# 1
Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens
POS used by Thor to make you purchase a $[XX] plus hunk of plastic to replace a fifty cent light bulb! What [bull]. Warren Buffet screwing the little guy.
Product worked perfectly for what we were using it for. I purchased a motorcycle and needed to move the license plate bracket to be able to add bags. I found your bracket online, knowing we were going to have to jerry rig it to where we wanted to mount it. I was a little suprised the bracket was plastic when I received it, but still worked great. A friend made 2 mounting brackets from a flat bar, cutting and bending them to the length and angle we needed. Drilled holes and mounted them under the rear fender. Mounted the license plate bracket on the other ends of the custom brackets and wired it in for lights.
# 2
Optronics ThinLine LED Trailer Clearance and Side Marker Light - Submersible - 4 Diodes - Amber Lens
Arrived quickly, as described. Much brighter than previous stock marker light(s)
These guys are good,we build a few trailers in our shop, & these guys have the inventory, you get it fast & you can get them on the phone, we need more outfits like this to do business with! Thanks Guy's--
# 3
Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Passenger Side
I installed the new fender lights and they work great.
I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. My previous lights sat in the middle of the fender. These sit on the edge so you get a true picture of your edges at night.
# 4
7" Long White/ 11" Long Red Conspicuity Reflective Tape - (4) 18" Strips
Same review again. Excellent product, easy to install; looks great.
And great reflectionness?? Now when I crash my trailer lights at least there'll be something back there to show I tried.
# 5
Optronics Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - White Base - Red Lens
These lights are really good for the price! (I ordered 16) They aren't cheap feeling or flimsy. They feel sturdy, durable and they look quality. The wires are the correct gauge and the light bulb is in a rubber grommet for weather sealing. The light is sealed very well and it takes some effort to remove the lens cover. The lens is thick and the color is true. The reflector is bright. I was genuinely impressed with lights especially for the cost. These will be replacing older side marker and clearance lights on my older 1985 Sunstream motor home. My lights are faded, some broken, mostly leaking and more costly to replace than what they are worth. These MC32RB and the Amber version lights will look great! Slightly different style, same size and better looking and better quality than the originals. Very happy with lights and etrailer. Will be ordering more items. Thanks. G.
I purchased red and amber lights to replace the faded and broken ones on my travel trailer. Camping World wasn't able to help me. Found you all while searching the internet. Great produce. Great price. Better than the originals. The screws that secure the lights to the trailer are protected from the weather (they are under the removable lens. Easy to install. Ended up replacing all eleven lights.
# 6
Optronics Thinline LED Trailer Fender Light for Trailers Over 80" Wide - 10 Diodes - Amber/Red
Optronics makes really good trailer lights. They don't survive me backing my cattle trailer into poles, but that's my issue. My cattle trailer is 20 years old and originally came with old school bulbs. But Optronics makes LED replacements in the same form factor so I have upgraded as I break them. Nice to know I can still get newer LED bulbs for fixtures that are 20 years old. That's what you get with a company like Optronics. And, etrailer has the best technical descriptions and videos available so I know what I'm getting and that they will fit.
The lights work perfect, very pleased with my purchase
# 7
Incandescent Trailer Fender Light w/ Reflector - 2 Bulbs - Red and Amber Lens - Driver Side
Product was easy to identify on the website. Shipping and transit time was excellent Price point was very good I was replacing the lights on both sides of the trailer. Both were damaged, one of which was beyond identification. There was enough of the one side that I was able to estimate a replacement. The lights were exact replacements for the original lights. bolt patterns matched up exactly and the ground wire came with a connector already installed so installation was FAST. EVERYTHING I have received from etrailer.com has been spot on and easy to install.
I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. I replaced both fender lights on my trailer. They were easy to install and wired exactly as the previous lights. What I liked about these is that the light goes to the edge of the fender showing the exact edge. My previous lights sat in the middle. Minor detail but I liked it.
# 8
LED Combination Trailer Tail Light - 7 Function - Submersible - 23 Diodes - Red Lens - Driver Side
Perfect, light matches exactly. Very satisfied with all my purchases: Hitch, aluminum truck rack, boat trailer lights, wiring harnesses…
I have been more than pleased with the quality and performance of the Optronics brand lights! These are no exception! This tail light assembly is a direct replacement on my ShoreLander trailer. The running lights, including four on the side, are a nice feature. The brake/signal light are more intense as expected. Lastly, the dimensions and mounting holes allowed me to bolt them into place without issue! I, like others, am amazed at the brightness of the lights. They are a huge upgrade over my existing incandescent lamps! I am looking forward to no more burnt/broken bulbs! I have purchased Optronics tailslights in the past, and am purchasing again as I like the quality/performance of the taillight assemblies. I would buy again and I would recommend to others as well!
# 9
Optronics LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Red Lens
perfect replacement for broken markers on my trailer
just what i needed...
