Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236
Retail:$120.95
Our Price: $78.54
You Save: 35%
Confirmed to Fit
1993 Honda Accord
Sedan
Wagon
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (952)
- Q & A (0)
- Photos
1993 Honda Accord - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- Converter
- CURT
Install a 4-way flat on your Honda Accord with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems
- Connects directly to your battery to avoid overloading your vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Resists water and vibration thanks to potted enclosure
- Connects directly to your vehicle's wiring with the included quick-splice connectors
- Color-coded wires and wiring guide ease installation
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- Limited 1-year warranty
Installation
To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your vehicle near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your vehicle using the included cable ties.
It is recommended that you use a small amount of grease on the 4-pole connector to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring. If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring. Note: This will not affect how the tail lights on your vehicle operate.
This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness
Replaces 59200
Compare to Tekonsha TK47FR
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector - C59236
Average Customer Rating: 4.7 out of 5 stars (952 Customer Reviews)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.by: Steve05/08/2023
So, video left out removal of plastic trays behind each wheel well. A small torx is required.
Per video my wiring on left side is correct Red to the Yellow/Black, Yellow to the Blue/Green. Test tool (as seen in video) shows nothing when brake pedal pushed; brake indicators on tester both light up when running lights are on, but the running lights indicator does not light up.
Blinker indicators on tester are correct.
Have done the training cycle 6 times, slowly.
Steve B.
5/23/2023
Hi. Turns out the video for the 2013 x3 is correct, for my 2017. Brake and tail lights on separate wires.
by: Vic Smith02/18/2024
2021 Ford Mustang Mach-E
For my application, a 2021 Mach-e, this required cutting and splicing into the LED tail lights. I went back to the interweb and ordered one that was plug and play and did not require splicing. Yes, there is a video where a guy identifies exactly how to install this particular kit on the Mach-e, but it was just a bridge too far for me. The plug and play wiring works great and was easier to install. The plug and play wiring took about 80% of the installation time, the hitch itself took about 20% of the install time.
Katrina D.
2/27/2024
I am sorry that this harness was a bit more complicated than what was expected to get installed. I would go with the plug and play all day. Unfortunately, the only harness we have for your 2021 Mach-E that is a plug and play option is part # TK24VR, which is currently on extended back order. This means, that we are waiting, but do not have a date that our shipment will be in, so we took the part off of the site for now.
by: Michael 04/26/2024
Buick
I have a small convertible Buick. Almost no one would put a trailer behind this car. But I use it to pull my jet ski. It was great to have this connector. It works perfectly.
by: Mark 05/10/2024
Kia
Installed easily. Kia should have a plug in option so that you don't have to run wiring all the way to the battery. But installed fine, well detailed by etrailer.
by: Chris03/22/2024
Terrible job packing hitch. See pics. Hitch has deep scratches through paint. Won't purchase from trailer again.
by: Allen03/06/2024
2022 Kia Soul
I'm sure the wiring is fine. However, I bought from etrailer because the product support was supposed to be great. We can't figure out which wires to attach to. Yes, I've read instructions. Yes, I've used a multimeter and test light. Yes, I've posted in forums. Yes, I've spent hours looking online. No dice. I even had an electrician give it a go to determine what to splice. I'm injured so can't walk, making some direct instructions on which wires to splice more important at this time. I can't keep removing the lights, etc. and reinstalling them when I can't ID the correct wires. I told them this on the phone when I ordered. They seemed supportive. When I repeatedly asked for which wires to splice the response was something akin to, "We don't know. Figure it out."
Two thumbs down. Received great support from a different online supplier.
by: Jerry K03/16/2024
This works great and people can see the brakes turn signals and tail lights when we have the bikes on the back of the car. We put this on so we could plug a portable lighting system in for our bike rack.
by: Daniel 05/14/2024
The product works great but the instructions were a little hard to follow for a newbie. I did eventually get it going but I needed to consult my mechanic (YouTube) to get it all figured out.
by: Robert 04/24/2024
Your installation video was great. I don't think I could have found the correct wires without it. The Curt instructions were not clear in determining which wiring scheme the Pacific has. I still don't know what PS stands for in their chart, but your video explained it nicely.
by: Gale 05/10/2024
I had this wiring harness professionally installed. Works as it should.
by: Cynthia02/29/2024
2018 Volvo XC60
My son said this is the part I needed so I guess it's good but my son, the mechanic said it's not what I needed. I guess it was too much so need to return.
Katrina D.
