# 1
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
Product was delivered on-time as expected. This adapter is being used on a Volvo XC60 with a retractable receiver. Although it fit in the receiver the locking hitch pin did go all the way thru without a little brute force. Not sure if it is a receiver, adapter, or a hitch pin problem. Would have been nice to have a little more guidance.
The part was for a 2025 Volvo XC60. It fits perfectly with the Volvo’s tow hitch. I can now use my bike rack without an issue.
# 2
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
Solid heavy duty steel. Fits snugly into hitch.
# 3
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
The quality of the hitch adapter looks great and very stout.
Works great with our bike rack.
# 4
CR Brophy Hitch Extender for 1-1/4" Hitch Receivers - 5-3/4" Long
Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.
Adapter works as it should. Seems strong and secure.
# 5
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
2” or 4” up/down is the solution I needed for a flat tow, 4” lower drop and a 2 bike rack, 2” rise. Very well constructed and looking for years of service out of this drop/rise combination!
Wanted to be able to combine tow hitch and bike hitch. This required a 2" drop and a 4" rise with a 10K lb capability. Etrailer.com came thru with product, price, special free shipping, and great customer service. Ordered on Sun and received on Wed and installed on Thur and ready to go!
# 6
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
I purchase this to use with a Thule bike rack. The Thule rack requires a 2-in receiver so this should have worked. However it's so shaky and loose that I didn't feel comfortable driving it down the street. I should have returned it but I went back to using another vehicle I have with a 2-in receiver.
Hitch pin hole was too far up the shaft and couldn't lock into the receiver. Had to return.
# 7
Curt Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long
Perfect fit to extend the hitch to allow my bike rack to clear the back bumper. Great quality as well.
This hitch extension was exactly what I needed. New hitch on the Toyota Avalon has the receiver box a little too far under the bumper to fit my bike carrier. The diagonal support on the carrier didn't allow hitch pins to align without modifying (cutting) bumper. This extension was a simple yet effective solution to moving the carrier away from rear of vehicle. (Photos were taken without hitch pin in place) The item was in stock and shipped rapidly. Thank you etrailer.
# 8
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
It worked, till it didn't. It's a short smaller tube inside a larger tube, only held together by two spot welds. The spot welds split/detached allowing the inner sleeve free movement! I have a bike w stinger expanded to grip the inner tube and a little safety catch on outside. The safety catch was the only thing keeping my rack from sliding completely off! For the price this should've been a solid milled piece. Don't rely on these welds unless you have two through hitch pins one on car and one through the adapter end.
Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.
# 9
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.
I would like to tell you about my experience with etrailer.com. I am a return customer because I always find what I need at reasonable prices, quick and inexpensive shipping charges. I ordered this for a 1999 GMC Safari to fit my new Draw Tite hitch. I use it for my bike rack which fits like a glove. I highly recommend etrailer.com. I feel they are a very good company to deal with because I get personal service which is uncommon these days.
# 10
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Product quality is fine, however, tried to use with an ebike rack on upper hitch and flat tow hitch on bottom. Vehicle sway at highway speeds was too much, and I found bike rack on back of the towed Jeep was better.
Works great. We're towing a jeep and have a bike rack behind our motor home.
# 11
Curt Hitch Extender for 2" Trailer Hitches - 14" Long
I have a Can Am Defender and the actual hitch is up under the back end so when I hooked up a trailer, I couldn't raise or lower the trailer without the crank handle hitting the tail gate, now I have plenty clearance and I love it.
Works great and reasonably priced. etrailer Customer Service is absolutely the very best. My first shipment arrived missing the hitch extension. Customer Service quickly responded to my communications and shipped a replacement the same day. As you can see from the photo the hitch extender is perfect for my Polaris Ranger and allows me to use my small lawn n yard implements. I highly recommend etrailer.
# 12
Hitch Extender For 1-1/4" Trailer Hitch Receiver 10"
I recently had a hitch installed on my car. Since the cargo carrier that I have was used previously without an adapter, I assumed that I didn't need one. Now trying to locate one was more of an effort than locating a hitch. The local auto parts stores of national brands don't keep them in stock. One store made an inquiry but didn't give me much hope. Now I can make a rode trip in confidence that the carrier will be secure as I head down the interstate.
I installed a hide away hitch on my son's Mustang (College kid, cramping his style), Wayne really helped me with this 10 inch extender. The part came the next day. Excellent part and excellent service.
