Best Honda CR-V Trailer Lights

When my 7 year old utility trailer lost it's lights, I looked for a solution. The package came quickly and was easy to install. It was a good idea to include the wiring kit along with the Lights because I installed the lights first and discovered that the problem wasn't solved. I then rewired the entire harness and it all works well. I would recommend one change - instead of the wire nuts, add a waterproof heat sealing connection - I soldered my wire connections using a heat shrink wrap. Also - waterproof tap in connections for the side running lights would be helpful.

Always the best of quality and most complete package of trailer light replacements which is why I go to etrailer.com and am a repeat customer. These folks could write the book on how to give outstanding customer service and their people always friendly, professional and knowledgeable. This company is always a pleasure to do business with !!!!

Item arrived in very secured packing, shipping was fast, the quality is very good, I will buy again from you, Thank You.

Really cheap. These lights are marketed as submersible, but based on what's in the package I'm really dubious. The lens bodies are not sealed. As you can see My photo, each lens body has a clearance hole for the wire - No gasket, and plenty of room around the wire, So water will definitely flood in and submerge the contacts and bulb/socket If you put these on a boat trailer. Additionally, to Make the wire connections. They give you wire nuts. For submersible wire connections, at the very least, you should use crimp butts wrapped in tape - or better yet a heat shrink crimp butt. But they give you wire nuts, which aren't even really stable against vibration, let alone moisture. It does say 3-year warranty on the package, however, so I guess I'll be testing that out.

They look great installed. Only recommendation I can make is to include crimp connectors at least for the side marker lights and perhaps a small length of protective wire wrap. All in all I’m very pleased.

Excellent product. My old trailer lights were corroded and only worked intermittently. I began trying to clean & repair them, but it was a major PIA. I realized I could buy a brand new set for a reasonable price. They arrived today. This afternoon I installed them with no difficulty. They work great! On-line ordering was clear and easy. Shipping was fast, etrailer kept me informed of my order status.

Light was the same size as previous one on EZ Loader boat trailer. Easy to install and very bright. Original one made it 10 years and had moisture inside causing most of the LEDs to stop working.

Very clean installation on my home-built e-tricycle carrier. Works perfectly. Nice and bright!

Worked great on our motorhome.

Product worked perfectly for what we were using it for. I purchased a motorcycle and needed to move the license plate bracket to be able to add bags. I found your bracket online, knowing we were going to have to jerry rig it to where we wanted to mount it. I was a little suprised the bracket was plastic when I received it, but still worked great. A friend made 2 mounting brackets from a flat bar, cutting and bending them to the length and angle we needed. Drilled holes and mounted them under the rear fender. Mounted the license plate bracket on the other ends of the custom brackets and wired it in for lights.

Beautiful tail light. Very bright for the brake and turn signal. Fitted it on the back of my trailer with an L bracket.

Very nice. Replaced an incandescent unit.

Beautiful tail light. Very bright for the brake and turn signal. Fitted it on the back of my trailer with an L bracket.

All new wiring on a trailer rebuild. These junction boxes make the job so much easier and faster. Now when i troubleshoot wiring issues im chasing one wire at a time. Oh and now the wiring goes in a location that works for me

This order arrived on time. And was easy to install with all the proper hardware. The web site said delivery by Thursday 8/29 and it showed up on Thursday evening. These really looked far better than the lights I replaced. I’m sure will get a lot of years from this product. Thanks again

The trailer lights were shipped and arrived on time exactly as described. The lights were easy to install and have been working for almost a year now.

Perfect fit for my Eagle boat trailer. FYI, I bot the lights hoping that the replacement would fix several lights out problems that made no sense. I installed the replacement light and everything started working. Great!

I ordered some replacement parts for my utility trailer. My experience could not have been better. First of all, I ordered on the phone, reaching a friendly voice. Quickly the order was processed, which was also followed up with a confirming email about the order. Not long after the order that day, I got a message from another associate who advised the order is shipped and would be arriving in just a few short days. When I got the order, the parts were carefully boxed to prevent damage. The quality of the parts was excellent. I installed the parts, and tested, finding them working as expected. It goes without saying my order experience was friendly, efficient and reliable. I would recommend others consider using this company. I would not hesitate to use them again in the future should I need anything they offer.

I’ve had them on my boat trailer for over a year still working great Thanks, etrailer great product

Easy Install. Worked as expected. Appear to be waterproof.

