# 1
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
This is a well designed rack. Adding and removing bikes is quick & easy. Just set the bike on & slide the padded hook down onto the bike frame to secure it; no straps required. If only one bike is transported, it does not interfere with opening the trunk on our Tesla Model 3. With 2 bicycles the trunk cannot be opened. For 2 bikes the Swagman model that can tilt might be worth the extra 22 bucks. This rack uses a bolt in the receiver hitch instead of a pin. This locks it securely preventing it from moving in the hitch & rattling. It also requires a wrench to remove it, good for theft prevention but one more thing to keep track of. For storage on the vehicle the top bar folds down. For storage in the garage, the left & right bars fold up & you can hang it using one of the hooks.
So far so good. The rack wiggles a bit, but that is expected. I have it on my 2007 Corolla and I have hit 65+ on the highway with it and have not had a problem. I would recommend getting a locking pin. The one included is threaded, which aside from security, makes it harder to take the rack on and off. I would also look into a DIY way to secure the wheels better. I am using some bungee straps which do the job no problem. The two bikes I carry are at the racks capacity.
# 2
Yakima HoldUp Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount
I just installed this on Friday and we used it for a short trip to the bike shop. So far, it is not bad. I had to laugh; Yakima applied their logo upside-down! I read the directions at least 3x to be sure I didn't have them reversed...I did it right. The directions also show a logo on both, upper & lower rack. I guess they wanted to save some $$ ? Assembly was easy with just three steps. The hitch has a lock to lock it to the car, which is great, but the cover won't stay on. It takes 2 hands, one to hold the lock in place and the other to try to put the cover over the lock. It just pops off the second you release pressure. I will try again in warmer weather, then tape it on so hopefully it will mold to the lock and eventually stay put without the tape. I am not convinced of the stability of the bikes, really. Going over bumps they do shake. For safety, we are going to add straps from the luggage rack and through the bikes, just in case. I really like the cable locks to secure the bikes to the rack. With our old rack there really wasn't a way to lock the bikes to the rack, and I always worried when we were traveling and stopped for food.
Best bike rack ever! Solidly built, reliable, sturdy. Plus the customer service of this company is outstanding. They are knowledgeable, keep you informed, respond to emails quickly and satisfactorily. Definitely will continue being my go to company!
# 3
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I was sent additional mounting materials that don't correspond with my hitch or my bike rack. See the photo below. Are these materials for my Swagman STC2 Bike Rack Item #S64670?
Just put it together and that was easy. Still waiting to use it this summer. Expect it to be perfect as I've use an XCT 4 bike rack for 12 years. It's still fine but I don't need to carry that many bikes and wanted a lighter rack.
# 4
Yakima HangOut 2 Bike Rack - Trunk Mount - Adjustable Arms
The only negative is that the "Bike Safety Strap" was not included in the box. Beyond that the rack was in good condition and fit well on my car.
Easy to install. Holds my mountain bike in place well, no issues.
# 5
Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.
Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.
# 6
Hollywood Racks Destination Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
A very good, inexpensive, lightweight bike rack. Folds nicely and doesn't interfere with the hatch opening on our 2023 XC40. I wouldn't consider this a heavy duty rack, more suitable for short trips to the riding trails. Good for urban living, as opposed to 4 wheeling out to a mountain destination. Several plastic components. Two things I dislike is 1) the hitch pin lock is cheesy plastic, and because of the threading bolt on the rack's hitch, you can't use a sturdier 5/8" locking pin. and 2) the cotter pins should have a small security cable.
I am very pleased with this hitch! Fit my bikes very nicely. Easy to assemble. Rack looks great on my Mazda cx-30. Customer service is very responsive.
# 7
Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
I've been looking a eBike racks for about a month and finally decided on this Swagman rack because it's rated for use on an RV. That's what I needed because it will be on the back of my travel trailer. I had it on my wish list on another site but etrailer had it for $[XX] less, so I jumped on it. It was fairly easy to put together, I installed it on the hitch on my truck so I wouldn't have to wrestle with it on the floor of my garage, that made it easy to assemble. This rack is very well built, and is very solid, it doesn't move while on the hitch on my truck (I installed the RV hardware) so I have no doubt that in will be fine on the back of mhy travel trailer.