# 10
LED Trailer Tail Light - 6 Function - Submersible - 18 Diodes - Rectangle - Red Lens - Passenger
Chose Optronics because of warranty and help from customer service at etrailer. Staff is awesome, very knowledgeable. Light is very bright, installation very easy, all holes lined up with factory holes on a 2001 Shoreland'r boat trailer
The lights fit and function perfectly. Beware of the USPS, however. Their tracking system is terrible, but that is a whole separate issue. Etrailer did an excellent job.
# 11
7" Long White/ 11" Long Red Conspicuity Reflective Tape - (8) 18" Strips
I think these are great products
Going to lake and forgot to raise jack on trailer and bent jack at trailer and jack had a 45 degree slant / bend. replaced it with a " etrailer.com jack", more affordable than Walmart and Bass Pro !!!!!! Ordered reflective strips to place on back of boat motor , back of boat and trailer receiver. Etrailer.com prices are SO MUCH MORE lower than any other place I have found and / or shop at. With such a large inventory online, I'll be shopping here more often. AND shipping and service is FAST!!!!
# 12
Optronics Thinline LED Trailer Fender Light w/ Bracket - Submersible - 10 Diodes - Amber/Red Lens
These lights are definitely the best I could find for my applications, they are water prove, large, bright, and well designed. I replaced my boat trailer and dump trailer lights with those. If they damaged I don't need to unbolt them, just pull the light of the base and push a new one in. Excellent product and great customer service.
Really good lights, would be nice if a curved base option was available for curved wheel fenders. Needed to add shims to keep light base from bending
# 13
Optronics Thinline LED Trailer Clearance or Side Marker Light - Submersible - 4 Diodes - Red Lens
Wow, what a difference LED clearance lights make, especially at night. It makes my business information really stand out and people who follow me really notice that. I've been wanting to go LED the past couple years and now that I recently made the change, I'm not ever going back to standard low-level light bulbs again. Thanks etrailer for offering these lights and at a very affordable price. You were almost half the price as our local part store was selling them for, plus these are more stylish as well.
These guys are good,we build a few trailers in our shop, & these guys have the inventory, you get it fast & you can get them on the phone, we need more outfits like this to do business with! Thanks Guy's--
# 14
LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Red LEDs - Clear Lens
Great smal side markers. Used them at the top of my trailer for better visibility. Like the clear once since they blend in on the back of the trailer when not in use.
Excellent lights & a great lifetime warranty!
# 15
Optronics Mini LED Trailer License Plate Light w/ Chrome Housing - 2 Diodes - Rectangle - Clear Lens
So far this license plate light has worked flawlessly! The only reason I didn't give it 5 stars was that I thought the original light (same or very similar light) would last "forever" considering how much we use the trailer. In any case, this light thoroughly illuminates the license plate, so it's easy to see for the toll cameras in our area! I really appreciate the support and products that etrailer supplies. The other lights on my trailer (tail, turn, brake, clearance) have worked great, as long as I maintain a good ground connection on the wiring! I recently had a problem with intermittent lights (blinking on and off), that I eventually traced to a bad ground wire INSIDE the trailer-side wiring connection. I replaced the trailer-side connection, re-spliced the other wires, and wired everything through a weatherproof junction box that I bolted (drilled and tapped) to the side of the trailer tongue. The new ground wire is fastened securely to one of the threaded/bolted connections and seems to be working well so far. I used wired nuts to connect the other wires inside the weatherproof box, so it will be easy to replace connectors if they fail in the future.
These guys are good,we build a few trailers in our shop, & these guys have the inventory, you get it fast & you can get them on the phone, we need more outfits like this to do business with! Thanks Guy's--
# 16
Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber
Very bright light, same connectors as my 2001 Shoreland'r boat trailer, just had to plug them in. Cannot say enough about the staff at etrailer, very helpful.
SPLENDID! Popped the old incandescent Side Marker Lights out on my 2008 Triton 21X2 trailer and installed these Thinline LED Clearance and Side Marker Lights (both the AMBER and RED ones). Just Plug-N-Play and my boat trailer looks AWESOME! Shipping was a snap!
# 17
Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red
Perfect replacement running light for my lawn trailer.
Replaced the front and rear side running lights on my trailer. Purchased 2 amber and 2 red. These have the proper connection for my trailer and are very bright. Perfect replacement
# 18
Peterson Spitfire Low Profile Rectangular Trailer Reflector - Wide Angle - Stick On - Red
I have a trailer ordered. The manufacturer can't understand that his side marker lights are non-reflective, so I must add red and yellow reflectors. I do not have the trailer yet, but I've tested this product, and it's amazingly bright and reflective--much more than plastic ones. If the adhesive performs well and lasts, this will be the perfect solution.
All of the products ( trailer lights, wiring and reflectors ) are still functioning perfectly. Most of all, the service and follow up from eTrailer is thorough and thoughtful
What our customers are saying:
"I was very pleased with the promptness of the delivery of my order, and the products were exactly what I needed. I highly recommend your company to anyone needing anything to do with trailers. Thank you"