Measurements of CE Smith Rollers and Brackets # CE32100G and # CE32110G

Updated 01/07/2014 | Published 01/04/2014

Products Featured in This Question

CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4"

(151)

$32.60

CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber

(421)

$45.20

CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Yellow TPR

(421)

$48.84

CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 4"

(132)

$34.22

Question:

Can you please provide the following info on both of these products? CE32100G CE32110G I need the height from bottom of bracket to the center or roller hole/shaft. What fasteners are used for each and what trailer tongue size they may be reccomended for. i.e. 2foot x 2inch or 3inch x 3inch for example. My tongue is 2 x 2 tube steelAlso since the roller shaft is 5/8inch I need the measurement of the height/diameter of the roller and the overall height of bracket with the roller to see if either will match up well with existing fixed position brackets.

asked by: Dave

Expert Reply:

First, roller with bracket # CE32100G is not going to work because the mounting holes on it are spaced 3 inches apart on center so it would be too wide. It measure approximately 2-1/2 inches from the bottom of the bracket to the center of the shaft. The overall height is approximately 3-13/16 inches. And from the center of the shaft to the top of the roller is approximately 1-3/8 inches.

Roller and bracket # CE32110G has mounting holes that are a little closer together at 2-1/2 inches but still too wide for a 2x2 inch frame. From the bottom of the bracket to the center of the shaft is approximately 3-5/16 inches. Overall height is approximately 4 inches. The roller sticks up approximately 1-7/8 inches from the center of the shaft.

You would need something like # CE32005G or # CE32015G which are adjustable and meant for 2 inch wide trailer frames. These are the only option we have that are going to fit 2 inch wide frames.

expert reply by: Michael H