So far so good! I have used it on the back of my Jeep Grand Cherokee and on the back of our travel trailer. It is a pretty solid e-bike rack. I would definitely recommend this e-bike rack. We did purchase it for using on our travel trailer, but also works great on the back of our cars, which have 2" hitch receivers. On the travel trailer we also installed a Draw-Tite Hitch, along with a Curt 14" hitch extender for 2" trailer hitches and a Malone anti-rattle hitch lock system. We purchased everything from etrailer. I am very happy with how all of this works together for hauling our e-bikes on the back of our travel trailer.
# 8
Saris Door County Bike Rack for 2 Electric Bikes - Electric Lift - 2" Hitches - Frame Mount
For the price, the quality really isn't there. The tail lights are not weatherproof and use clunky incandescent lamps which are a PITA to remove. The backup light is only implemented on the right side. Both could have had backup lights for the addition of one bulb and the connection of one more wire. And the mount doesn't really fit my step-through Specialized COMO ebike. If the frame had been slightly higher, that would have helped a lot. If I'd been able to try the rack locally, I would not have kept it. But the cost to return makes that prohibitive
My husband bought the bike rake specifically to carry out 2 Specialized Ebike’s which weight 62 to 65 pounds each. MWith this rake I don’t have to lift my bike up which is great when I’m alone. The only problem I’ve had is the outside bike straps. One of the ratchets broke and E-Trailer was wonderful in helping get us a replacement. My husband put the new one on. I do have friend’s that will be purchasing them in spring. The only complaints I have would be to Saris. Placement of the outside straps. It’s awkward latching them. Also, when my husband bought the rack the maximum weight load was more. They changed it to a lower amount.
# 9
Yakima OnRamp Bike Rack for 2 Electric Bikes - 1-1/4" Hitches - Frame Mount
We assembled it and attached it to the car but we haven't used it yet so it is bit early to rate it but it definitely well made and it should work just as we had planned.
We love this rack. Both my wife and I use it all the time. I can mount and remove it in less than 5 minutes. I often transport 2 substantial ebikes. When we ride together, either of us is able to load and unload both of our bikes in less than 8 minutes. This is a solid rack and the price was definitely right. And when not in use it folds up neatly behind the bumper.
# 10
Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!
The Thule Passage Trunk Bike Rake for 2 bikes is a good product. I used it to transport my mountain e-bike. I choose this particular unit because it can handle the weight 2 of bikes (non-e-bikes) and the weight of my e-bike is equivalent to weight of 2 bikes. Note: Must readjust the straps after mounting the bike to the rake.
# 11
Hollywood Racks Trail Rider Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I like it a lot! I think it has solved my issue with having in easy, yet stable way to haul my bike on my 2012 Honda accord coupe. It's only been one day, so I can't speak about the durability. But it's definitely use a friendly and sturdy.
I looked at a LOT of bike racks, but when I saw the product video for this Hollywood rack and it was holding the bikes rock solid, no loose bouncing anywhere, I decided to try it and I haven't been disappointed yet. It is solid in the mount, it holds the bikes securely and the locking bars are a good deterrent to anyone wanting a quick steal. I don't leave mine on the car all the time, but so far in the weather here in Florida, it's holding up nicely. Add all this to the great price and customer service from etrailer.com and it's a big win for the average consumer. Thanks, etrailer!
# 12
Hollywood Racks Destination Bike Rack for 4 Bikes - 2" Hitches - Frame Mount
Super easy to load 4 bikes and go. Takes me 5 minutes to get all 4 on the rack, compared to 15-20 with the rack I had before. I would change nothing honestly. It's a fantastic rack. It has performed great. I can now quickly load 2 kids bikes and 2 adult bikes on the rack with no special adapters. We can hit trails faster and spend more time riding. There is no real downside. It's also significantly cheaper than competitors and provides a much easier and smooth experience. Is it a great rack for small families who want to ride together. No adapters needed for different sized bikes and super easy to load and unload. I would not recommend this particular model if you don't plan on using more than 2 slots. But for 3 or 4 it rules.