3/7/2024
Sure! I've got your information sent over to customer service to get the return processed. Yeah, that is the only confirmed universal option that we have for your 2018 Volvo XC60, I wish it was a bit less expensive and that there was an easy plug and play option for your vehicle. Some mechanics do carry some OEM parts for trailer wiring for vehicles; maybe see if your son is able to help you find an OEM harness. It may be a bit expensive, but you could always reach out to a Volvo Dealership to get an OEM harness.
by: Scott 05/20/2024
Overall easy to install. Takes a few hours. The instructions could use updating. Vehicle years and trims (bulbs vs led) had wire colors that didn’t match any instructions or videos.
by: Dave N10/29/2023
2024 Kia Telluride
The wiring harness doesn't quite work as advertised. I followed the provided instructions. Now when I turn on the left turn signal on my 2024 Kia Telluride, the left side trailer running lights also flash with the turn signal. The right side turn signal works correctly. Harness installation was a huge PITA. I blame Kia for not having a plug and play like my 2022 Santa Fe had. I had to remove both tail lights, splice into the factory wiring then run a power wire from the rear to the car's battery in the front. Again, a huge PITA but that's Kia's fault, not etrailer. Except for those things, I would've given more stars.
Jenny N.
11/2/2023
Yes, I would say powered hardwire harnesses are a tough install. I want to help do little trouble shooting with you. Can you check the area where you grounded the wire to make sure that it is to bare metal. If it is a clean, metal location already, disconnect the ground wire and attach it to a long piece of wire. Run this wire to the vehicle's negative battery terminal for testing purposes. If this solves the issue, the ground wire can be permanently run to the negative battery terminal or moved to a new location. I am hoping that this will stop the left turn signal from flashing on the trailer.
by: Paul 04/29/2024
Honda Element
Worked as advertised. Used on a Honda Element. I would recommend to others.
by: Mark N02/04/2024
What a great experience. The wiring harness kit was easy to install, and the people at etrailer were courteous and happy to answer my questions. They got right back to me and saved me lots of time. It’s very rare to get service like that anymore.
BTW, the unit works very well.
Thanks etrailer.
by: Bill04/28/2024
Fantastic and great video by on how to B install
by: John 03/10/2024
It’s a great product. We pull the small trailer from California to Missouri. No problems at all just like factory.
by: Mike 01/22/2024
Mercury
I received the Trailer hitch, and I was able to put on my 2011 Mercury
Marqui all by myself with the assistance of three jacks. I completed
the job in my garage at home. I did watch the videos on u-tube about
6X. I am very happy with the trailer hitch.
by: Philip 03/19/2024
2019 Ford Ecosport
A little tricky to install, but the videos they provide do a great job of explaining what needs to happen. (2019 Ford EcoSport.) The wire clips are a little finicky... had issue with one side, but managed to get it working.
by: Robert04/27/2023
2023 Hyundai Palisade
2023 Hyundai Palisades are unique. Your website indicates that this item works for the 2023 Palisade, but according to a lady in your office, it only addresses the lights on the trailer, but does not disconnect the automatic braking system built into the Palisade in the event of a rear end collision that applies the brakes when it senses an obstacle (read boat trailer). Very frustrating!
Jenny N.
4/28/2023
I have a fix for you. All you need to do is turn off that feature in the vehicle while towing. I have a Hyundai and you will just need to play around in the vehicle menu system to find it and turn it off. I recommend reading up in your manual the section on towing. There may be other features you have that you will want to disable.
by: Thomas 05/01/2024
Works great when installed correctly according to the instructions.
by: Alexander 02/14/2024
Kia
If you need something trailer/towing related, e trailer has always been great for me. This product worked great for my 2024 Kia telluride xline trim.
by: Stephen08/26/2023
Once I understood I had a 2 wire system in my 2022 BMW X3 the installation went well. The green wire for the right tail light is too short and I had to splice on an additional 2' of wire.
by: Michael 03/25/2024
Works as it should. The video made it easy to install. Didn't come with quiet enough hardware to install but that wasn't a big deal though.
by: Allan04/10/2024
Ordered wrong part. They graciously handled the mess I created and sent out the right parts I needed right away.
25
952
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Parts Needed For Towing A Small Camper With a 2018 Hyundai AccentTo begin according to the owners manual for your 2018 Hyundai Accent it recommends against using your vehicle for trailer towing. That being said here are the parts if you decide that you are going to use it for towing your camper. For your Accent the Curt Trailer Hitch Receiver # C11548 has a class I rating that is capable of 200lbs tongue weight and a towing capacity of 2,000lbs. You will need a wiring harness for the lights on your camper. The Curt Powered Tail Light Converter # C59236...
view full answer... - Trailer Hitch Compatibility With A 2022 Toyota Sienna Yes, the Curt Trailer Hitch Receiver # C22UR does fit your 2022 Toyota Sienna. This hitch has a maximum GTW of 3,500-lbs, and a maximum TW of 500-lbs. If you need the complete towing setup, you're also going to need a ball mount # D-28, and trailer hitch wiring # C59236. You'll want to measure your rise/drop first before committing to a ball mount.
