Most Popular Red for Chrysler Town and Country

I order a lot of stuff from Etrailer. I like the fast prompt delivery. I have however had two of these lights break the wires off right where they come out of the housing. Not long after installation. The wires were not hanging either.

Light was the same size as previous one on EZ Loader boat trailer. Easy to install and very bright. Original one made it 10 years and had moisture inside causing most of the LEDs to stop working.

Item arrived in very secured packing, shipping was fast, the quality is very good, I will buy again from you, Thank You.

Really cheap. These lights are marketed as submersible, but based on what's in the package I'm really dubious. The lens bodies are not sealed. As you can see My photo, each lens body has a clearance hole for the wire - No gasket, and plenty of room around the wire, So water will definitely flood in and submerge the contacts and bulb/socket If you put these on a boat trailer. Additionally, to Make the wire connections. They give you wire nuts. For submersible wire connections, at the very least, you should use crimp butts wrapped in tape - or better yet a heat shrink crimp butt. But they give you wire nuts, which aren't even really stable against vibration, let alone moisture. It does say 3-year warranty on the package, however, so I guess I'll be testing that out.

Installed the new lights today. Easy peasy. I grew up on a farm, in the country, and have been fixin' and futchin' with trailer lights since I was 6, it seems (I'm 74 now). Hopefully this is the last time I'll need to fix the lights on this particular trailer.

Fit perfectly where the old lights were. Perfect replacement.

Just like every other order from e trailer was

They look great installed. Only recommendation I can make is to include crimp connectors at least for the side marker lights and perhaps a small length of protective wire wrap. All in all I’m very pleased.

They are great! Everything was in there for putting them on! Will be ordering from them again! Thank you E Trailer!

When my 7 year old utility trailer lost it's lights, I looked for a solution. The package came quickly and was easy to install. It was a good idea to include the wiring kit along with the Lights because I installed the lights first and discovered that the problem wasn't solved. I then rewired the entire harness and it all works well. I would recommend one change - instead of the wire nuts, add a waterproof heat sealing connection - I soldered my wire connections using a heat shrink wrap. Also - waterproof tap in connections for the side running lights would be helpful.

I installed the new fender lights and they work great.

I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. My previous lights sat in the middle of the fender. These sit on the edge so you get a true picture of your edges at night.

Works as expected.

I installed these on my overland trailer project and they work perfectly

Great service and had the exact replacement tail lights for an older horse trailer that I was having a hard time finding. . It’s nice to order from a company that does and provides exactly what they say. Highly recommend.

The tail lights light has burt out. It still has blinker and break light but no running light so I need to purchase another one.

Same review again. Excellent product, easy to install; looks great.

And great reflectionness?? Now when I crash my trailer lights at least there'll be something back there to show I tried.

Great job guys

Easy install and bright marker light. I also used two on the top back side of my horse trailer as an extra turn signal and brake light. My existing turn signal and brake lights were really low on the trailer and these helped it become more visible when I was slowing down or turning.

These lights are really good for the price! (I ordered 16) They aren't cheap feeling or flimsy. They feel sturdy, durable and they look quality. The wires are the correct gauge and the light bulb is in a rubber grommet for weather sealing. The light is sealed very well and it takes some effort to remove the lens cover. The lens is thick and the color is true. The reflector is bright. I was genuinely impressed with lights especially for the cost. These will be replacing older side marker and clearance lights on my older 1985 Sunstream motor home. My lights are faded, some broken, mostly leaking and more costly to replace than what they are worth. These MC32RB and the Amber version lights will look great! Slightly different style, same size and better looking and better quality than the originals. Very happy with lights and etrailer. Will be ordering more items. Thanks. G.

I purchased red and amber lights to replace the faded and broken ones on my travel trailer. Camping World wasn't able to help me. Found you all while searching the internet. Great produce. Great price. Better than the originals. The screws that secure the lights to the trailer are protected from the weather (they are under the removable lens. Easy to install. Ended up replacing all eleven lights.

This light was exactly like described. I purchase a lot on line and use amazon prime for free shipping. I could not find this light on amazon and was very impressed that etrailer.com had very reasonable shipping prices. Instead of gouging the cost was in line what normal shipping cost would be. The shipping and tracking were spot on and the lights were delivered as promised. A VERY good company to work with.

I bought these lights for a boat trailer. They are very bright and we're easy to install. I would recommend to anyone looking for replacement lights

Fit perfectly where the old lights were. Perfect replacement.

Installed the new lights today. Easy peasy. I grew up on a farm, in the country, and have been fixin' and futchin' with trailer lights since I was 6, it seems (I'm 74 now). Hopefully this is the last time I'll need to fix the lights on this particular trailer.

Optronics makes really good trailer lights. They don't survive me backing my cattle trailer into poles, but that's my issue. My cattle trailer is 20 years old and originally came with old school bulbs. But Optronics makes LED replacements in the same form factor so I have upgraded as I break them. Nice to know I can still get newer LED bulbs for fixtures that are 20 years old. That's what you get with a company like Optronics. And, etrailer has the best technical descriptions and videos available so I know what I'm getting and that they will fit.

The lights work perfect, very pleased with my purchase

Exact replacement for Jayco running lights.

The light is identical to those oem on my mh. I bought this light as a spare so it has not been installed. I should connect it to 12v to ascertain it's status. The leads on the light are short at about 5 inches. Rating an item that has not been installed is not a good practice, but I received 3 emails from Etrailer requesting a rating.

Product was easy to identify on the website. Shipping and transit time was excellent Price point was very good I was replacing the lights on both sides of the trailer. Both were damaged, one of which was beyond identification. There was enough of the one side that I was able to estimate a replacement. The lights were exact replacements for the original lights. bolt patterns matched up exactly and the ground wire came with a connector already installed so installation was FAST. EVERYTHING I have received from etrailer.com has been spot on and easy to install.

I have a 2010 international trailer. I was unable to find exact match parts so I went to etrailer to find comparable parts. I replaced both fender lights on my trailer. They were easy to install and wired exactly as the previous lights. What I liked about these is that the light goes to the edge of the fender showing the exact edge. My previous lights sat in the middle. Minor detail but I liked it.

Awesome and bright. Definitely a step up from the stock ones. Thanks for the great product.

The light itself is decent, where it falls short is surface mounting. The hot and ground wires are of a decent gauge, however, the hole in the side of the lens is too small to pass both wires through it for a surface mounting. The only alternative is to drill another hole in your mounting spot which, on a heavy trailer such as mine, is very thick steel. See picture

Perfect, light matches exactly. Very satisfied with all my purchases: Hitch, aluminum truck rack, boat trailer lights, wiring harnesses…

Great replacement for the original incandescent tail light on my 1997 Shorelander boat trailer. Same hole pattern, so no drilling.

perfect replacement for broken markers on my trailer

This used to be a 16 foot travel trailer. I stripped it down to the frame and built it into a utility trailer using all lights and wiring from your folks. Love to you use you as I get quick turn around on orders and good quality merchandise. Thank you.

Chose Optronics because of warranty and help from customer service at etrailer. Staff is awesome, very knowledgeable. Light is very bright, installation very easy, all holes lined up with factory holes on a 2001 Shoreland'r boat trailer

The lights fit and function perfectly. Beware of the USPS, however. Their tracking system is terrible, but that is a whole separate issue. Etrailer did an excellent job.