# 13
Trailer Hitch Adapter - 1-1/4" to 2" Hitch - 4-1/2" Drop/5" Rise - 6-1/2" L
Work well to adapt my heavy duty two bike rack that holds electric bikes to the lighter receiver on the Hyundai Accent. Happy with the performance.
Fit is good, heavy duty, solid extension/adaptor. Good finish.
# 14
Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise
Rattle’s excessively when there is not a load. the dual hitch is great. I am able to tow my trailer and carry my bike rack
Great double hitch adapter! Very well made and strong!
# 15
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
This is a much higher quality (thick and heavy) than I imagined it would be; I'm pleasantly surprised. I'll be using it to mount a trailer hitch cargo carrier and a dog step at the same time when we go on long vacations.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 16
Roadmaster Dual Hitch Receiver Adapter with 2" or 6" Drop/Rise
Worked out great for my family bike adventure. Traveled with that setup over 1000 miles and it was easy drive. I had cargo carrier on the bottom and bike rack on top, and with that setup and 4 people on board still plenty of ground clearance 11". Dual hitch is a solid piece of steel that can carry a lot of lbs. Just don't overload max. tong weight, need some room for safety!
Quality hitch. Quick shipping. Looks a little close to the motorhome bumper
# 17
Hitch Extender For 2" Trailer Hitch Receiver 7"
I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.
Good quality, heavy duty took a couple extra days to get here otherwise great product
# 18
Trailer Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long
Perfect extension for my bike rack to fold up properly while not transporting a bike.
I have purchased trailer hitches for my last 3 vehicles. All bought on etrailer.com. I appreciate the high level of customer service !
Fit Check: 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches on a 2016 Ford Fusion
Today, on our 2016 Ford Fusion, we'll be doing a test fit on the Curt Cargo Carrier. That's part number C18110. I've already got it loaded up on the Fusion just to give you a good idea what it looks like. As you can see, it's a mid-size cargo carrier. We've got plenty of areas to tie down our cargo along the raised wall here. It's got a mesh floor, so it's going to be easy to clean. Dirt and debris is just going to fall right through as well.
Rola 21x55 Hitch Cargo Carrier Review - 2016 Ford Fusion
Today on our 2016 Ford Fusion we'll be doing a test fit on the Rola cargo carrier. That's part number 59507. I've already got it loaded up on the Ford Fusion just to give you a good idea of what it looks like. As you can see, it's a sizable carrier. We've got plenty of room to tie down our cargo if we choose to. Its dimensions are 21 x 55.
Surco Products Hitch Cargo Carrier Review - 2016 Ford Fusion
Today, on our 2016 Ford Fusion, we'll be doing a test fit on the Surco Cargo Carrier. That's part number 52017. I've already got it loaded up on the Fusion, just to give you a good idea of what it looks like. I would say it's a mid-sized cargo carrier. We've got plenty of room to tie down our cargo on the raised side rails here. Got a nice mesh floor, so dirt and debris is just going to fall right through, which means it's going to be really easy to clean. Its dimensions are twenty by forty-eight.
Surco Products Hitch Cargo Carrier Review - 2015 Ford Fusion
Today on our 2015 Ford Fusion we're going to be doing a test of this Circo 20x48" Cargo Carrier. This is going to be a steel construction with an 1 1/4" shank for your class 1 and 2 hitches. It also has a 300 pound weight capacity. Here we're going to show you how it fits and looks on our vehicle that we have here today. Do keep in mind that the hitch pin and clip is not included with this but if you'd like to obtain one you can get it for part #PC2 on our website. All right, let's get started. Insert the shank into the receiver and line up the pin holes.
Rola 21x55 Hitch Cargo Carrier Review - 2015 Ford Fusion
Today on our 2015 Ford Fusion we're going to be doing a test fit of our 21x55" Rola Cargo Carrier. This is going to be part #59507. It comes with a steel construction, an 1 1/4" shank for your class 1 and 2 hitches, as well as a 300 pound weight capacity. Let's go ahead and get it fit in here and see what it looks like on our vehicle. First step to do is going to be to insert the shank into the receiver then we'll line up our pin holes. Once we have our pin through, go ahead and place your clip through.