One year in and it is great. I have a 2021 Subaru accent and it is perfect. We carry 4 adult bikes and while it is a tight fit it works great. The rack is VERY solid and does not move when tightened up. Over the past year we have used it 3-4 times with no issues so far. It is easy to use and one person can easily load and unload the bikes. The tilt up feature is nice and when the rack is down and there are no bikes we can open the back hatch without an issue and there is plenty of clearance. We have been very happy with the performance and the price.
# 13
Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gunmetal Gray
Fantastic bike rack. Switch it between a Honda Ridgeline and a Subaru Outback Wilderness and it works perfectly. Accidentally lost the locking pin that secures the rack to the trailer hitch and when I inquired with Kurt about ordering a replacement lock keyed to match the locking cables on the rack and the Kuat rep sent one to me for free. (I removed the rack and left the lock sitting on my car bumper. Later that day I drove off and lost the lock on the highway).
Rack arrived today. I will not lie, it is heavy and therefore cumbersome to assemble. Despite that, I was able to assemble and install it in just under one hour. I did this on my own, another person would have cut this time in half. The rack checks all the boxes of wants and needs. That same weight noted before makes it rock solid. The anti-rattle feature to tighten the hitch is wonderful. Handle/pedal to change from upright position to bike holding rack to tilt away from my Subaru 2010 Forester was incredibly simple and smooth. I was all set to buy the Thule T2 Pro XT 2 and a friend told me about this Kuat NV 2.0. I am so happy. I knew it was more expensive, but free shipping and price was discounted at checkout when I purchased it from etrailer.com. Great surprise. This rack is well thought out, has superb quality features, and I am convinced that I made the best choice. All things aside, it also really looks nice.
# 14
Saris SuperClamp EX Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount
I can't say enough good things about this bike rack.I was going to go with a cheaper model but I'm glad I spent the extra money for this Saris.The rack installs and comes off the hitch quickly.The bikes also are easy to load and unload.This thing is great.The first one got ruined by the carrier and etrailer sent me out a new one immediately.Top notch service.
Thanks to etrailer’s excellent information, I managed to find a bike rack that would carry 2 e-bikes and work with my existing class I 1-1/4 in receiver. I had the added challenge that I carry the bikes on a car that I tow behind my RV, so it needed to be rated for a tow vehicle. The Saris Superclamp EX met all my criteria, and for a reasonable price. I was also happy to find that it’s made in the USA. Install was fairly easy, couple of minor hiccup’s as I figured out the drawings, which, to be honest, weren’t entirely clear. But it’s pretty intuitive, so just added an extra minute or two, and probably wouldn’t phase the more mechanically minded. I’m a somewhat out of shape 50’s female, and I don’t have any trouble moving the rack around, it’s a nice weight and fairly compact when collapsed. It’s very easy to access the hatch when the bikes are not mounted. Haven’t tried it with bikes on yet. Once installed, it is rock solid. Loading my 45ish lb bike (with battery removed) is doable. In a perfect world it would have a ramp, but given my other criteria were met, I’m happy to do without the ramp. The rack seems like it holds the bike firmly during transport so overall, I’m extremely happy with my purchase. Also, there wasn’t a ton of unnecessary packaging to get rid of, but things were well protected in shipment. Customer service from etrailer is stellar as well, they helped quickly with a minor issue. Happy customer here!
# 15
Yakima RidgeBack Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
Heavy duty. Well made and designed. Easy to install and load. Just arrived so I’ll let you know about the durability.
