Will Curt Aux LED Light Strip Kit C53201 Trigger Warning Light On Dash Of 2017 Jeep Renegade ?
Updated 10/02/2026 | Published 09/26/2026 >
Products Featured in This Question
Question:
I have a 2017 Jeep renegade trailhawk with a 4-pin trailer harness. Will this kit trigger trailer light warning due to low resistance from the LED lights?
asked by: Jeff R
Expert Reply:
Hey Jeff,
That shouldn't be an issue. If you have a powered 4-way harness like the Curt T-Connector # C56274, it uses a converter and draws power directly from the battery for the trailer lights, so the Jeep isn't relying on the resistance of the Curt Auxiliary LED Lights # C53201 to monitor the lighting circuits.
Even if you have a different brand 4-way harness, I wouldn't expect the low draw of these LEDs to trigger a trailer light warning as long as the harness is functioning properly.
We've seen instances in the past where certain electronics require resistors added to the wiring, but I don't expect that in this case at all.
Are these lights going on a bike rack or cargo carrier, or something else?

Richard B.
9/29/2026
Over the last 4 years I have ordered to two sets of these auxillary lights that I use on my bike carrier. I plug them into my 2020 Sprinter trailer plug in. The only thing it triggers is a question about monitoring the blind spot if I’m towing a trailer. I answer no and everything works normally. The lights work perfectly, and add a great deal of safety.

Dan T.
9/30/2026
The lights worked out great. Easy to install. I would buy again.


Andy
10/2/2026
We really like these lights. The product works great on our Bike Rack.


Product Page this Question was Asked From
Curt Auxiliary LED Indicator Lights
- Accessories and Parts
- Hitch Bike Rack
- Hitch Cargo Carrier
- Lights
- CURT
more information >
Continue Researching
- Q&A: Is There A Light Kit Available For The Kuat Piston Pro Bike Rack?
- Q&A: How to Trick the Sensors on a Volvo to Stop Beeping When Using a Bike Rack
- Q&A: Best Bike Rack For Carrying Tow E-Bikes On A Grand Design 260RD 5th Wheel
- Q&A: What Size Lock Fits a BTBRV InstaLatch Ball Mount
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Lighting Solution for Kuat NV 2.0 Bike Rack
- Q&A: Can Modifying the Lower Shutters on a 2025 Ford Maverick Hybrid Cause Problems?
- Q&A: What RV Rated Bike Rack for do You Have for Two 55-lb E-Bikes on a Travel Trailer with a Spare Tire?
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: My Trailer Hitch Doesn't Fit
- Article: Best Bike Racks for Electric Bikes
- Article: Wiring a Tow Vehicle to Tow a Dinghy
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Wiring Diagrams


Curtis
9/29/2026
Jeff, I ran 2 separate sets of these lights on a cargo carrier at the same time with a harness plug splitter and a 4 way flat wiring plug on a 2018 Dodge Journey. Had no problems and was very impressed with the way they worked. A lot of Dodge and Jeep parts are interchangeable so I wouldn’t see a problem.