# 1
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
The product looks like good quality. I bought it to use a 1 1/4" bike carrier in a 2" receiver. I have not used it yet, however.
Nice product works great
# 2
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
It worked, till it didn't. It's a short smaller tube inside a larger tube, only held together by two spot welds. The spot welds split/detached allowing the inner sleeve free movement! I have a bike w stinger expanded to grip the inner tube and a little safety catch on outside. The safety catch was the only thing keeping my rack from sliding completely off! For the price this should've been a solid milled piece. Don't rely on these welds unless you have two through hitch pins one on car and one through the adapter end.
Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.
# 3
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
etrailer's Customer Service, Delivery, and Quality Products are Great! Every question and concern I had was promptly replied to and was rectified
The adapter seems to be of very good quality. Before looking at etrailer I'd been having a hard time finding adapters that had both the 5/8" hole (#3 pin) for attachment to my 2" trailer hitch, and a 1/2" diameter hole to attach the 1-1/4" bike rack. Some just had one size holes, others had terrible reviews. The fit is good, though there is some wiggle room. From all the reviews I've seen, ALL adapters have some movement, and the only solution is adding a locking collar, which I may do after I've tried it for a while (I just got it today). Bottom line, I'm happy with my purchase.
# 4
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
This hitch adapter is just what the doctor ordered!! It met my needs in making it possible to "adapt" a rear cargo carrier to our 2007 Ford Explorer. This gives us extra capacity to transport wedding-related items from our home in Columbus, OH to Battle Creek, MI without having to rent a trailer or use two vehicles. Not only that, etrailer.com "performed a miracle" in getting this delivered in 2 days at no extra cost!! GREAT JOB in supplying what we needed, when we needed it, at a price we could afford.
Product was delivered on-time as expected. This adapter is being used on a Volvo XC60 with a retractable receiver. Although it fit in the receiver the locking hitch pin did go all the way thru without a little brute force. Not sure if it is a receiver, adapter, or a hitch pin problem. Would have been nice to have a little more guidance.
# 5
Curt Extender for 2" Hitch Receivers -18" Long
Made in China!!! NOT HAPPY ABOUT THAT..........
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
# 6
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long
GREAT FOR THE FRONT HITCH THE HOLLOW EXTENTION IS SO EASY TO HANDLE
I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.
# 7
Curt Hitch Extender for 2" Hitch Receivers - 8" Long
The product is 5 star, packaging and shipping is a 0. I am not sure how this hitch extender ever made it to my residence due to the lack of proper packaging (see photo.) When the package arrived, I did not need to open the box, I only had to reach throught the hole and pull it out. This is not the first time I've had issues with etrailer packaging. When I ordered the extender, the screen showed I would receive it Saturday. Received it 3 days later.
# 8
Hitch Extender for 2" Trailer Hitches - 8" Long
I needed this extension for a bike carrier on my Explorer, now I don't have to remove a peddle. It works great.
Just received my 80307 Hitch Extender for 2" Trailer Hitches - 8" Long. My newly upsized spare tire had been preventing the use of my hitch rack. Was very pleased with the etrailer service and the ease of using the website. The excellent descriptions, photos, and even videos really help shopping for these types of specialty parts. Shipping went well and expediently. I trial fit the extension with my hitch rack today, and the photos are attached. It fit well and did the trick. I drove around and heard no rattles from it at all.
# 9
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
Would purchase again little longer than expected
I would like to have the actual distance from the weld joint to the hitch pin hole of 4 1/2". This unit is slightly less than that.
# 10
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
Does exactly what I need it to. Have '06 explorer pulling a motor cycle trailer - have to keep it level and this did the trick
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
# 11
Hitch Extender For 2" Trailer Hitch Receiver 7"
I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.
Good quality, heavy duty took a couple extra days to get here otherwise great product
# 12
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
This hitch worked well on my Kona electric. Etrailer provides outstanding service. Will definitely purchase from this quality company again.
High quality part! It was exactly what I needed. This is pretty easy to use with the only challenge being lining up the holes with the receiver and the hitch. Still pretty easy.
# 13
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only)
I purchase this to use with a Thule bike rack. The Thule rack requires a 2-in receiver so this should have worked. However it's so shaky and loose that I didn't feel comfortable driving it down the street. I should have returned it but I went back to using another vehicle I have with a 2-in receiver.
Hitch pin hole was too far up the shaft and couldn't lock into the receiver. Had to return.
# 14
Reese Titan Reducer Sleeve 2-1/2" to 2"
This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.
This is a good quality reducer.
# 15
Brophy Hitch Extender with Step - 2" Hitches - 18" Long - 6-1/2" x 17" Platform
Perfect for SUV with spare wheel mounted to rear door. Mounted on my Hummer EV SUV and it's been a game changed for towing!
I recently bought a truck tent that sets up over the open tailgate. I have a bump/step that became totally useless as it was covered by the tailgate. Then I came across the ST18 extension. Now after the tent is set up, I install the extension then the bump/step itself and your able to step up and into the tent with no problems, and it's also extremely stable!
# 16
Buyers Products 3" to 2" Receiver Tube Adapter
Worked as it should. Fitment is super tight on my 2020 F350. I would buy this again.
Great customer service
# 17
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We used this to be able to take our golf cart in the bed of our truck while pulling our travel trailer. This extender allowed us to have the tailgate down for the golf cart. It worked perfect and even had a couple people come up to us wondering how we were able to bring our golf cart. Before this we had to take 2 vehicles or just not take the golf cart.
Works great!
# 18
Malone 2" Dual Purpose Hitch Receiver
Heavy duty. Probably overkill for our e-bike rack but we needed it lower. Thanks for the fast delivery.
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
# 19
Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long
Works Perfectly!...nice and snug for my thule 2 bike rack>
Use it to allow me to use my bike rack on my pickup truck
What our customers are saying:
"Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!"