I used this product twice to go back and forth on a 700 mile trip (1400 miles total). My initial impression was that it was sturdy because it was larger than most 2 bike carriers I've seen. The strapping system is convenient and the locking system worked great. The only flaw so far is that one of the locking mechanisms actually broke off. After closer inspection, I realized that the parts are plastic. I'm not sure what actually caused it to break other than the force of hitting a pothole causing the bike to bounce on the rack. Those types of forces should be expected with normal driving however and I expected the locking mechanism to hold up. I was fairly disappointed that it happened given the asking price and the reviews I read prior to my purchase. Other than the locking mechanism on the actual bike rack, I wouldn't put to much faith in the red handled locking pin that inserts into the trailer hitch and insertion bar portion of the bike rack. It is understood that the pin does not go all the way through the insertion bar as the locking mechanism is inside and prevents further advancement. Yakima could probably improve this aspect of the product. I will be contacting Yakima to see if they will replace the broken part. One thing I did notice was that the broken bracket is screwed in and can be removed/replaced fairly easily. I have included pics of the broken bracket and working bracket for comparison. Hope this helps in your decision!
# 16
Softride Hang2 Vertical Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
Neat design. That's the only positive. Shows up in a million pieces. Surface rust on some of it already. Need a hammer to use "quick release" pins to pivot. 1 1/4" adapter is not long enough for either car I tried, unless your hitch sticks out PAST your bumper don't even bother. Had to trim 2" section of rack to make it fit hitch. Had to grease pivot section because rough surface finish would NOT allow rack to pivot. If I didn't need it (and didn't spend 2 hours assembling) I would have sent it back. Worst bike rack I've bought since a K-mart contraption 30 years ago.
The bike rack is made for bikes with no fender, our bikes have fenders and a rack over the back tire. We added some padding for the back tire so the rack doesn't get scratched, it works just fine our bikes are secure.
# 17
RockyMounts MonoRail Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
Good mount over-all. Item was delivered without the packing straps. Not sure if the package was opened prior to shipping. There were no missing parts. The mount seems to function normally. I do have one complaint - the mount is not level when attached to my Ridgeline 2" hitch. My hitch is in perfect condition - unused prior to the purchase of this mount. The mounting bolt for the hitch is fully tight, but still the mount is crooked to right by 1 inch. Oh well - not a deal breaker.
We have two e-bikes and researched for a rack substantial enough to carry them long distances. The RockyMounts Monorail is doing the trick. We remove the batteries and seats. Based on other's advice, we put pieces of foam pipe insulation over the straps and braces that contact the bikes. Also, just for overkill, put additional cinch straps over the front tire rim at the wheel support. I also fabricated a license plate holder because the plate is obstructed on the SUV. The quality of construction and ease of assembly are both outstanding.
# 18
Swagman XTC2 TILT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
We had an unusual situation. This bike carrier seemed to be the best starting point. We are pulling a sailplane trailer with an RV but wanted to bring a large E-bike with us but not fill the RV. We adapted the provided receiver mount to clamp on the trailer tongue. It made the trip from north NJ to central SC fine. You can see how it worked out, it even retained the tilt.
Easy to use, light and does a great job keeping my mountain bike secure. has held up well for the year that I've had it. I assume it will hold up for a couple more at least. The only thing I'll need to replace is the rubber straps. The sun and stretching takes it's toll on them. Great price compared to all the big names and again, does the job well!
# 19
Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.
GI love the Rack, it is easy for me to handle, (as a 89 yearold rider.), two bikes ride and fit very nicely. Like how it folds down,and how it folds to open the tailgate . Great quality for the money, I would highly recommend this rack
# 20
Curt Bike Rack for 4 Bikes - 2" Hitches - Tilting
This rack has worked well for us. I fits the Curt hitch perfectly. It is easy to attach bicycles securely. We can get three adult bicycles on this hitch (see photo). There are sufficient means to protect against sway.
In all a very good rack. Stable and good haptic. What does Not Align with its good quality is the Little screw that tightens the tilt arm so it does not „wobble“. Just a question of time until the Little Whole where its Screwed in (2mm thik Metal Plate) gets „screwed up“ or the arm breaks because of the pressure against it.
What our customers are saying:
"I ordered a trailer hitch and bike rack for my 2002 Pontiac Grand AM. Got both in less than a week and the total package delivered to my door was $10.00 cheaper than what I was quoted for just the trailer hitch at other stores. (great service and great price)"