Best Chrysler Town and Country Trailer Lights

Light was the same size as previous one on EZ Loader boat trailer. Easy to install and very bright. Original one made it 10 years and had moisture inside causing most of the LEDs to stop working.

Very clean installation on my home-built e-tricycle carrier. Works perfectly. Nice and bright!

Item arrived in very secured packing, shipping was fast, the quality is very good, I will buy again from you, Thank You.

Really cheap. These lights are marketed as submersible, but based on what's in the package I'm really dubious. The lens bodies are not sealed. As you can see My photo, each lens body has a clearance hole for the wire - No gasket, and plenty of room around the wire, So water will definitely flood in and submerge the contacts and bulb/socket If you put these on a boat trailer. Additionally, to Make the wire connections. They give you wire nuts. For submersible wire connections, at the very least, you should use crimp butts wrapped in tape - or better yet a heat shrink crimp butt. But they give you wire nuts, which aren't even really stable against vibration, let alone moisture. It does say 3-year warranty on the package, however, so I guess I'll be testing that out.

Beautiful tail light. Very bright for the brake and turn signal. Fitted it on the back of my trailer with an L bracket.

Very nice. Replaced an incandescent unit.

They look great installed. Only recommendation I can make is to include crimp connectors at least for the side marker lights and perhaps a small length of protective wire wrap. All in all I’m very pleased.

Excellent product. My old trailer lights were corroded and only worked intermittently. I began trying to clean & repair them, but it was a major PIA. I realized I could buy a brand new set for a reasonable price. They arrived today. This afternoon I installed them with no difficulty. They work great! On-line ordering was clear and easy. Shipping was fast, etrailer kept me informed of my order status.

Worked great on our motorhome.

Product worked perfectly for what we were using it for. I purchased a motorcycle and needed to move the license plate bracket to be able to add bags. I found your bracket online, knowing we were going to have to jerry rig it to where we wanted to mount it. I was a little suprised the bracket was plastic when I received it, but still worked great. A friend made 2 mounting brackets from a flat bar, cutting and bending them to the length and angle we needed. Drilled holes and mounted them under the rear fender. Mounted the license plate bracket on the other ends of the custom brackets and wired it in for lights.

When my 7 year old utility trailer lost it's lights, I looked for a solution. The package came quickly and was easy to install. It was a good idea to include the wiring kit along with the Lights because I installed the lights first and discovered that the problem wasn't solved. I then rewired the entire harness and it all works well. I would recommend one change - instead of the wire nuts, add a waterproof heat sealing connection - I soldered my wire connections using a heat shrink wrap. Also - waterproof tap in connections for the side running lights would be helpful.

Always the best of quality and most complete package of trailer light replacements which is why I go to etrailer.com and am a repeat customer. These folks could write the book on how to give outstanding customer service and their people always friendly, professional and knowledgeable. This company is always a pleasure to do business with !!!!

I bought my Haulmark 12'x6' Enclosed trailer used a few months back. The trailer was in good shape but the sun faded out the marker lamps. Since I use the trailer as a landscape equipment trailer I'm usually not working at night but now with the daylight savings hour change I find myself getting home when it's dark and now those faded lamps were bugging me. Since I've had great experience in the past with etrailer.com I decided to take the plunge and change out the 14 marker lights to their LED versions...Wow what a difference. Not only are my lamps no longer sun faded but they are bright! Definitely was worth the money and the installation was quick since they simply snap into place. Thanks, RAM

These guys are good,we build a few trailers in our shop, & these guys have the inventory, you get it fast & you can get them on the phone, we need more outfits like this to do business with! Thanks Guy's--

I installed the new fender lights and they work great.

I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. My previous lights sat in the middle of the fender. These sit on the edge so you get a true picture of your edges at night.

I installed these on my overland trailer project and they work perfectly

I love the look of these led lights at night. Get a lot of positive comments also. Shipping time was awesome. Thanks George and Carol. Dan

Perfect fit for my Eagle boat trailer. FYI, I bot the lights hoping that the replacement would fix several lights out problems that made no sense. I installed the replacement light and everything started working. Great!

