We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Part Number: C56274

123 Reviews | 28 Questions

In Stock

$106.09

Retail:$175.95

You Save: $69.86

Not Confirmed to Fit

2016 Ford Transit T150

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt custom fit vehicle wiring end connector plug-in c56274

curt custom fit vehicle wiring trailer hitch plug-in t-connector harness with 4-pole flat connector

curt custom fit vehicle wiring trailer hitch 4 flat c56274

curt custom fit vehicle wiring 4 flat plug-in c56274

curt custom fit vehicle wiring trailer hitch end connector t-connector harness with 4-pole flat

curt custom fit vehicle wiring trailer hitch end connector

curt custom fit vehicle wiring trailer hitch 4 flat t-connector harness with 4-pole connector

Show All (8) Product Images

Show Fewer Product Images

In Use/Installed

2015 jeep renegade custom fit vehicle wiring curt trailer hitch 4 flat t-connector harness with 4-pole connector

2015 jeep renegade custom fit vehicle wiring curt trailer hitch 4 flat c56274

Show All (2) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector customer photo

Show All (12) Customer Images

Show Fewer Customer Images

Videos

Curt T-Connector Vehicle Wiring Harness Installation - 2022 Jeep Renegade

Curt T-Connector Vehicle Wiring Harness Installation - 2020 Jeep Renegade

Curt T-Connector Vehicle Wiring Harness Installation - 2017 Jeep Renegade

Trailer Wiring Harness Installation - 2015 Jeep Renegade C56274

Curt T-Connector Vehicle Wiring Harness Installation - 2016 Jeep Renegade

Curt T-Connector Vehicle Wiring Harness Installation - 2019 Jeep Renegade

Show All (7) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance. 1-800-940-8924 to order CURT custom fit vehicle wiring part number C56274 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.

All Info
Reviews (123)
Q & A (0)
Related Parts
Photos

CURT Custom Fit Vehicle Wiring - C56274

Highlights

Custom Fit for Your Vehicle: Works with your vehicle's wiring
Plug-and-Play Install: T-connectors plug inline with tail lights—no cutting or splicing.
Protects Vehicle Wiring: Powered converter draws power directly from battery to prevent overload.
Ready for Trailer Lights: 4-pole flat connector powers stop, turn, and tail signals on your trailer.
LED-Compatible Output: Works properly with factory LED lighting for reliable trailer light function.
Clean, Factory Look: Hidden plug and lead design keeps wiring tucked away and out of sight.

Features to know about

Installs Without Cutting or Splicing: Plug-In T-Connector Design

Wiring up for towing doesn’t have to mean cutting into factory wires. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector plugs directly into existing tail light connectors for a clean, factory-style hookup. The plug-in design keeps the job simple and avoids tampering with delicate vehicle wiring.

Comparison image of Curt T-Connector vehicle wiring harnesses showing 4-pole flat trailer connectors and plug-in configurations for trailer light wiring systems.

Protects Vehicle Electronics: Powered Converter Harness

This harness includes a powered converter that draws power directly from the battery instead of the vehicle’s lighting circuits. That setup protects sensitive electronics from overloads and prevents damage in the event of a trailer short. Running the dedicated power wire ensures safe and consistent lighting operation, even with LED-equipped trailers.

Reliable Lighting Connection: Standard 4-Flat Output

The 4-flat connector covers the essentials—running lights, turn signals, and brake lights—for small to midsize trailer setups. The connector is easy to plug in and gives you a dependable link between your vehicle and trailer lighting every time you tow.

Quick Troubleshooting and Dependable Performance: Clear Signal Paths

If you ever need to check function, each wire path can be easily tested from the 4-flat plug or converter box. A solid ground connection and proper clicks on each tail light plug ensure consistent signals through every circuit. That means fewer wiring headaches and reliable lights trip after trip.