I bought a couple more of these two-diode LED clearance lights to add some more lighting to the rear of my kayak trailer. They work nice and are easy to install in 3/4" holes that I drilled through a piece of aluminum angle. The trailer has orange clearance lights on the front sides, red clearance lights on the back sides, the stop/turn/parking lights on the back, three red clearance lights on the back, and a white LED license plate light. It's really lit up and very visible at night from the rear and sides. Thanks to etrailer.com for great products and services! My wife and I like to kayak, but we don't like to deal with putting our kayaks on roof racks on the top of a car. So I bought a used Load-Rite trailer that was designed to hold one Jet Ski, and added a frame made of slotted angle and 2x6 lumber to hold the kayaks, and a cargo box from Tractor Supply to hold kayak seats, life jackets, towels, sun-protection clothing, and some spare gear (ropes etc), and bought all new LED lighting from etrailer.com. The paddles are too long for the cargo box so they have to go in the car! The kayaks are tied down to the trailer with several ropes front and rear, so there is a lot of safety factor in the design....I don't worry about the kayaks coming off the trailer! The entire rig works great....when we return from a kayak trip we just back the trailer in the barn and it's ready to go for our next trip. I put a 5" diameter wheel on the trailer just behind the hitch so I can push it around on flat level surfaces. See the pictures.

Great addition to the basic, rear brake lights of a camp trailer. I added these LED RED to the brake/turn function, within the existing, small holes in the rear bumper--much more apparent when stopping/turning. These sealed LED lights are very common on larger trucks and trailers now. Easy to install and very robust assembly...priced right!

These are very bright compared to the single bulb 12V standard lights they replaced. Excellent for clearance lights on the side rear of the horse trailer

I replaced a red LED marker light on my RV a year ago. The original leaked water and failed after about 4 years. It was easy to swap out. It is still dry inside and functions fine.

I bought 3 lights (1) spare. I lost the brake light function on one about 9 months after installation. Lights are very bright and durable. Only negative, wires weren't labeled for function/usage.

Two of these lights were mounted on a rear hitch bike rack since the truck tail lights can't be seen with the bikes on the rack. I am extremely happy with the quality and brightness of the lights. Shipping was great and items were packed with care.

Direct replacement for the tail light that is broken. Thanks.

These light were a good replacement set for my Home Depot Snowbear trailer taillights. Best price I found for this or similar was here at etrailer.com. Pic is not of my own trailer but is the same model. You can see the configuration of the taillights.

After ordering July 11th and a roundtrip from Missouri to L.A. to Keswick Ontario, Canada we received the shipment July 25th. Tailights fit my 2006 Ranger trailer perfectly. Thanks to Paul for tracking my shipment when it didn't arrive on the originally scheduled delivery date and keeping me updated.

Product is perfect and quick shipping.

A pretty good piece of plastic wig adhesive backing. Fit perfectly where it should.

We broke a reflector on our boat trailer, bummer. My husband picked out the reflector he wanted and I ordered it. Simple and easy ordering system. I do recommend etrailer.

Great replacement lights for my camper. Perfect fit and well designed.

These are very bright compared to the old 12 volt, single-bulb varieties they replaced. Easy to mount and I recommend them.

I purchased $XX worth of led lights 6 marker lights and 2 ovals. The marker light had a protective wrapper and showed up pristine condition, however both ovals were thrown in the box with no protective wrapper the clear oval has a scratch but is still in good condition the red oval has scratches all over it to the point it looks used. Pretty Sad. Wish I could off included photos but it was hard to see the scratches In the picture my camera isn't the greatest.

I had to replace one burned tail light on my 2005 cargo trailer. I bought two and replace the other one as well. They work perfectly. The size and the 3 pins connction are the same as the original. A little downside is regarding the packaging. I would expect each light wrapped individualy to avoid the rattling in the box. See pics.

This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.

Great Product, it's good quality and will fit perfectly for the trailer I use in my Air Conditioning, Heating & Refrigeration Business. The only problem is I ordered the wrong side. Wasn't sure if by the which one was the left or the right? I was looking at the trailer form the front when I determined it was the left one but it appears your suppose to look at the back of the trailer when you do that. Guess I will be ordering the otherside here shortly. Maybe I can get an exchange or if not then I will have a spare and hope if it does get broken again it's the other side. Etrailer has some really good quality stuff at a very good price. I got my hidden hitch from them at a Great Price. They even had a video that showed me how to install it. A couple of the local places here wanted 3 times the amount of what I paid to provide the hitch and install it for me. Will never go anywhere else for any trailer parts or accessories.

I found that the travel trailer OEM tail lights were blocked by the cargo carrier. I installed these light as an extension of the OEM tail light. These lights enhanced the OEM lights. Now I worry a bit less about the vehicles behind me.

I really like them for my teardrop trailer we are building. It was an excellent choice. Thank you