Best 2016 Ford Explorer Hitch Adapters

The product looks like good quality. I bought it to use a 1 1/4" bike carrier in a 2" receiver. I have not used it yet, however.

Nice product works great

It worked, till it didn't. It's a short smaller tube inside a larger tube, only held together by two spot welds. The spot welds split/detached allowing the inner sleeve free movement! I have a bike w stinger expanded to grip the inner tube and a little safety catch on outside. The safety catch was the only thing keeping my rack from sliding completely off! For the price this should've been a solid milled piece. Don't rely on these welds unless you have two through hitch pins one on car and one through the adapter end.

Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.

As advertised, delivered quickly, very stout and sturdy built out of solid square steel, not tubing. Powder coated for great lasting appearance. Very satisfied with this purchase. Haven't used the quiet hitch yet, but it looks to be well made and engineered.

Works well on my 2014 Wrangler Unlimited. Yakima Swing Daddy - 4 bike rack. I am able to open the gate completely until it locks.

etrailer's Customer Service, Delivery, and Quality Products are Great! Every question and concern I had was promptly replied to and was rectified

The adapter seems to be of very good quality. Before looking at etrailer I'd been having a hard time finding adapters that had both the 5/8" hole (#3 pin) for attachment to my 2" trailer hitch, and a 1/2" diameter hole to attach the 1-1/4" bike rack. Some just had one size holes, others had terrible reviews. The fit is good, though there is some wiggle room. From all the reviews I've seen, ALL adapters have some movement, and the only solution is adding a locking collar, which I may do after I've tried it for a while (I just got it today). Bottom line, I'm happy with my purchase.

2” or 4” up/down is the solution I needed for a flat tow, 4” lower drop and a 2 bike rack, 2” rise. Very well constructed and looking for years of service out of this drop/rise combination!

Wanted to be able to combine tow hitch and bike hitch. This required a 2" drop and a 4" rise with a 10K lb capability. Etrailer.com came thru with product, price, special free shipping, and great customer service. Ordered on Sun and received on Wed and installed on Thur and ready to go!

This hitch adapter is just what the doctor ordered!! It met my needs in making it possible to "adapt" a rear cargo carrier to our 2007 Ford Explorer. This gives us extra capacity to transport wedding-related items from our home in Columbus, OH to Battle Creek, MI without having to rent a trailer or use two vehicles. Not only that, etrailer.com "performed a miracle" in getting this delivered in 2 days at no extra cost!! GREAT JOB in supplying what we needed, when we needed it, at a price we could afford.

Product was delivered on-time as expected. This adapter is being used on a Volvo XC60 with a retractable receiver. Although it fit in the receiver the locking hitch pin did go all the way thru without a little brute force. Not sure if it is a receiver, adapter, or a hitch pin problem. Would have been nice to have a little more guidance.

Made in China!!! NOT HAPPY ABOUT THAT..........

I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!

GREAT FOR THE FRONT HITCH THE HOLLOW EXTENTION IS SO EASY TO HANDLE

I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.

I needed this extension for a bike carrier on my Explorer, now I don't have to remove a peddle. It works great.

Just received my 80307 Hitch Extender for 2" Trailer Hitches - 8" Long. My newly upsized spare tire had been preventing the use of my hitch rack. Was very pleased with the etrailer service and the ease of using the website. The excellent descriptions, photos, and even videos really help shopping for these types of specialty parts. Shipping went well and expediently. I trial fit the extension with my hitch rack today, and the photos are attached. It fit well and did the trick. I drove around and heard no rattles from it at all.

Rattle’s excessively when there is not a load. the dual hitch is great. I am able to tow my trailer and carry my bike rack

Great double hitch adapter! Very well made and strong!

Would purchase again little longer than expected

I would like to have the actual distance from the weld joint to the hitch pin hole of 4 1/2". This unit is slightly less than that.

Does exactly what I need it to. Have '06 explorer pulling a motor cycle trailer - have to keep it level and this did the trick

The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.

I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.

Good quality, heavy duty took a couple extra days to get here otherwise great product

This is a much higher quality (thick and heavy) than I imagined it would be; I'm pleasantly surprised. I'll be using it to mount a trailer hitch cargo carrier and a dog step at the same time when we go on long vacations.

The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.

This hitch worked well on my Kona electric. Etrailer provides outstanding service. Will definitely purchase from this quality company again.

High quality part! It was exactly what I needed. This is pretty easy to use with the only challenge being lining up the holes with the receiver and the hitch. Still pretty easy.

I purchase this to use with a Thule bike rack. The Thule rack requires a 2-in receiver so this should have worked. However it's so shaky and loose that I didn't feel comfortable driving it down the street. I should have returned it but I went back to using another vehicle I have with a 2-in receiver.

Hitch pin hole was too far up the shaft and couldn't lock into the receiver. Had to return.

This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.

This is a good quality reducer.

Perfect for SUV with spare wheel mounted to rear door. Mounted on my Hummer EV SUV and it's been a game changed for towing!

I recently bought a truck tent that sets up over the open tailgate. I have a bump/step that became totally useless as it was covered by the tailgate. Then I came across the ST18 extension. Now after the tent is set up, I install the extension then the bump/step itself and your able to step up and into the tent with no problems, and it's also extremely stable!

Worked as it should. Fitment is super tight on my 2020 F350. I would buy this again.

Great customer service

Product quality is fine, however, tried to use with an ebike rack on upper hitch and flat tow hitch on bottom. Vehicle sway at highway speeds was too much, and I found bike rack on back of the towed Jeep was better.

Works great. We're towing a jeep and have a bike rack behind our motor home.