Specs

Electrical Specifications

Maximum amperage:
- Stop/turn lights: 3 amps per circuit
- Tail lights: 6 amps per circuit
Limited 1-year warranty

56274 Curt T-Connector - Surface Mount Technology - 4 Wire

Similar to Tekonsha 118651

Installation Details C56274 Installation instructions

This Product Fits The Following Vehicles

2015 - 2023 Jeep Renegade
2015 - 2023 Jeep Renegade without factory trailer connector

Customer Satisfaction Score:

95% were satisfied with this product

5% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Defective

5% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Defective

4.7

123 reviews

5 Stars		(101)
4 Stars		(15)
3 Stars		(2)
2 Stars		(4)
1 Star		(1)

by: David 06/24/2026

2023 Jeep Renegade

etrailer and Curt harnesses are fantastic. Works great on my 2023 Renegade Limited with factory LED lights (22D Package). I connected power from the Driver side rear fuse box instead of running to battery and leave 4 wire trailer connection in spare compartment. Used an add a fuse on slot F49.

Click to Enlarge

by: Martin J 08/01/2026 One Year Later

It has been about a year since I installed this trailer wiring harness on my Jeep Renegade and I have had no problems at all.

by: Jake B. 04/19/2026

Works great! The second time...

Ordered the kit, read all the directions thru, twice, before doing ANYTHING.

Wired it all up, didn't get trailer lights. Re-read directions to see if I missed anything. Checked to see that I was getting good ground. That checked out. Even watched the video, and just to be 100% sure I did everything as recommended, I put the moved the ground wire to exactly where the guy in the video put it. That made zero difference, as I was still getting just as good of a ground as before when I checked for continuity from the trailer pigtail all the way to the left rear speaker bracket. Still no lights.

Emailed customer service, and they sent me a new kit and a return label so I didn't have to pay to ship the bad box back.

Replaced the suspected faulty box with the new box from the replacement kit, everything works perfectly from the get-go on the 2nd box.

So, to clarify, the product itself, *** (that's 3/5 stars).
But the customer service, ***** 5/5 stars.

by: Jack D. 06/17/2018

2018 Jeep Renegade

I just completed installation of the Curt Trailer Light Wiring Kit C-56274 on our 2018 Jeep Renegade TrailHawk.
The kit is very well thought out, and relatively easy to install.
The written instructions appear to be for an older model than mine.

On my 2018, it was NOT necessary to remove the complete side panels.
All work can be completed just by removing the spare tire, tool kit, and the foam package tray, (Photo#1&2) then unbolting the rear trim panel (3) Phillips Head screws in the wheel well, and (2) bolts holding the Tie-down brackets, that require a #40 Torx bit. (Photo#3)
Then remove the snap-out grilles in each side, (Photo#4&5) and you can access everything. You may have to use a fish-wire to pull the wires up to the lights.

Route the “Tee” connector and the respective wires up into the Taillight area, unplug the harness connector and install the “T”. (Single Green wire goes to the right side, all others up into the left side. Secure the power module and secure the wiring to the rear surface of the wheel well however you prefer. (I used “Duck” tape.)

Re-install the rear trim piece. This will require working the rubber door seal up over the lip of the panel, using a molding tool, screwdriver, and /or fingers (Photo #11&12.) Install the (3) screws & the (2) Torx bolts and tie-down brackets.

Coil the wire with the trailer plug in the wheel well adjacent to the spare tire, & extend it to your trailer under the door lip when you need it.

I would like to add a comment on the great service and fast shipment I’ve received from E-Trailer over the years. They are my “Go-To” people for trailer & towing needs.

Thanks very much,
Jack Dancoe

Click to Enlarge

Jack D. One Year Later

7/2/2019

Just great!

by: Howard 03/22/2026

Toyota RAV4

A good plug and play connector. Kit did not provide double face tape to mount the module. I was able to run the lightning wires without removing the side panels which saved breaking plastic clips. Rather than running a 12v line to the battery in the front of the Renegade, I found a power source in the rear and used that. I've successfully done this before when wiring up a Rav4. You may or may not have that 12v source if you do not have the power roof.

by: Robert 07/29/2026

Had installed all was great

by: Elizabeth 05/27/2021

Fast shipping

Click to Enlarge

by: Jeremy 09/16/2025

Went on exactly like the video showed. Works perfect. This is why I always buy from etrailer.

by: Dan. D 06/21/2017

I was actually able to "fish " harness to each side. I used a electrical wire fish tape , going from the bottom to the open access panel area , hooking , in my case a 16-2 speaker wire, pulling it to bottom. Attaching the harness to speaker wire and pulling back up. It sounds like double work, but much less then pulling upper and lower panels on both sides. For the hot lead to front I was able to slip it under the plastic cover used for the brake lines for much of the distance to the front.

