# 1
Hitch Extender For 2" Trailer Hitch Receiver 7"
Another good experience with Etrailer. Easy site navigation and prompt delivery. I needed this extender so my 'basket' will clear the spare tire on the back of my Wrangler.. and it does just that. The 7" gives you plenty of room. A 3" would probably be all that's necessary. Also lets me flip up my Thule platform bike rack into the stow position. Two thumbs up!
Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.
# 2
Hitch Extender for 2" Trailer Hitches - 8" Long
This product has done just what I needed to get my bicycle rack mounted out beyond the spare tire on my Jeep Wrangler. As a bonus when the bike rack is not on; I have left in it as a step for climbing into the back of the Jeep. I use this product with the Curt Anti-Rattle Kit C22321 and it keeps my bicycle rack rock solid.
The length of this extension is perfect for my Jeep Wrangler TJ with Hanson rear bumper and spare tire mount swing away. I then mount the Swagman bike rack and the bikes easily clear the spare tire.
# 3
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Meaty and does the job. With an additional 1-1/2" drop built into my Demco Commander II tow bar, it's a perfect fit to hitch my 2021 Jeep Wrangler to my 2020 Winnebago View. I haven't tried it yet, but I'm hoping to be able to fit a bike rack between the two vehicles.
I purchased this product to add a platform above my tow bar. I flat tow a Jeep Wrangler unlimited behind a Monaco Windsor Motorhome and have no place to carry a spare tire. I will build a tire rack to fit the top receiver. I trust Roadmaster Products. and etrailer.com's price and service is outstanding. Great job etrailer.com
# 4
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 2" Rise/Drop - 10K GTW, 400 lbs TW
Works well on my 2014 Wrangler Unlimited. Yakima Swing Daddy - 4 bike rack. I am able to open the gate completely until it locks.
I run a motorhome during the summer. I changed towed vehicles from a Truck to a SUV. This Hi/Lo receiver is what I required to ensure a straight tow. I went with the heavier 10K rating. Etrailer may not be the cheapest on the net, however very reliable. The picture shows the finish tow setup. The piece above everything is a motorcycle lift.
# 5
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Functions as designed: The extension allows my bike rack to clear the rear tire on my Jeep. I added a tightening lock to secure it in place and now have no rattle or shake on the rack. Happy Jeep Owner
This item worked great for my bicycle rack that I installed on my jeep. I have a 2" hitch on my bumper. Needed a 1-1/4" adapter hitch, so my bike rack would fit.
# 6
Advantage SportsRack Hitch Extender for 2" Trailer Hitches - 11" Long
# 7
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
This is a much higher quality (thick and heavy) than I imagined it would be; I'm pleasantly surprised. I'll be using it to mount a trailer hitch cargo carrier and a dog step at the same time when we go on long vacations.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 8
Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
Perfect hitch addition to extend past the big spare tire on my Wrangler XL. Glad I got the anti-vibration version of the hitch extension.
Fast shipping and a good product.
# 9
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
I purchased the hitch extension to accomendate our bike rack to go on the back of our truckcamper. I also purchased the bike rack and steps at all work perfectly together. The extension is very heavy duty and can be used for towing a boat. The only con was not the extension it was the packageing it beat itself up. I also added turnbuckles and safety chain and electrical extension.
# 10
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long
Perfect for my application. My rack now clears the spare time on my Jeep Wrangler.
I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.
# 11
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
Very nice, heavy duty extension.
Would purchase again little longer than expected
# 12
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
Great product. Meet my needs. I used it on my Wife's Jeep Wrangler to extend her bike rack away from the spare tire
The hitch arrived as promised and is as described. It's just what we were looking for to adapt our bike carrier for use on our new Jeep Wrangler.
# 13
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
It worked, till it didn't. It's a short smaller tube inside a larger tube, only held together by two spot welds. The spot welds split/detached allowing the inner sleeve free movement! I have a bike w stinger expanded to grip the inner tube and a little safety catch on outside. The safety catch was the only thing keeping my rack from sliding completely off! For the price this should've been a solid milled piece. Don't rely on these welds unless you have two through hitch pins one on car and one through the adapter end.
Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.
# 14
Curt Extender for 2" Hitch Receivers -18" Long
Received my 18" extender for my 2" receiver in 3 days. It's going to work perfectly, enabling me to haul bikes with the Thule spare me bike rack at the same time as cargo on a luggage rack at the end of the 18" extender on my Jeep Wrangler. Product is super heavy, therefore, super durable.
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
# 15
Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
Perfect fit to extend hitch from under spare tire on my Jeep Wrangler.
I have included some photos of the hitch extension. The first two are just on my truck without and with the extension. Without the extension, note the proximity of bike handlebars to the tailgate. In the second photo with the extension, the handlebars are much removed from the tailgate. Note that this is a ¾ ton truck with an insert in the receiver. With the insert in place, the front holes of extension did not align with the receiver. It was short 1/8 to 3/16 inch. If needed, I could solve this issue with a smaller bolt. The next photos are without and with the extension in the receiver of our RV. With the cover on RV the dramatic effect of extension is not so obvious. In the first photo without the extension, the handlebars of bike literally contact the back of RV. In contrast in the second photo, the handlebars are 5 to 6 inches from the back of the RV. Though there are no road trips yet, I am confident that the hitch extension will protect the bike and importantly will protect the back of the RV. I hope that these comments and photos are useful to you. If no, I can try again in spring when we remove cover from the RV.
# 16
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
The Yakima swing arm provided just what we needed to allow the use of the Hollywood RV Rider bike rack behind our 2023 Wrangler JL.
This is awesome. I am now able to use the back door on my Jeep and still keep my bike on the rack. This is my second item purchased from e-trailer. You need to let the people of Rad electric bike know about your great products. I am posting some pictures on the Facebook page for the other owners. Thanks again
# 17
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long
The 4 foot hitch performed great. I bought the extra lenght to get it further behind my truck camper, I have a 3 foot hang over. The only problem was this made my 20 foot welded flat boat catch a lot of wind knocking my fuel milage way down. It also does not let my steps fold down. I should have gone with the 3 foot extension. live and learn.
Wow. Who would have believed I could have my heavy 11.5' Camper (which was well stocked, I should add) and pull a cargo trailer loaded with shop tools, workbench, and hardware. Handled well on highways through mountain passes, etc. Assembly and installation should have been much easier but the poor quality of the photos with the instructions was a bit of an impediment.
# 18
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
I need an 8 inch drop between my Itasca motorhome and the Jeep Wrangler I tow behind it. Had a basic Roadmaster drop hitch before I added a bike carrier. Daisy-chained a dual hitch adapter in and was ok going to Florida from New England and back last winter with the two adapters in line together. But heading to Alaska this summer and wasn't comfortable with the extra points of failure. This Roadmaster hitch gives me the drop I need for towing and the second reciever for the bike rack in a single safe package. And kudos to eTraileelr for the very fast shipping. We leave for the great north tomorrow!! .
The Hitch adapter works great. It lined up perfectly with my Jeep Wrangler w/ 4 inch lift. I’ve used it on my Winnebago mainly for long trips and it is a beast! Tows the Jeep easily.
# 19
Reese Titan Reducer Sleeve 2-1/2" to 2"
This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.
This is a good quality reducer.
# 20
Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise
Well built product and did what I needed it to do. The rise part of the receiver to install a bicycle rack to keep it above my tow vehicle a lifted Jeep Wrangler. The only negative is the receiver tube on the bottom now drops the hitch basically 2 1/2 inches lower and I now drag the receiver on the ground on driveway / street dips. Would have been better if none rise came straight out. I don’t think I would drag then I should have done more measurements
Excellent service, good prices and super fast shipping. 2 different orders arrived in 2 days! Thanks for everything eTrailer and William!
What our customers are saying:
"Ordered the part on Saturday and had it by Wednesday. $35-$75 cheaper than I could find anywhere else. I plan on using this site again."