Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Buyers Products 3" to 2" Hitch Adapter is a reducer sleeve that slides inside a 3" receiver. It is constructed with rounded corners. It will not change towing capacity requirements. The adapter is zinc-plated for durability, with a 5/8" hitch pin hole. The hitch pin is sold separately.
Average Customer Rating: 4.5 out of 5 stars (93 Customer Reviews)
Worked as it should. Fitment is super tight on my 2020 F350. I would
buy this again.
Unfortunately this receiver adapter did not fit my Ford F250 3" hitch, way too tight.
Worked with Arthur from e-trailer to obtain a return/refund. After looking at reviews, I see many other folks had the same issue. If I were e-trailer I would pull this item from my product offering.
When I went to use this my bike rack would not fit in the 2" receiver because it was poorly made. Unfortunately it was well past etrailers 60 day return policy so they told me they would not help me. I contacted buyers myself and they were happy to help me and took the old one back and shipped me a new one that works great. If buyers did it for me, they certainly would have done it for etrailer but etrailer couldn't be bothered with it. I will buy buyers products again but will not buy anything from etrailer anymore. They also told me I would need to buy a whole new $XXX base for my bw companion hitch because the parts were not available. A quick call to bw and my. $XX parts were on their way. Again,poor service from etrailer. Back to local shops for me.
Working just like it’s supposed to be couldn’t ask for anything better.
Dreat to deal with
Great service
Fits loosely into my new 2021 Ford F350 Super Duty. Although it fits easy enough, it is sloppy and rattles a bit. Of course my Equalizer had a slight looseness in my old truck too. Now I am a little concerned that the adaptor slop will compound with the Equalizer movement to cause an unsafe condition. I'd rate it higher if I knew it would be totally safe and not compromise tongue weight or towing. I wish it would fit snugger into the truck hitch.
Darryl
4/21/2022
The sleeve works well enough, I spoke with a parts dealer and he told me a trick to take out the looseness. I purchased some cheap plastic door wedges and drove them between the receiver and sleeve. It really makes a snug fit without any problems.
Good value, well made
product worked out just fine / GREAT!!!
I thought the fit was a little wobbly. I haven't used it yet and not sure how it"s supposed to fit. This is replacing a 3 to 2 1/2 to 2inch adapter. The hitch side is solid but the insert into the 3 inch is not as tight as I think it should be.
Thomas M.
1/26/2022
You can use an anti-rattle hitch like the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-12 Hitches - 3-12 Span Part # SHP2040-XL to lessen the wobble in your towing setup.
Very poor quality. I ordered the MaxxTow Adjustable Tri-Ball Mount MT70197 at the same time I ordered this 337RTA302 adapter. The MaxxTow cannot be inserted into this adapter because the inside of the adapter is not squared and not smooth. I have many 2 inch shanks with different size balls, none of them can be inserted into this adapter 337RTA302, but one shank that was forced into this adapter. Once I forced the shank into this adapter, still cannot insert the 5/8 pin because the pin holes on the adapter are out of alignment. I wasted time and money buying this product.
Jenny N.
10/21/2021
I will have our customer service team reach out to you.
I tried to use this with four different 2 inch receivers and not one of them would fit. I would not purchase this product again or recommend to anyone else looking for a 3 inch to 2 inch adapter. I’m not sure how this manufacturer could let so many of them out into the marketplace when it simply does not work as advertised.
Jenny N.
7/21/2022
We did have this extender pulled to be tested and found that they had an engineering issue. I will have customer service team reach out to you. I recommend taking a look at part # e33YR as a replacement.
Fit & finish as well as customer service was great! Very nice experience!
Great service! Product is as advertised and great quality.
I bought this receiver adapter about a year ago. I pull a 26ft, 6500lb trailer with a load levelling hitch down to a jet ski, with individual ball receivers. The only difficulty is it won't handle all 3 positions of a 1-7/8", 2", & 2-5/16" triple head cluster, the pin holes in the adapter are too close.
Simple piece, but works as expected for my '22 Super Duty.
Previously I had to use two step down adapters. This adapter made lining up for to pin hole much easier. Good product and excellent etrailer service!
Chuck S.
7/1/2020
Still working great!
Will not fit any of my 2 inch hitches - the weld on the inside needs to be ground down for it to work. I even paid for overnight shipping as I needed it asap - guess I have to figure something out.
Jenny N.
7/25/2022
I am sorry that the hitch reducer is not working for you. We did have a batch from the manufacturer that was defective that is currently being corrected. I will have our customer service team reach out to you.
Just received this. I tried 4 different 2" hitches and none of them fit. I previously ordered this a month ago and that one didnt fit any of my hitches either. I reported that it looked like the outer flange that buyers product welded on was not in line with the 2" tubing. This one that e trailer sent me looks like the it has the same issues as before And, well guess what it still doesnt fit. 4 different hitches and none of them fit and they are standard over the counter 2" hitches. The problem is not on my end, it is buyers products and etrailer for sending me this unverified hunk of useless steel. I will be calling you to return this junk too. Not very happy.
This adapter is perfect for using a 2" hitch in a 3" receiver. I have 2 adapter sleeves that came with my truck and my previous truck had a single sleeve to adapter 2.5" down to 2". The problem with these sleeves is that you can remove the hitch and forget to take out the sleeve, leaving it to fall out next time you drive the truck. This adapter forces you to take out the pin to remove hitch and adapter or take out the smaller pin to remove only the hitch. No chance of suffering from a brain fart.
We needed an adapter for our RV to make our 3 inch receiver accept a 2 inch bike rack. The folks at etrailer were excellent. They explained what we needed and the price was very good also. I will definitely use them again
Purchased this adapter for use on my 2019 F-350.
I have a Yakima Dr. Tray hitch mounted bike rack. This adapter works perfectly between the 3” ford receiver and the 2” hitch mounted rack that incorporates both locking mechanisms.
I was received well on the phone. The person helping me was friendly and professional both. She was able to help take care of my product in need and sending back one I thought was right. Would definitely buy future products from them. They totally have it together there at etrailer.
Good product for a fair price. I have a fifth-wheel hitch but needed this reducer to pull smaller bumper pull trailers.
Very poor quality. It took an hour of grinding out the inside to get a 2" insert to fit into it. It did fit into the 3" trailor hitch with no modification necessary. In the end it works. Very disapontied.
Do you have a question about this Hitch Adapter?
Condition: Surface Scratches
Notes: Item has cosmetic scratches and paint chips. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/15/2023
There is another reducer part # C45408 that will work better for you.