Dan. D. One Year Later

6/21/2018

Great, no problems with hitch or wiring.

by: Joseph Bauman 12/08/2019 One Year Later

First time install like this and the video was spot on, and easy to follow. My hands had a slight problem fitting inside the rear side panel. The over all length was plenty, I fed it through my hitch and still had some which got zip-tied and back fed. Used multiple times, been in water and much more and never had an issue.

Joseph B. One Year Later

12/9/2020

Everything has been great absolutely no issues!

by: David 07/22/2025 One Year Later

Good instructions. Not too hard to install yourself.

by: Nicolaus 05/01/2021

2020 Jeep Renegade

This product mounted properly and works as intended. I'm taking away a star for the awful instructions given with the product. Black and white, low resolution photos and poorly written, the instructions do not make it an easy install.

HOWEVER, etrailer's included video completely saved this install. The video was high quality, easy to follow and showed everything necessary. Only thing I had to do that wasn't brought up in the video was to acquire a rubber grommet for the power wire feed and thats only because I own a Trailhawk. The other Renegade models have a more difficult install for the hitch kit because of mounting hardware but provides a rubber grommet from one of the holes used to mount the hitch kit (etrailer's video walked us through this). The trailhawk has hardware already installed where the rubber grommet would be and so I had to grab one at my local auto parts shop.

by: Christina 07/21/2023

I am not a mechanic. I own and use lots of tools but for this stuff I am a beginner and installing this was difficult and frustrating for me. The part that really sucks is getting the wire to the battery. I really wish they included the fishing tube they used in the demo video. I even bought airline tube but the kind I got isn’t stiff enough so I don’t know what exact type they had.

I ended up having to do a very bootleg way of running the wire to the battery because I could not get the battery wire through the grommet hole thing, so it goes from my trunk down on the floor and out my driver door to under the hood. I needed to move a camper in a hurry so this was the best I could do so I was road legal.

Obviously this is a dumb way to have this installed long term so I bought some shrink wrap connectors and am going to try and do this properly if I can find something to get the battery wire through the grommet (I think thats what it’s called?). If I could figure out a way to go from my dash to under the hood, I would just keep the wiring inside, but googling how to do this wasn’t as clear cut for me since the instructions assume more base knowledge than I have.

by: Mark 05/30/2023

This was described as a direct bolt on hitch. It was not. Drilling was required on my 2017 Latitude. The directions were not correct on the removal of the necessary trim to install the hitch. The overall design of the hitch is excellent and does remain hidden as described. My recommendation is prior to beginning the installation, research the trim removal steps and have trim replacement clips in hand before beginning. The wire harness kit was easy to install but recommend having extra wire ties to ensure the power wire is well secured.

by: John 01/31/2020

Purchased this product for a 2016 Jeep Renegade Latitude. Installation was pretty straightforward except for two items:

The video (watch it since the enclosed instructions are generic) suggests that you can run the hot wire from the battery through an existing grommet at the bottom of the left rear inner fender. I found this not to be practical since the grommet is sealed around existing wiring as it exits the inner fender. I found it necessary to drill a small hole in the bottom of the inner fender, put a grommet in place , and run the wire through it.