view full answer... - Recommended Trailer Wiring Harness for 2011 Mitsubishi Outlander SportThe Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56127 is a confirmed fit for your 2011 Mitsubishi Outlander Sport as long as you have LED taillights. We do not have an installation video, however I can walk you through the installation. This custom-fit T-connector plugs into your Mitsubishi Outlander Sport's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to...
view full answer... - Purpose of Red Wire on Curt 59146 Wiring HarnessAlthough we do not carry the Curt 59146 I can tell you that the red wire connects to the brake light wire on your 2014 Volkswagen Jetta. This is a 3 to 2 wire converter so it will combine the brake and turn signals to be compatible with the trailer wiring system. If you do not connect the red wire the stop signal will not be sent to the trailer lights.
view full answer... - Troubleshooting 4-Way Vehicle Wiring Harness Not Allowing Brake Lights to Work on 2003 Toyota TacomaThe 4-Way Harness # C55379 for your 2003 Toyota Tacoma is going to use the factory wiring to identify when a function is activated and power the trailer connector. Since you mentioned your truck was converted to LED lights if you factory lighting has a resistor installed going to the brake lights this may prevent enough power from getting to the tail lights. You may have to either move the resistor or go with a powered module like the # C59236. This has a separate power wire which runs...
view full answer... - Do You Have A Trailer Hitch Receiver or Wiring For Brake Controller 2020 Harley Davidson TriGlide? While we do not have a trailer hitch for your 2020 Harley Davidson TriGlide I can help you with all the wiring you will need. We only have universal wiring so you would first need a 4-Way # C59236 which you would then use the 6-Way Upgrade # ETBC6 since you are adding a Brake Controller # RED52VR. The 6-way round is generally the type of connector for motorcycle trailers using brakes as they do not require the reverse circuit wiring.
view full answer... - Recommended Hitch for a 2018 Audi Q7 and Installation Instructions I sure do! The instructions for the Curt Trailer Hitch item # C13277 detail in step 7 and 8 how to trim the bumper of your 2018 Audi Q7 and avoid the sensors for the lift gate. I have linked them below. If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.
view full answer... - What Trailer Hitch do You Recommend for My 2022 Hyundai Santa Cruz?Yes, we do carry that hitch on our site! That is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C23WR. This Curt hitch is confirmed to fit your 2022 Hyundai Santa Cruz and comes with all hardware required for a bolt-on installation.
view full answer... - How to Determine Wiring Type of 2019 VW Golf SportWagen to Install Curt Harness C59236Thanks for the purchase, and I have added a cut out from the instructions which detail how to determine the wiring type of your 2019 VW Golf SportWagen to install the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. While you can use a circuit tester like # PTW2992, the easiest thing to do is check the wiring description to see what your VW falls under. You'll need a helper to engage the lights, but that's the easiest way - just check your lights functions...
view full answer...
- Recommended Hitch and Wiring Harness for a 2023 Honda CR-V Hybrid Touring Yes, you are correct. The Curt Trailer Hitch item # C13397 is the correct hitch for the 2023 Honda CR-V Hybrid. The wiring harness is going to depend on whether or not your CR-V is front wheel drive or all wheel drive. I have listed both options below. One is custom fit and the other requires splicing. Front Wheel Drive - Curt Powered Tail Light Converter item # C59236 All Wheel Drive - Curt T-Connector Vehicle Wiring Harness item # C56370 You may lose some of the range on the Hands...
view full answer... - 7-Way for 2004 Ford F-150 without Factory 7-WayThe Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector # 118247 will only fit your 2004 Ford F-150 if it has a factory 4-way currently. If you are totally without trailer wiring it would not work. I attached an install video for this kit for you to check out as well. You'd need to first go with a universal 4-way instead like part # C59236 and then convert that to a 7-way with # 37185.
view full answer... - Hitch With A mounting Bracket For A 7 Pole Plug For A 2003 Chevrolet TahoeFor your 2003 Chevrolet Tahoe I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e26KR. If your vehicle has factory wiring, I recommend the Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors Item # 30955 which come with the four and 7 pole plug as well as the bracket. If you do not have a factory 7 pole plug, I recommend the Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit Item # C59236. If your...
view full answer... - Hitch, Wiring Harness, and Brake Controller Recommendation for 2007 BMW X3When it comes to a hitch for your 2007 BMW X3, I recommend going with the Curt Trailer Hitch Receiver, # 13573. This hitch will provide you with a 2 inch receiver opening, 350 lb tongue weight and 3,500 lb towing capacity, and is our most economical hitch option for your X3. I have attached a video of this hitch being installed on a 2009 X3 for you. I'm assuming that your X3 isn't currently equipped with any trailer wiring so you will want to start out by installing the Curt Powered Tail...
view full answer...