Rola 21x55 Hitch Cargo Carrier Review - 2014 Ford Fusion
Today on our 2014 Ford Fusion, we're going to be doing a test fit of the Rola cargo carrier. Now, this cargo carrier is going to be 21 inches wide, 55 inches long, and with its sturdy, steel construction, it's going to offer a 300-pound weight capacity. Now, do keep in mind that this rack does come with your inch and a quarter shank, but it will only be acceptable to use with your class 2 receivers. Now, if you choose to get a hitch pin and clip for this, since it is not included, that hitch pin and clip can be located on our website, part number PC2. All right, let's go ahead and start off by getting a few measurements. This will be part number 59507.
Surco Products Hitch Cargo Carrier Review - 2014 Ford Fusion
Today on our 2014 Ford Fusion we're going to be doing a test fit of the Surco cargo carrier. Now this is going to be twenty inches wide by forty-eight inches long, and with its sturdy, steel construction it's going to offer a three hundred pound weight capacity. Keep in mind that this is an inch and a quarter shank, and we do have a class two receiver on our vehicle right now. Now, with the hitch pin and clip that attaches this cargo carrier to the vehicle that will not be included. It's going to be part number PC2 on our website if you wish to have one or gift one if you do not already have one. All right, let's go ahead and start off by getting a few measurements. Our closest distance will be our first measurement.
Rola 21x55 Hitch Cargo Carrier Review - 2013 Ford Fusion
Today on our 2013 Ford Fusion we're going to be doing a test fit of the Rola cargo carrier. This Rola cargo carrier is going to be 21" wide, 55" long, and with the sturdy steel construction is going to offer that nice 300 pound weight capacity. As you can see, it's going to have that nice expanded metal base as well to help for easy cleanability. Down on the bottom side it's going to attach using our 1-1/4" shank. That 1-1/4" shank will be compatible with your class one and two hitches. The hitch pin and clip is going to be sold separately as well.
Surco Products Hitch Cargo Carrier Review - 2013 Ford Fusion
Today on our 2013 Ford Fusion, we're going to be doing a test fit of the Surco Cargo Carrier. This Surco Cargo Carrier is going to be 20" wide by 48" long, with an expanding metal base that's going to be easily washable and maintainable. It's also going to have full access to the back of your trunk at this point. Not really too much of a hindrance as far as stacking any items on there. It's going to be part #52017. We'll start off by getting a few measurements and then going through how it's set up. Our closest distance will be the first measurement.
Surco Products Hitch Cargo Carrier Review - 2011 Ford Fusion
Today, on this 2011 Ford Fusion, we're going to be test fitting the Surco Cargo Carrier, part number 52017. This cargo carrier has a carrying capacity of 300 pounds. It has this mesh floor, which makes it easy to clean, and around the borders of the cargo carrier, we have this rail which can be used as a tie in point for either your ratchet straps or your bungee cords. I'm going to go ahead and you give you some measurements. Measuring from the bumper to this rail here, we've added about 23 inches to the rear of the vehicle. For our ground clearance, we're at about 11 inches. For our closest point, which is this edge here, we're at about a quarter of an inch from the vehicle. Now, the exhaust of this vehicle's going to be on the passenger's side and it is close to the cargo carrier so you do want to be carrier whenever you're loading any heat sensitive material to make sure to keep it on the driver's side. We have total access to the trunk with the cargo carrier installed.
Surco Products Hitch Cargo Carrier Review - 2010 Ford Fusion
Today on our 2010 Ford Fusion, we're going to be doing a test fit on the 20 by 48 Surco cargo carrier for 1 1/4-inch hitches, part number 52017. On this cargo carrier, it features a nice steel mesh floor which is going to allow any dirt or debris to fall through so it's going to help you keep this clean much easier. Around the edges here, it's got this nice thick frame which allows you to put tie downs just about anywhere. It's got a nice black powder coat finish to help resist rust and corrosion. It's also got these crossbars here just for a little bit of extra added support which helps give it that 300-pound weight capacity. But on this particular vehicle, it's got a class 1 hitch with a 200-pound ton weight rating so you'll definitely want to keep that in mind when loading it up. The ground clearance here at the back of this one is right about 11 inches.
Does it Fit? Testing the 19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches on a 2010 Ford Fusion
Today on our 2010 Ford Fusion, we're going to be doing a test fit of the 20 by 48 Curt cargo carrier for 1 1/4 and 2-inch hitches. Part number C18110. This particular cargo carrier has a number of nice features. One of which being the steel mesh flooring that's going to be easy to keep clean because dirt and debris can fall right through but it's also nice and sturdy. Then it's also got these walls here. These walls are about 2 3/4 high.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."