Also, the video suggests that when the installation is complete, the lead for the trailer connector can be bundled up and kept in the inner fender area, to be accessed through the removable plastic grate and run through the cargo compartment when you need to use it. I don't think this is the best idea since there is a fuse box in that inner fender which may get damaged if you are going in and out of there. I will likely buy an extension for the trailer lead and run it into the spare tire area to leave it there.

by: Steve 05/12/2022

2017 Jeep Renegade

I am pleased with the Curt T-connector harness. It was quite plug and play. The only unexpected issue I had was running the wire through the rear driver's side taillight access. There was no hole so I had to drill and grommet a new hole to get to the chassis area. After that I picked up wire wrap from a local retailer to further protect the wire running underneath. All in all, great service and product from etrailer!

by: Beau 09/30/2025 One Year Later

Easy to install. Works well. Easy to stow away when not needed.

by: JeepLife 05/25/2017

2016 Jeep Renegade

This is an exellent product and fairly easy to install. My advice is to skip the undercarriage approach to running the wire to the battery and run it inside the cab. It was very easy to tuck the wire under the plastic trim along the left side of the vehicle and up under the dash, completely invisible and, for the most part, no wear points. The work under the dash is a bit of a challenge. On the Jeep Renegade 2016 there is a gasket around a bundle of wires about 6" below dash level on the driver side of the firewall. I was unable to add the wire to the bundle but it was easy to make a small puncture in the gasket and run the wire next to the bundle and through the firewall.
Total time was about 1 hour, even with the delay in figuring out how to deal with the firewall. Very easy and clean installation and everything you need is in the kit.

by: Ryan 08/07/2021

I purchased the trailer wiring harness for a 2020 Jeep Renegade on a Monday afternoon. I chose standard shipping for about $4. It arrived on Friday, three days earlier than the "expected" delivery date.

I've never done any electrical work on a vehicle before, but I'm fairly mechanically inclined, and I watched a couple of the instructional videos. The entire install took me about 2 hours. I was working alone. Routing the power cable up to the battery by myself took more time than it would have with an extra set of hands.

One of the previous reviews for a 2018 Renegade install mentioned not having to remove or loosen any of the side panels. I went that route, and it worked just fine. I only removed the carpeted floor panel, the two foam pieces, the spare tire, and the rear-center plastic panel. I was able to use a wire to fish the cables from the bottom of the side panels up through the removable access grates in the side panels.

All the connections snapped together perfectly. Because I didn't loosen the side panels, I was not able to stick the black power unit to the sheet metal behind the side panels as described in the written instructions and the videos. Instead, I stuck the power unit to the sheet metal at the back below where the rear plastic panel would eventually be reinstalled (between the spare tire and the rear of the compartment). There was just enough cable to get from the power unit, under the side panel, and up to the driver's side taillight area.

Everything was included and went smoothly.

by: Meghan 12/30/2017

Great product and instructional videos. My husband had it all installed in just a couple hours. Looks great too!

Click to Enlarge

by: Daniel 07/04/2025 One Year Later

The light harness assembly kit was extremely easy to do I ran the power cord through inside under the trim though the driver side door into the engine bay to the battery instead of under the car but I've always done that with my amps but everything worked all lights turn signals and the trailer lights worked haven't blown a light or fuse yet I'm going on about year installed now highly recommend

by: Les 06/14/2021

It's a really good thing I had the Jeep on the lift in order to run the wiring from the battery to the rear driver side compartment. Finding a reasonable place to insert the wiring into that compartment was difficult and it would have been good if the instructions could have included a good location. I had to run the power wire all the way back to inside the rear bumper in order to find a reasonable place to run the wire into the compartment where the connection needed to be made.

by: Alex F 04/11/2019

Really easy to install, takes about 40-60 minutes without a lift. Hardest part is running the power/supply wire under the car. Everything you need is included, but I would recommend electrical tape to secure your connections.

by: Brett 10/15/2018

2018 Trail Hawk. Pretty easy on the Trail Hawk - removable grills make accessing tail light connections a breeze. Ran "hot" wire under driver's side kick panels and up through the firewall. There was a gasket in place, so ran the wire through it. Well thought out product.

by: Tyler 04/14/2020

The instructions ask you to remove/loosen most of the rear quarter trim which isn’t necessary, all you have to do is remove the faux speaker grilles to access the taillight plugs. Easy installation and no problems with the harness out of the box.