- Recommended Trailer Hitch And Trailer Wiring For 2007 Honda Accord CoupeI did some research on your 2007 Accord Coupe and according to the owner's manual, you are limited to a 1,000-lb towing weight capacity. That is the combined weight of the trailer and any cargo loaded on the trailer. This information is on page 213 of the owner's manual. It also stated that the maximum tongue weight is 100-lbs. I am afraid carrying 2 motorcycles that weigh 400-lbs on a trailer that weighs 310-lbs would exceed the towing capacity of your Accord. If you find you can eliminate...
view full answer... - Does Wiring Harness Installation in 2014 Volkswagen Jetta Sportwagon Void Vehicle WarrantyVehicle warranties fall under the authority of a federal law called the Magnusson-Moss Warranty Act. The act states, in part, that your warranty must still be honored unless the part installed actually caused the malfunction. The Curt wiring harness # C59236 that you referenced is a powered trailer taillight harness, just like the # C59496 which is the harness recommended for your 2014 Volkswagen Jetta SportWagen. Both of these are hardwired installations that require cutting and splicing...
view full answer... - Best Trailer Hitch Recommendation for a 2000 BMW 328iWe do have trailer hitch that will fit your 2000 BMW 328i but # 24857 will not fit. If yours is a coupe, sedan, or wagon, excluding M series and convertibles, you can use # C11174. If you plan on doing any towing the correct ball mount for either hitch is # C45510. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you can use # C59236. If you will be using the hitch for a bike rack or cargo carrier make sure that it is compatible with a Class I trailer...
view full answer... - Wiring Harness for 2007 Volkswagen PassatWe have two choices for wiring harnesses your 2007 Volkswagen Passat Wagon. We have the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 or the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. These are both universal harnesses, we do not offer a custom-fit harness at this time. The # C59236 is a splice-in harness, and the # 119250KIT will install without cutting or splicing into your wiring. I...
view full answer... - Trailer Hitch Recommendation for 2017 BMW 320i SedanFor a hitch for your 2017 BMW 320i the Curt hitch part # C11367 is what I recommend because it would do a great job towing a small trailer as it has a 2,000 lb trailer weight capacity and also has a concealed crosstube which makes it less visible than other options. For trailer wiring the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 is the recommended fit. For a hitch ball you'd want the part # 3593 which is what Draw Tite recommends with this hitch. For...
view full answer... - Installation of Curt Wiring Harness on 2022 Hyundai TucsonYou can expect the installation of the # C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.
view full answer... - 2024 Hyundai Santa Cruz 7-Way Wiring and Brake Controller RecommendationsChoosing the correct wiring and brake controller can be a bit intimidating, but I have the perfect solution for you to tow your new trailer safely with your 2024 Hyundai Santa Cruz by using the following parts: - Curt 4-Way Wiring # C59236 (if you don't already have a 4-Way) - Universal Installation Kit # ETBC7 - No-Drill Bracket # C57202 - Redarc Tow-Pro Liberty Brake Controller # RED24FR - Wiring Harness for Controller # RED69FR The Curt 4-Way pulls power for your trailer lights...
view full answer... - How to Determine Correct Curt 4-Way Wiring Harness For 2024 Kia TellurideYeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride doesn't matter, and you can just go ahead and use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. But this is the most challenging install, and something I personally don't recommend; it's just making things harder...
view full answer... - Trailer Wiring Harness Recommendation for a 1999 Isuzu NPRWhat you need for your Isuzu NPR truck is a powered converter # C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the vehicle battery to power the trailer lights. I have included a link to an FAQ article that offers tips on routing the power wire.
view full answer...
- Trailer Wiring for 2017 GMC Acadia to Add 7-WayThe factory trailering package on the 2017 GMC Acadia means you would have a 7-way plug already. Like all '17 Acadias this vehicle does have the wiring although I'm not entirely sure what you mean by plugging trailer lights directly into those connectors because trailer lights do not plug in. I assume you are looking to add a brake controller so what you will need to do first is add a 4-way, the T-One Vehicle Wiring Harness # 118720 which does plug in behind your rear bumper. You will...
view full answer... - How To Carry 300lbs Of Cargo With Trailer Hitch Receiver On 2015 Mini CooperI may have another option for you, but there is not a 2" trailer hitch receiver made for your 2015 Mini Cooper at this time. Since you do not have an S or John Cooper Works Model the hitch with the highest tongue weight rating is the Curt Trailer Hitch Receiver # C11417 which has a 200lb tongue weight rating and 2000lb trailer weight rating. If you have a spare tire located under your vehicle you will need to remove it to install the # C11417. To be able to carry 300lbs with your Mini...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
5/16/2023
You will need to double check and make sure that your ground wire is attached to a clean metal surface. If you are grounded properly, and still have no lights, then you will want to test the converter box itself. If you are receiving power to the box and nothing out of the box, then it is possible that you have a defective box.