I ordered some replacement parts for my utility trailer. My experience could not have been better. First of all, I ordered on the phone, reaching a friendly voice. Quickly the order was processed, which was also followed up with a confirming email about the order. Not long after the order that day, I got a message from another associate who advised the order is shipped and would be arriving in just a few short days. When I got the order, the parts were carefully boxed to prevent damage. The quality of the parts was excellent. I installed the parts, and tested, finding them working as expected. It goes without saying my order experience was friendly, efficient and reliable. I would recommend others consider using this company. I would not hesitate to use them again in the future should I need anything they offer.

Same review again. Excellent product, easy to install; looks great.

And great reflectionness?? Now when I crash my trailer lights at least there'll be something back there to show I tried.

Great replacement lights for my camper. Perfect fit and well designed.

These are very bright compared to the old 12 volt, single-bulb varieties they replaced. Easy to mount and I recommend them.

These are very bright compared to the single bulb 12V standard lights they replaced. Excellent for clearance lights on the side rear of the horse trailer

I replaced a red LED marker light on my RV a year ago. The original leaked water and failed after about 4 years. It was easy to swap out. It is still dry inside and functions fine.

This is a good quality light, water tight and worked well. It has been on the trailer for over a year now and still has no issues. The lens can interchange on other similar bases, but if the base is old and damaged like mine was, this is a great replacement.

Easy replacement for my Thor Hurricane back lights.

This light was exactly like described. I purchase a lot on line and use amazon prime for free shipping. I could not find this light on amazon and was very impressed that etrailer.com had very reasonable shipping prices. Instead of gouging the cost was in line what normal shipping cost would be. The shipping and tracking were spot on and the lights were delivered as promised. A VERY good company to work with.

I bought these lights for a boat trailer. They are very bright and we're easy to install. I would recommend to anyone looking for replacement lights

Beautiful tail light. Very bright for the brake and turn signal. Fitted it on the back of my trailer with an L bracket.

All new wiring on a trailer rebuild. These junction boxes make the job so much easier and faster. Now when i troubleshoot wiring issues im chasing one wire at a time. Oh and now the wiring goes in a location that works for me

Direct replacement on my Circle J horse trailer fender.

These lights were exactly what I needed, I didn't find them any where else, I have an all Aluminum Trailer and they go on the fenders, as the law requires for trailers over 80" wide. Thanks for a good product at a good price and very reasonable shipping, I always use the USPS when I can.

I ordered one of the amber-lensed units from etrailer a couple of years ago. That one is still working fine and I expect this one will work equally well now and into the future. They're a little pricey for what they are but they're an exact replacement for the ones on my camper, unlike the less-expensive alternatives I've found that have different spacing on the attachment screws. I don't need any more holes in my RV than I've already got, thank you very much.

I was able to order the exact light replacement for our 5th wheel. None of the area rv stores carried the light. the online system was easy to use and I received the lights in a timely manner.

Product was easy to identify on the website. Shipping and transit time was excellent Price point was very good I was replacing the lights on both sides of the trailer. Both were damaged, one of which was beyond identification. There was enough of the one side that I was able to estimate a replacement. The lights were exact replacements for the original lights. bolt patterns matched up exactly and the ground wire came with a connector already installed so installation was FAST. EVERYTHING I have received from etrailer.com has been spot on and easy to install.

I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. I replaced both fender lights on my trailer. They were easy to install and wired exactly as the previous lights. What I liked about these is that the light goes to the edge of the fender showing the exact edge. My previous lights sat in the middle. Minor detail but I liked it.

Was the exact replacement for my nitro boat trailer. Looks great!

The light itself is decent, where it falls short is surface mounting. The hot and ground wires are of a decent gauge, however, the hole in the side of the lens is too small to pass both wires through it for a surface mounting. The only alternative is to drill another hole in your mounting spot which, on a heavy trailer such as mine, is very thick steel. See picture