123

true

Show More Reviews

See what our Experts say about this CURT Custom Fit Vehicle Wiring

Do you have a question about this Custom Fit Vehicle Wiring?

Will Curt Aux LED Light Strip Kit C53201 Trigger Warning Light On Dash Of 2017 Jeep Renegade ?
Hey Jeff, That shouldn't be an issue. If you have a powered 4-way harness like the Curt T-Connector # C56274, it uses a converter and draws power directly from the battery for the trailer lights, so the Jeep isn't relying on the resistance of the Curt Auxiliary LED Lights # C53201 to monitor the lighting circuits. Even if you have a different brand 4-way harness, I wouldn't expect the low draw of these LEDs to trigger a trailer light warning as long as the harness is functioning properly....
view full answer...
Do You Sell a Plug in 4-Way Connector for a 2018 Jeep Renegade?
Welcome back Howard! We do not have the Tekonsha pn 118651 but I do have a comparable alternative. The Curt item # C56274 you were looking at is also a custom fit 4-way connector for a 2018 Jeep Renegade. It's going to plug directly into the tail light wiring harness in the rear cargo area of your Jeep and provide you with a 4-way capable of controlling your trailer or accessories lighting functions. I've linked a couple of installation videos below to help you get the Curt item # C56274...
view full answer...
Recommended Hitch for a 2019 Jeep Renegade
It sure does Charles. The Curt Hitch item # C12142 does indeed fit your 2019 Jeep Renegade. It bolts on to your frame from underneath so you will not have to remove the rear bumper to get this hitch installed. I linked an installation video below along with the instructions so you can see how to get this hitch set up. I do want to point out that the Curt Hitch item # C12142 you were looking at, is only a class II hitch with a 1-1/4" receiver. This hitch has a 2,000 lbs towing capacity...
view full answer...
Best Trailer Hitch For 2024 Jeep Renegade And Installers Near Me
Hello Robert, thanks for reaching out. The EcoHitch Hidden Trailer Hitch Receiver # EH83VR is the correct fit for your 2023 Jeep Renegade. If you intend to tow a trailer, you will also need the Curt T-Connector # C56274. If your trailer has brakes, you will also need the # ETBC7 install kit, and a brake controller such as the Tekonsha P3 # 90195. We do have a few installers in your area. I suggest you check with TM Trailers in Pineville. They are our closest dealer to you and I believe...
view full answer...
Recommended Hitch for a 2023 Jeep Renegade
The best hitch for a 2023 Jeep Renegade is the etrailer Hitch item # e37AR. This hitch is custom fit and bolts to your Jeep with included hardware. This is our house brand hitch but it is manufactured by Curt and is identical to their item # C13269 hitch with the exception of price and paint finish. The etrailer Hitch item # e37AR is made in the USA. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight. I have attached a...
view full answer...
Troubleshooting Brake Light Staying on With Curt 4-Way Wiring on 2017 Jeep Renegade
Based on the problem you have described I recommend checking the ground connection on the # C56274. When one or more functions remains on like this that is typically the problem. You need to make sure that the ground wire is secure on a clean, bare metal surface. You could also try moving the ground wire to a different location. If that is not the case, then based on your testing I would go ahead and say it is the converter box. Depending on where it is from and when you received it I...
view full answer...
Recommended Hitch for a 2018 Jeep Renegade Trailhawk
I checked with our vendor and the EcoHitch Hidden Trailer Hitch item # EH83VR is confirmed to fit your 2018 Jeep Renegade Trailhawk. This hitch is custom fit and bolts directly to your Jeep with included hardware. Our website can be fun to navigate sometimes but I assure you this hitch is definitely available. I have linked an installation video below. If you are planning on towing you will also need a wiring harness item # C56274 and a ball mount kit item # C45534.
view full answer...
Troubleshooting 4-Pole Wiring Harness on 2016 Jeep Renegade
We offer two 4-pole wiring kits for your 2016 Jeep Renegade, Tekonsha # 118651 and Curt # C56274, both of which work on the Renegade version without any factory-installed trailer wiring. Both install in the same manner, by plugging in at your two taillight connectors and via a 12V power wire that runs from the battery to the converter box. The converter box takes in separate stop and turn signals and combines them onto one circuit/wire as required by trailers. In these harnesses the yellow...
view full answer...
Installation Video for Curt C56274 Trailer Wiring Harness on 2020 Jeep Renagade
We don't have a video for # C56274 the 2020 Renegade yet, but the information shown in the video for the 2019 model should still be accurate as there weren't major changes for the 2020 model. I've linked the video for you.
view full answer...
Troubleshooting Green and Yellow Wire Always Have Power on 2018 Jeep Renegade 4-Way
Based on what you are describing it sounds like the issue with your # C56274 is the ground. A weak or bad ground is often the cause when some functions maintain power while others operate normally. Make sure it is secure on a clean, bare metal surface and damage free. If you check and secure the ground and that does not fix the issue I would go ahead and check for a short. If the 12V power from the battery is contacting the other wires or the frame it could also cause this problem. If...
view full answer...
Trailer Hitch Recommendation for 2020 Jeep Renegade Latitude
For your 2020 Jeep Renegade Latitude the Draw Tite part # 76021 is the way to go as it has the highest towing capacities and the easiest install. I attached an install video for this for you to check out as well. Then if you needed trailer wiring as well the Curt kit part # C56274 is a really great option that's easy to install and reliable. I attached an install video for this as well.
view full answer...
Troubleshooting Curt C56274 Powered Trailer Taillight Converter Installed on 2020 Jeep Renegade
You'll first want to determine if the problem lies on the vehicle side of the equation or the trailer side. You can easily determine this by using a circuit tester like # PTW2993. Activate the left turn signal on the vehicle and use the tester on the trailer connector pin fed by the yellow wire. If you don't get signal on that pin, check the connection where the taillight converter plugs in line with the driver's side taillight harness. Make sure those connections are plugged in all the...
view full answer...
Trailer Wiring Recommendation for 2016 Jeep Renegade
For trailer wiring for your 2016 Jeep Renegade we have kits that are plug and play style that do not require any splicing. For that I would recommend the Tekonsha kit part # 118651 which is a confirmed fit and will work well. Tekonsha is our most reliable trailer wiring harness brand so it will work great for you. I attached an install video for you to check out as well.
view full answer...
Recommended Hitch and Wiring Harness for a 2016 Jeep Renegade
I would be happy to. To tow a trailer with your 2016 Jeep Renegade you will need the following parts: Trailer Hitch - etrailer Hitch item # e37AR 4-Way Wiring Harness - Curt T-Connector Vehicle Wiring Harness item # C56274 Ball Mount Kit - Curt Towing Starter Kit for 2" Hitches item # C45534 This set up will allow you to tow a trailer without brakes that uses only a 4-flat connector to control your trailer's lighting functions. If you are towing a trailer with brakes you will need...
view full answer...
EcoHitch Hidden Trailer Hitch Receiver and 4-Way Flat Wiring Harness For a 2017 Jeep Renegade
Here is the EcoHitch Hidden Trailer Hitch Receiver # EH83VR which you saw in the YouTube video being installed on a 2017 Jeep Renegade. I have also linked the installation video below for you to see from our website. I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56274 when you install the receiver. This will give you a 4-way flat connector if you ever need to tow a small trailer or need Auxiliary Lights # C53201 for a hitch mounted accessory which impairs the view...
view full answer...
Recommended Trailer Hitch Receiver and Installation on 2018 Jeep Renegade
That is definitely not true for an aftermarket hitch to be added to your 2018 Jeep Renegade. I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver # 76021 to get a 2 inch hitch receiver opening compatible with more accessories and ball mounts. I've attached a video of this installation for you to check out so you can see the ease of install and that the bumper doesn't even get adjusted at all. It will take an estimated 40 minutes for this install according to the attached...
view full answer...
Will the Curt T-Connector Vehicle Wiring Harness for a 2021 Jeep Renegade Work with LED Package
The Curt T-Connector Vehicle Wiring Harness part # C56274 is listed as a fit for a 2021 Jeep Renegade, all models so there are no fit exclusions for certain features. Therefore, so long as the LEDs are factory there will be no problems with the Curt T-Connector Vehicle Wiring Harness.
view full answer...
Custom-Fit 2-Inch Trailer Hitch Availability for 2015 Jeep Renegade Latitude
Both 1-1/4-inch Class II and 2-inch Class III custom-fit hitches are offered for your 2015 Jeep Renegade Latitude. All can be seen on the included link. Curt Class III hitch # C13269 fits all Renegade models. This hitch includes all hardware and installs without drilling. We have not had a chance to video an install on the 2015 Renegade. If you plan to tow use ball mount part # C45030 and for a wiring harness you can use # C56274. For a hitch ball use either 2-inch ball # 63845 or 2-5/16-inch...
view full answer...
Why Does Power Wire of Trailer Wiring for 2017 Jeep Renegade Have to Run to Battery
The reason you want to run the power wire all the way up to battery is so that you bypass all of the delicate wiring of your vehicle. The power wire is required on trailer wiring harnesses for some vehicles because the electrical system on those vehicles cannot handle the amperage draw associated with trailer lights. Powering the converter box with a power source that doesn't come from the battery would defeat this safety feature and would open the vehicle's wiring up to damage in the event...
view full answer...
Trailer Taillights Stay On After Trailer Wiring Harness Install
With your plug-in trailer wiring harness, the Curt T-Connector Vehicle Wiring Harness part # C56274 on your 2018 Jeep Renegade then you will need to test the running light circuit leaving the converter box. If this wire has power while the vehicle's taillights are off, then you will need to replace the converter box.
view full answer...
How Does a Wiring Harness Attach to Draw-Tite Trailer Hitch 76021 on a 2017 Jeep Renegade
To utilize the wiring bracket on trailer hitch # 76021 for your 2017 Jeep Renegade you will need mounting bracket # 18144. The hardware is included to mount it. Then you can have the 4-Way mounted in the bracket. The trailer wiring harnesses for the 2017 Jeep Renegade, # 118651 and # C56274, both plug in line with the tail light wiring on the vehicle. They will install the same way as in the 2016 model in the video I have linked. They will work with the above mentioned mounting bracket. In...
view full answer...
Will the Curt 56274 Wiring Harness Fit a 2021 Jeep Renegade Latitude
Yes. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56274 is a confirmed fit on all trim packages of the 2021 Jeep Renegade including the Latitude trims. I've linked an installation video of this harness for you to check out, as well.
view full answer...
4-Way Trailer Wiring Recommendation for 2017 Jeep Renegade
We have the Curt trailer wiring harness part # C56274 which is a confirmed fit for your 2017 Jeep Renegade and would work well. I attached an install video for this for you to check out too.
view full answer...
Recommended Trailer Hitch For A 2022 Jeep Renegade
No problem! For your 2022 Jeep Renegade I recommend checking out the Curt Trailer Hitch Receiver # C13269. This is a class III trailer hitch that has a maximum towing capacity of 3,500-lbs, a maximum tongue weight capacity of 525-lbs, and has a gloss powder coat finish that provides superior rust resistance. Additionally if you're looking to complete your towing setup, you're also going to need a wiring kit # C56274 and a ball mount like # C45030. I've also included an FAQ that shows...
view full answer...

< Previous

Next >

Do you have a question about this Custom Fit Vehicle Wiring?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Jameson C

Video by:

Andrew K

Edited by:

Lindsey S

Video Edited:

Joshua S

Video Edited:

Jacob T

Video Edited:

Dustin K

Video Edited:

Chris R

Installed by:

Cole B

Written by:

Chelsea B

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Isabelle B

Test Fit:

Andrew S

Test Fit:

Robert C

Test Fit:

David F

Test Fit:

Bradley B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.